Samsung 2BF0 User Manual

COLOR TELEVISION

CL21Z43/21Z45/21Z47/21Z50/

21Z57/21Z58/21AE0/21AF0/
21AJ0/21BF0/21BH0/21AM0/
21BA0

TX-T2041

Owner’s Instructions

Before operating, please read this manual carefully,

Register your product at www.samsung.com/global/register.

Control Panel (depending on the model)

The product color and shape may vary depending on the

➢

Front Panel

1 On-screen menu display
2 Volume adjustment
3 Channel selection
4 Remote control sensor
5 Indicator (Standby or Timer)
6 Power on/off

and retain it for future reference.

Record your Model and Serial number.

▪ Model __________ ▪ Serial No. __________

model.

Connection Panel (depending on the model)

The product color and shape may vary depending on the

➢

model.

1

2

Whenever you connect an audio or video system to your

➢

television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.

1 Audio/Video Output Jacks

Connect to the audio/video input jacks of a recording VCR.

2 Audio/Video Input Jacks

Connect to the audio/video output jacks of VCRs, DVD players

and similar devices.
Connect to Audio-L, when using the mono equipment.

3 Component Video Input Jacks (Y, PB, PR)

Connect to the Component video outputs of a DVD or DTV

set-top box. 480i video signal input is available.

When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.

4 ANT IN

Connect to an antenna or to a cable TV system.

3

3

4

Side JackRear Jack

1

2
3

Please be sure to match the color coded input terminals

➢

and cable jacks.

When both the side and rear jacks (AV IN 2) are

connected to external equipment, the side receives
priority.

1 Audio Input Jacks

Connect audio signals from a camcorder or video game.

2 Video Input Jack

Connect a video signal from a camcorder or video game.

3 Headphone Jack

Connect a set of external headphones to this jack for private
listening.

 The 2 and 3 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

 If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the
television.

English - 1

AA68-03992N-01

English - 2

Remote Control (depending on the model)

Operation of remote control may be affected by bright

➢

artificial light near to the TV.

4 MUTE

Used to switch the sound

off temporarily. To turn the
sound back on, press the

MUTE,
VOL++ or VOL-VOL-- button.

5 Numeric buttons

Used to select channels

directly.

6 INFO

Used to view the channel

information and setting
status you selected.

7 SOURCE

Used to display all of the

available video sources.

8 TOOLS (depending on

the model)
You can check the

following selection by
pressing Tools button.

1. Sleep Timer(Used to

select a preset time
interval for automatic
turn off.)

2. Picture Mode

Used to select the

picture effect.

3. Sound Mode

Used to select the

sound effect.

4. MTS(Multi-channel
Television Sound)
Press to choose
"Stereo" or "Mono" or"
SAP"

5. Turbo Plus

Used to select the

Turbo Plus option.

6. Equalizer

Used to select the

Equalizer option.

7. R.SURF
Press to automatically
return to a preferred
channel after a user
preset time delay.

8. EasyView

Used to display

Channel Grouping,
Channel Minimizer,
Channel Scheduler,
Music Mode, Half
Mute menu.

9 ENTER

While using the on-screen
menus, press the ENTER
button to activate
(or change) a particular
item.

0 EXIT

Used to exit from any

display or return to
normal viewing.

! PRE-CH

Used to switch repeatedly

between the last two
channels displayed.

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER button on the TV.

Caution: One pole switch is totally not off(one line still live)

➢

if power cord is not unplugged.

Viewing the Menus

1 Press the MENU button.

The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and

Setup.

2 Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3 Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4 Press the ▲/▼/◄/► button to change the selected items.

Press the MENU button to return to the previous menu.

5 Press the EXIT button to exit from the menu.

1 POWER

Used to switch the TV on

and off.

2 MENU

Used to display the on-

screen menu or return to
the previous menu.

3 ▲/▼/◄/►

Used to control the cursor

in the menu.

CH <, CH >

Used to display the

next or previous stored
channel

VOL +, VOL -

Used to increase or

decrease the volume.

Installing Batteries

Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate

normally, check that the “+” and “–” ends

of the batteries are inserted correctly or
the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

➢

English - 3

Setup - Plug & Play (depending on the model)

Input - Source List

When the TV is initially powered on, several basic customer

settings proceed automatically and subsequently.
The following settings are available.

1 Press the POWER button on

the remote control.
The message “Start Plug

& Play” is displayed. It

Plug & Play

Start Plug & Play

OK

Enter

Exit

flickers for a little while and
then Language menu is
automatically displayed.

2 Press the ▲ or ▼ button to▲ or ▼ button to button to

select the language, then
press the ENTER button. The

Language

English

Español
Português
Français

Plug & Play

message “Check antenna

input” is displayed.

If any language is not

➢

selected, the language
menu will disappear
about 30 seconds later.

3 Make sure that the antenna is

connected to the TV.

Enter

Plug & Play

Check antenna input.

Enter

Plug & Play

Auto Program

Skip

OK

Skip

Move

Press the ENTER button,

then the “Auto Program” is

displayed.

4 Press the ENTER button to

select “Start”. The TV will

begin memorizing all of the
available channels. Press the
ENTER button to stop.

Auto Program

Air 3
7 %

Start

Enter Skip

Plug & Play

Stop

Enter Skip

5 After all available channels

are stored, the “Clock set” is

displayed. Press the ENTER

button. Press the ◄ or ►

button to move to the hour
or minute. Set the clock by

pressing the ▲ or ▼ button.

6 When you have finished,

Plug & Play

Clock Set 12:00 am

Move
Adjust

Enter
Skip

 Source List

You can switch between
viewing signal from connected

equipment, such as a VCR,

TV

TV

AV1
AV2
Component

DVD, set-top box, and the TV

source (broadcast or cable).

Press the SOURCE

➢

button on the remote

Move Enter Return

control repeatedly to select the desired signal source.

Source List

press the MENU button.

The “Enjoy your watching.”

is displayed and then the
channel which has been
stored will be activated.

Plug & Play feature doesn’t work in the AV mode,

➢

and then the channel which has been stored will be

Enjoy your watching.

OK

activated.

TV

Plug & Play ►

Language : English ►

Re-setting the Plug & Play

Method:
MENU  ▲/▼ (Setup) 
ENTER  ▲/▼ (Plug & Play) 
ENTER

0%

Time ►

Caption : Off

Child Lock ►
Blue Screen : Off ►
Melody : On ►
Music Mode : Off ►

Move Enter Return

Setup

continued...