SE60x Earset Microphone
Unidirectional Earset Microphone with Miniature Condenser Capsule
Owner’s Manual
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway may return their
used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a correct method of
disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human health.
Copyright 2019, Samson Technologies Corp.
v1
278-B Duffy Ave
Hicksville, New York 11801
Phone: 1-800-3-SAMSON (1-800-372-6766)
www.samsontech.com
Other trademarks and trade names are those of their respective owners.
2
Introduction
Congratulations on your purchase of the Samson SE60x Earset Microphone. The SE60x is a low
profile, miniature condenser Earset microphone with a 7.35mm flat capsule. With its unidirectional
pickup pattern, the SE60x provides superb isolation, resulting in more gain before feedback with
clear and articulate sound in live sound applications. The microphone has been specially treated
with a water resistant coating providing extra protection from sweat and other moisture. In addition,
there is a moisture guard drip-ring to further protect the capsule and ensure reliable performance.
The SE60x Earset Microphone is well-suited for use with Samson wireless systems, and with four
included adapter cables, the microphone can be used with most popular wireless systems. Other
accessories included in the kit are a clothing collar clip, four windscreens and a carry case that
holds the SE60x and all the accessories.
In the box, you’ll find a registration card enclosed, don’t forget to follow the instructions so that you
can receive online technical support and so we can send you updated information about this and
other Samson products in the future. We recommend you keep the following records for reference,
as well as a copy of your sales receipt.
Serial number: __________________________ Date of purchase: ___________________________
If you have any questions or comments regarding the SE60x Earset Microphone or any other
products from Samson, do no hesitate to contact us at support@samsontech.com.
With proper care and maintenance, your SE60x Earset Microphone will operate trouble-free for many
years. Should your SE60x Earset Microphone ever require servicing, a Return Authorization (RA) number
must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted.
Please visit www.samsontech.com/ra for an RA number prior to shipping your unit. Please retain the
original packing materials and, if possible, return the unit in its original carton. If your SE60x Earset
Microphone was purchased outside of the United States, contact your local distributor for warranty details
and service information.
3SE60x Earset Microphone
Connector Cables
The SE60x includes four cables with adapters for some of the most popular wireless microphone
beltpack transmitters.
3.5mm Connector
Works with Sennheiser® wireless systems
®
4-Pin Connector
Hirose
Works with most Audio-Technica® wireless systems
Switchcraft® TA3F Connector
Works with Samson AirLine ATX Series, Concert Series and most AKG® wireless systems
®
Switchcraft
Works with most Shure® wireless systems
To connect the cable to the Earset:
• Choose the right cable and connector that
works with your wireless system.
• Line the cable up to the threaded terminal
on the back of the SE60x and screw the
cable into the Earset. Do not over tighten the
cable.
TA4F Connector
4
Mic Positioning
The SE60x microphone is designed to be worn on the left ear. For optimal placement please follow
the directions below:
Position the SE60x microphone element about
0.25” –1” behind the corner of your mouth.
Since the SE60x is a unidirectional capsule,
the low frequency characteristics will change
depending on the position of the microphone
from the sound source. To avoid breath noise
and p-pops, do not place the microphone
directly in front of your mouth.
If the microphone is too far away from your
mouth you will need to increase the gain and
reduce isolation.
To minimize additional noise, do not locate the
microphone tight against your cheek.
5SE60x Earset Microphone
Specifications
Microphone Element Back electret condenser
Capsule Dimension 7.35mm
Polar Pattern Unidirectional (cardioid)
Frequency Response 50Hz–18kHz
Sensitivity -45dB 1 V/Pa ±3dB at 1kHz
Output Impedance 2kΩ ±30%
Max. SPL 135dB
Operating Voltage 1.5–12V DC
Cables 4x ø1.4mm*1.2m
Additional Features Gold-plated connector, moisture-resistant coating,
IP Enclosure Rating IP65 (dust and water/sweat-resistant)
Included Adapter Cables 1/8” (3.5mm), Hirose® 4-Pin,Switchcraft® TA3F,
Accessories 4x windscreens, collar clip, carry case
Product Weight 0.12oz (3.5g)
stainless steel mesh grille
Switchcraft® TA4F
At Samson, we are continually improving our products, therefore specifications and images are
6
subject to change without notice.
Specifications
45°
0°
-5
-10
-15
-20
-25
dB
45°
90°90°
135°
dB
10
0
-10
-20
20 50 100 200 500
Frequency Response
135°
180°
Polar Pattern
1000 2000 5000 10000 20000 Hz
Frequency in Hz
7SE60x Earset Microphone
Samson Technologies Corp.
278-B Duffy Ave
Hicksville, New York 11801
Phone: 1-800-3-SAMSON (1-800-372-6766)
www.samsontech.com
Loading...