Samsung 240 User Manual
Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 240, including taking
images, downloading images and using the MGI PhotoSuite III SE software.
Please read this manual before using your new camera.
ENGLISH
2
Instructions
Use this camera in the following order
Set up
the camera driver
Before connecting the USB cable to the PC and this
camera, you have to set up the camera driver.
Install the camera driver that is contained in the
Application S/W CD-ROM. (p.99)
Take a picture
(p.35~57)
Insert the supplied USB cable into the PC USB port and
the camera USB connection terminal. (p.86~88)
Check the camera power. If the power is turned off, slide
the camera switch to power it on.
(p.38)
Open Window’s EXPLORER and search [Removable
Disk].
(p.87)
Take a picture
Insert the
USB cable
Check the camera
power
Check
[Removable Disk]
3
READY
Special features
This digital camera has the following features.
A fine resolution of 2.0 mega pixels
A 3X optical and 2X digital zoom lens
Movie clip recording function
Date imprinting on a still image
Multiple language support
An FCC warning
This device has been tested in accordance with the limits of a class B digital device under item 15
of the FCC rules. These limits are designed to provide protection against harmful interference in
commercial installation. This equipment generates, absorbs and can emit radio frequency energy.
If it is not installed and used in accordance with the instructions, it may cause harmful interference
to radio communication. There is however, no guarantee that interference will not occur in a some
situations. Should any interference occur when this device is in operation, please try one or more of
the following measures.
Change the location and direction of any aerial.
Increase distance between the camera and affected device.
Use a different socket away from the affected device.
Please contact a Samsung agent or a radio/TV engineer.
This device complies with part 15 of the FCC Rules.
4
Contents
Getting to know your camera 6
Safety note 7
This digital camera can be used for 10
Manufacturer s contents 12
Identification of features 13
Product Exterior(Front / Top / Side) 13
Product Exterior (Back) 14
Viewfinder/ AF indicator lamp/
Flash indicator lamp 15
LCD monitor indicator 17
Camera mode definition 19
MOVIE CLIP mode 19
STILL IMAGE mode 19
PLAY mode 19
SETUP mode 19
LCD monitor menu indicator 21
Preparation 27
Connecting to a Power source 27
Using the batteries 27
Battery condition indicator 27
Using the AC power adapter 29
Using the Digimax battery pack
(Optional : SBP-3603) 29
Inserting the memory card 30
Removing the memory card 32
Instructions on how to use
the memory card 32
Recording mode 35
Starting Recording Mode 35
Recording a Movie clip 35
Recording a still image 36
Using the camera button to adjust
the camera 38
POWER switch 38
SHUTTER button 38
LCD button 39
MENU button 40
ZOOM (W/T) button 41
5-function button 42
UP button 43
PAUSE/REPLAY/DOWN button 43
FLASH / LEFT button 43
SELF-TIMER / RIGHT button 46
OK button 47
MACRO button 47
Using the LCD monitor to adjust
the camera 48
IMAGE SIZE 49
IMAGE QUALITY 50
EV COMPENSATION 52
WHITE BALANCE 53
DIGITAL ZOOM 55
QUICK VIEW 56
LCD BRIGHTNESS 57
Play mode 58
Starting Play Mode 58
Playing back a still image 58
Playing back a movie clip 59
PLAY mode functions are listed below
59
Setting up the play back function by using
the camera button 61
Power switch 61
LCD button 61
DELETE button 62
Ready Advanced
5
READY
Contents
MENU button 63
THUMBNAIL / ZOOM W button 64
ZOOM T button 65
5-function button 66
UP button 67
PLAY/STOP/DOWN button 67
LEFT button 67
RIGHT button 68
OK button 68
Setting up the play back function using the
LCD monitor 69
SLIDE SHOW 69
PROTECT 70
DELETE ALL 71
LCD BRIGHTNESS 72
COPY TO CARD 73
DPOF (Digital Print Order Format) 75
SETUP mode 76
Starting the SETUP mode 76
BEEP 76
FORMAT 77
POWER OFF 78
RESET 79
DATE IMPRINT 80
DATE TYPE 81
DATE SETUP 82
VIDEO OUT 83
LANGUAGE 85
PC mode 86
Starting PC mode 86
Important notes 89
Caution! 89
Warning indicator 91
Before contacting a service center 92
Please check the following 92
Specifications 94
Software manual 96
Software Notes 96
About software 97
Setting up the application software 99
Removing the USB Driver for
Windows 98SE 107
Removable Disk 109
Removing the removable disk 110
Windows 98SE 110
Windows 2000/ME/XP 110
Setting up the USB Driver for MAC 112
Using the USB Driver for MAC 112
Digimax Viewer 113
MGI PhotoSuite III SE 114
GET 117
PREPARE 121
COMPOSE 122
ORGANIZE 123
SHARE 127
PRINT 128
FAQ 129
SoftwareAdvanced
6
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
Keep the manual in a safe place.
About the symbols
This manual contains instructions on using this camera that will help you to use this camera safely and
correctly.
This will help prevent danger and injury to others.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, may result in a
minor or moderate injury.
NOTICE
NOTICE indicates a factor, which, if not avoided, may result in camera malfunction or poor
image quality.
INFORMATION
INFORMATION indicates a factor, which should assist further in the operation of the
camera.
7
READY
Safety note
DANGER
Do not attempt to modify this camera in any
way. This may result in fire, injury, electric
shock or severe damage to you or your
camera. Internal inspection, maintenance and
repairs should be carried out by your dealer or
Samsung Camera Service Center.
Please do not use this product in close
proximity to flammable or explosive gases, as
this could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera,
and then disconnect the power source (batteries or AC Power Adapter). You must contact your
dealer or Samsung Camera Service Center. Do not continue to use the camera as this may cause a
fire or electric shock.
Do not insert or drop metallic or inflammable
foreign objects into the camera through access
points e.g. Memory card slot and battery
chamber. This may cause a fire or electric
shock.
Do not operate this camera with wet hands.
This could pose a risk of electric shock.
8
Safety note
WARNING
Do not use the flash in close proximity to
people or animals. Positioning the flash too
close to your subject’s eyes, may cause
eyesight damage.
When taking photographs, never point the lens
of the camera directly into very strong light.
This may result in permanent damage to the
camera or your eyesight.
Do not leave this camera in places subject to
extremely high temperatures, such as a
sealed vehicle, direct sunlight or other places
of extreme variances in temperature.
Exposure to extreme temperatures may
adversely affect the camera’s internal
components and could cause a fire.
When in use, do not cover the camera or AC
Power Adapter. This may cause heat to build
up and distort the camera body or cause a fire.
Always use the camera and its accessories in
a well-ventilated area.
For safety reasons keep this product and accessories out of reach of children or animals to prevent
accidents e.g.:
Swallowing batteries or small camera accessories. In case of accidents, please consult a doctor
immediately.
There is a risk of permanent eye damage if the flash is operated at a distance of less than one
meter from a person’s eyes.
There is a possibility of injury from the camera’s moving parts.
9
READY
Safety note
CAUTION
Leaking, overheating, or burst batteries could result in fire or injury.
Use batteries with the correct specification for the camera.
Do not short circuit, heat or dispose of batteries in fire.
Do not use old batteries with new ones, or mix brands of batteries.
Ensure the batteries are positioned correctly with regard to polarity (+ / -).
When the camera is not in use for long periods, always unplug the camera from its power source.
Do not fire the flash while it is in contact with hands or any objects. Do not touch the flash after using
it continuously. It may cause burns.
Do not move the camera while it is switched on, if you
are using the AC Power Adapter. After use, always
switch off the camera before unplugging the adapter
from the AC Power wall socket. Then make sure that
any connector cords or cables to other devices are
disconnected before moving the camera. Failure to do
so may damage the cords or cables and cause a fire or
electric shock.
10
This digital camera can be used for
Viewing images on TV
(refer to page 83)
Printing images using a dedicated
printer, DPOF-compatible printer
or DPOF-equipped photo lab.
(refer to page 75)
Editing images on a PC
(refer to page 114 ~ 128)
Taking a picture.
(refer to page 35 ~ 57)
Downloading image files from
camera to computer.
(refer to page 86 ~ 88)
11
READY
This digital camera can be used for
Inserting images
directly into any
electronic document
Taking a self-portrait and
using the image to
personalize name cards
You can even create your
own unique gift-wrap paper
by using your digital images
Creation of a
digital photo
album
12
Manufacturer’s contents
Please check that you have the correct contents before using this product.
marked contents are optional.
Digital camera
2 AA Alkaline
Batteries
Video cablePouch
USB cable
Applications S/W-
Driver CD-ROM
Product warranty
Camera strap User manual
SD memory card
AC Adapter
(3.3V)
Battery pack
(SBP-3603)
Battery charger
Battery charger
2 AA
Ni-MH
Batteries
AC adapter(3.3V)
Rechargeable
battery
AC adapter(5V)
Digimax Battery I-Pack : SBP-1103 KIT
SAMSUNG Ni-MH Battery Pack : SNB-2012 KIT
Warning
Do not insert the Digimax Battery I-Pack
(SBP-1103 Kit) AC adapter plug (5V,
optional) to the DC input connection
point as this results in electric shock or
severe damage to your camera. Please
ensure that you use an AC adapter
(3.3V, optional) with the correct
specification for the camera.
13
READY
Identification of features
Product Exterior(Front / Top / Side)
Shutter button
Mode dial lamp
Self-timer lamp
Power switch
Flash
Lens
DC input connection
point
Mode dial
Viewfinder
Video connection
terminal
Memory card slot
USB connection
terminal
Battery chamber
cover/
Memory card cover
Battery chamber
14
Identification of features
Product Exterior (Back)
5-function button
LCD monitor
Tripod socket
Zoom(T) / Digital
zoom button(p.41)
MENU button
(p.40)
Zoom(W) / Thumbnail
button(p.41)
Autofocus indicator
(Green) lamp
LCD button
(p.39)
MACRO/ DELETE
button(p.62)
Strap eyelet
Viewfinder
FLASH/ LEFT( ) button (p.43)
OK button (p.47)
PLAY/STOP/ DOWN( ) button (p.43)
5-function button
SELF-TIMER/ RIGHT( ) button
(p.46)
UP( ) button (p.43)
Flash indicator(Red)
lamp
15
READY
Identification of features
Viewfinder/ AF indicator lamp/ Flash indicator lamp
Optimum picture area over 1.5m
Autofocus indicator lamp(Green)
Camera status lamp
lamp Status Camera status
AF/Flash lamp Off System ready
When the autofocus can t activate
(when the shutter button is pressed half way down)
In dark conditions
Image processing(compression/decompression)
USB busy(PC mode)
The focus is adjusted.
(when the shutter button is pressed half way down)
Power on processing
Blinking (Red) The flash is being charged
The flash is ready for firing
(when the shutter button is pressed half way down)
Power on processing
Flash indicator lamp(Red)
Illuminating
(Red)
Illuminating
(Green)
Blinking
(Green)
AF indicator lamp
Flash lamp
16
Identification of features
INFORMATION
Self-timer lamp
Color Status Camera condition
For the first seven seconds, the LED blinks slowly.
For the final three seconds, the LED blinks quickly.
Blinking once When the shutter button is released after being pressed.
Red
Mode dial lamp
Color Status Camera condition
When the camera power is turned on/off.
/ When the shutter button is released after being pressed.
Blinking twice Rotating the mode dial(changing the camera working mode)
When the LCD monitor is turned off (by pressing the LCD button)
The camera buttons are not operated for over 60sec.
The camera is in PC mode.
Green
Beep
Beep sound Time Camera condition
When the camera power is turned on/off.
Normal beep Once Rotating the mode dial/ pressing the shutter button/
Pressing the camera buttons
Error beep 3 times When an error occurs
Self-timer beep Once A beep will sound when the self-timer lamp blinks
- To hear the beep sound, you have to set the beep sound to "ON" in the setup mode menu.
Blinking once
Illuminating
Blinking
17
READY
Identification of features
LCD monitor indicator
No. Description Icons Page
1 Recording mode p.35/36
2 Battery p.27
3 Camera shake warning p.37/44
4 Flash p.44
5 Macro indicator p.47
6 Self-timer p.46
7 White balance p.54
8 Exposure compensation +0.5 EV (Exposure Value) p.52
9 Digital zoom( Large image size) p.55
Number of available shots remaining(still image)
0015
Recording time (movie clip) 00:20
11 Image size p.49
The LCD monitor displays information about the shooting conditions.
Recording mode
10
Image & Full Status
18
Identification of features
Play mode
No. Description Icons Page
12 Quality p.50
13 Memory card indicator p.30
14 Time 13:00
15 Date 2003/01/10
No. Description Icons Page
1 Battery p.27
2 Protect indicator p.70
3 DPOF indicator p.74
4 Digital zoom indicator p.55
5
Digital zoom magnification rate indicator
p.65
6 Number of stored images 100-0005
7 Memory card indicator p.30
8 Movie clip indicator p.35
Still image & Full Status Movie clip & Full Status
19
READY
Identification of features
Camera mode definition
You can select the desired working mode by using the mode dial located on the top of the camera. This
digital camera has 4 working modes. These are listed below
MOVIE CLIP mode ( )
This mode is used for movie clips.
The flash is changed to FLASH OFF when this mode is selected.
STILL IMAGE mode ( )
This mode is used for still image shots
Normal : 0.8m ~ infinity
Macro : Wide - 0.1m ~ 0.8m
Tele - 0.4m ~ 0.8m
PLAY mode ( )
In this mode, the stored images on the memory can be viewed on the LCD monitor on the back of
the camera or on an external monitor using a video output terminal.
SETUP mode ( )
In this mode, you can set up basic settings such as BEEP, FORMAT, POWER OFF, RESET,
DATE/TIME, VIDEO OUT, LANGUAGE.
Mode dial
INFORMATION
PC mode
Your computer will recognize the camera as a Removable Disk when connected by the USB
cable. You can transfer images between the computer and the camera. You have to install
the camera driver before connecting the USB cable. The camera working mode will be
changed to PC mode by connecting the USB cable.
20
Identification of features
Selecting camera mode and menu
You can select a camera mode or a camera mode menu by pressing the MODE dial or MENU
button as below.
Power
on
MOVIE CLIP
mode
( )
MOVIE CLIP
mode menu
PLAY MODE
( )
STILL IMAGE
mode menu
STILL IMAGE
mode
( )
PLAY mode
menu
Connecting the USB
cable
PC mode
Pressing the MENU button
Pressing the MENU button
Pressing the MENU button
Rotating the Mode dial
Rotating the Mode dial
Rotating the Mode dial
SETUP mode
( )
21
READY
Identification of features
LCD monitor menu indicator
Camera mode
MOVIE CLIP ( )
WHITE
BALANCE
AUTO*
DAYLIGHT
CLOUDY
SUNSET
TUNGSTEN
FLUORESCENT
LCD BRIGHTNESS -5~0*~+5
Main menu Sub menu
Each mode has a menu as shown below. * marked sub menu is the default setting.
(p.53)
(p.57)
22
Identification of features
STILL IMAGE 1/2 ( )
EXPOSURE
QUALITY
IMAGE SIZE 1600x1200* (p.49)
800x600
SUPER FINE (p.50)
FINE*
NORMAL
-2.0 ~ 0.0* ~ +2.0EV (0.5 EV steps) (p.52)
WHITE BALANCE AUTO*
DAYLIGHT
CLOUDY
SUNSET
TUNGSTEN
FLUORESCENT
(p.54)
Camera mode Main menu Sub menu
23
READY
Identification of features
STILL IMAGE 2/2 ( )
LCD BRIGHTNESS -5~0*~+5
QUICK VIEW OFF
ON*
(p.56)
(p.57)
Camera mode Main menu Sub menu
PLAY 1/2 ( )
SLIDE SHOW 1,3*,5,7,9 SEC
DELETE ALL NO*
YES
(p.69)
PROTECT ONE IMAGE* UNLOCK*
LOCK
(p.70)
(p.70)
ALL IMAGES UNLOCK*
LOCK
(p.70)
(p.70)
(p.71)
LCD BRIGHTNESS -5~0*~+5 (p.72)
24
SETUP 1/3 ( )
RESET NO*
YES
BEEP ON*
OFF
(p.76)
FORMAT NO*
YES
(p.77)
POWER OFF 3MIN*/5MIN/10MIN/30MIN/CANCEL
(p.78)
(p.79)
Identification of features
DPOF
COPY TO CARD NO*
YES
# OF PRINTS 0~9
(p.73)
(p.75)
PLAY 2/2 ( )
Camera mode Main menu Sub menu
25
READY
Identification of features
SETUP 2/3 ( )
VIDEO OUT NTSC
PAL
DATE IMPRINT ON *
OFF
(p.80)
DATE TYPE Y/M/D*
D/M/Y
M/D/Y
(p.81)
DATE SETUP 2000/01/01~2058/12/31
(p.82)
(p.83)
Camera mode Main menu Sub menu
26
Identification of features
SETUP 3/3 ( )
LANGUAGE ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
(p.85)
INFORMATION
There is no associated menu in PC mode and the LCD monitor is always turned off in PC
mode.
Camera mode Main menu Sub menu
27
READY
Preparation
Connecting to a Power source
There are two ways in which to provide the camera with power. You can use batteries(AA Alkaline, NiMH, CR-V3), or alternatively, you can use an AC(100V ~ 250V) Adapter (DC 3.3V 2.0A).
Battery condition indicator
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Using the batteries
1. Open the battery chamber cover by pushing in the direction of the
arrow.
2. Insert the batteries taking note of the polarity (+ / -).
3. To close the battery chamber cover, push it until it clicks.
: The batteries are fully charged.
: Prepare new batteries.
: There is no battery capacity. Replace with new batteries.
28
Preparation
INFORMATION
The date & time setting menu will be displayed on the LCD monitor in the following
circumstances:
Check the date & time. If the date & time are incorrect, change them before taking a picture.
When the camera is used for the first time.
Even if the batteries or AC adapter are removed, it is necessary to reset the time /date.
This camera will automatically switch off when not in use for a period of time.
Refer to [POWER OFF] function(p.78).
NOTICE
Important information about battery usage
Please remove the batteries if the camera will not be used for long periods. Batteries can
lose power over time and are prone to leaking if kept inside the camera.
We recommend high capacity ALKALINE batteries as manganese batteries cannot deliver
sufficient power.
Low temperatures (below O°C) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will usually recover at normal temperatures.
Do not use old and new batteries at the same time.
During extended use of the camera, the camera body may become warm. This is perfectly
normal. If you are planning to use this camera for long periods of time, it is advisable to use
an AC adapter.
29
READY
Preparation
Using the AC power adapter
If you have access to a mains supply, using an AC Adapter
allows the camera to be used for long periods of time. If you
connect the camera to a computer, it is advisable to use an AC
adapter, as this will enable extended use.
Plug the adapter into the connection point (DC IN 3.3V) on the
camera.
DANGER
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera nor
adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter with the correct specification for the camera (3.3v
2.0A). Failure to do so may affect your warranty.
Using the Digimax battery pack (Optional : SBP-3603)
The Digimax Battery Pack is a rechargeable external Li-ion
battery for use with most digital cameras.
These optional battery packs provide long lasting power and their operating performances are much
improved over Ni-MH and Alkaline batteries. This is due to the mass storage lithium ion cell.
Contact your local dealer or the nearest authorized Samsung camera service center to buy the optional
battery packs.
30
Preparation
Inserting the memory card
The camera comes with 8MB of internal flash memory, allowing you to store images and movie clips in
the camera. However, you can expand the memory capacity by using an optional memory card so that
you can store more images and movie clips.
1. Turn off the camera power and pull the memory card cover in the
direction of the arrow to open.
2. Insert the memory card all the way into the memory card slot. The
Label stuck to the memory card and the front side of the camera
should face in the same direction. The memory card pins and the
LCD monitor should face in the same direction. The memory card
will then be fitted.
3. To close, push the memory card cover against the arrow until you
hear a click.
Once the CARD is inserted, the memory card indicator will
appear on the LCD monitor.
If the CARD does not fit, check that it is inserted correctly.
Do not force the memory card.
Loading...