Sammy SUPER SPORTS ARENA User Manual

SUPER
SPORTS ARENA
RE: NJ VERSION EP-ROM (Ver.1.00NJ)
Please exchange the EP-ROM to Ver.1.00NJ. Refer to picture below.
Program EP-ROM is here. 256K, 28pin
Please replace this EP-ROM with Ver. 1.00NJ NEW EP­ROM.
ATTENTION!!! Please match the location of EP-ROM Notch as shown below.
Sound EP-ROM 4M 32pin (No need to replace)
NOTCH
VIEW OF MAIN PCB (PARTS SIDE)
After exchanging the EP-ROM, please do the following to reset the MAIN PCB:
Press and hold the SERVICE CREDIT SWITCH then re-power on the game. Continue to Press and
hold the SERVICE CREDIT SWITCH until attract sound comes on.
By doing the above, you reset the PCB to accept the NEW EP-ROM.
NOTE: You will have to re-set some Settings in the setting mode again.Specifically pertaining to Winability and Lamp speed (See manual setting table.)
1
New feature of Ver.1.00NJ EP-ROM:
When the player has won on an Empty Carousel, the next Carousel automati­cally will pay out the Prize! If All 6 (or 5 or 4) of the Carousels are empty, machine will be "Out of Order." Press "Clear" button or re-power on to clear the "Out of Order" feature and return to normal game mode.
A player can only put in one credit at a time. When you try to put in more credits the coins simply go to the coin return.
Please use following coin mech.
NAME: COIN COMPARITOR
MODEL: CC-16 (12VDC TYPE)
MANUFACTURER: COIN MECHANISMS INC.
CC-16 has 2 wires, Pin 5 (12VDC) and Pin 6 (GND). Please wire as shown next page:
Pin 5 wire on CC-16 connect to CN4-Pin 4 on Main PCB.
Pin 6 wire on CC-16 connect to CN4-Pin 8 on Main PCB.
2
Loading...
+ 4 hidden pages