Sammons Equipment 9047-117-1520 User Manual

Heavy duty tray drying racks

with corrugated shelves for
correctional & institutional use

 Heavy duty aluminum vertical tray drying and storage racks for

correctional & institutional use.

 Corrugated shelves provide the necessary guide tracks for trays.

These racks use heavy wall 1½” x 1¾” aluminum tubular frame and 1⅝”x1⅝”x⅛” extruded aluminum angle uprites
completely welded to form a super strong structure. Heavy wall channel bolsters are welded to bottom frame and furnished
with 6” plate type polyurethane, all swivel casters. Corrugated shelves are welded to horizontal frames except that each
intermediate frame has one removable shelf which lifts off without any tools.

Optional stainless steel construction is also available. Consult factory.

See page D-30B for various models.

3 Section rack for Alladin/Tivoli 3 Section rack for 18”x26” ( & 13”x18”) trays

(13

⅞”x15¼”x2½”) trays Model 9047-117-1826

Model 9047-102-1315

4 Section rack for 10”x14½” trays 6 Section rack for 8

(Shown in optional s/s construction & with 6” casters) (Shown in optional s/s construction & with 6” casters)

Model 9047-576-1014-SS-HD Model 9047-816-0608-SS-HD

7

/16x6⅜”x1⅞” trays

D-30A

Rev. 3/2012

Heavy duty racks with corrugated shelves

Model

Number

9047-264-1013
9047-264-1014
9047-264-1115
9047-264-1418
9047-234-1418
9047-117-1520
9047-117-1622
9047-117-1826

9047-80-1826
9047-102-1315
9047-152-1315

9047-234-1015

9047-160 –1013
9047-160 –1115
9047-272 –1013

9047-272-1115
9047-352-1013
9047-352-1014

9047-40-1220

9047-78-1220
9047-100-1220
9047-120-1220
9047-576-1014
9047-680-0608
9047-816-0608

Tray/Pan

Size

(Inches)

1011/

x 137/8 x 11/8264 1¼ 3 Side 24⅜ 60⅜ 57 154

16

10 x 14½ x 15/

Pan

Capacity

16

Spacing

(Inches)

264 1¼ 3 Side 24⅜ 60⅜ 59⅜ 158

115/8 x 15½ x ¾ 264 1¼ 3 Side 24⅜ 60⅜ 62⅜ 162

14 x 18 264 1¼ 3 Side 29⅛ 60⅜ 703/16179
14 x 18 234 1½ 3 Side 26⅝ 63¾ 703/16168
15 x 20 117 1½ 3 End 26⅝ 63¾ 61½ 160
16 x 22 117 1½ 3 End 26⅝ 63¾ 64½ 163
18 x 26 117 1½ 3 End 26⅝ 63¾ 70 178
18 x 26 80 1½ 2 End 26⅝ 63¾ 54½ 169

137/8 x 15¼ x 2½

(Alladin/Tivoli)

10¾ x 15 x 19/

(Duralux T-200)

1011/

x 137/

16

102 33/
152 3

16

234 1½ 3 Side 24

160 1¼ 4 End 29⅛ 30⅜ 60⅜ 135

8

115/8 x 15½ 160 1¼ 4 End 29⅛ 30⅜ 64⅛ 138

1011/

16

x 137/

272 1¼ 4 End 29⅛ 47⅞ 60⅜ 165

8

115/8 x 15½ 272 1¼ 4 End 29⅛ 47⅞ 64⅛ 168

1011/

x 137/8 x 11/8352 1¼ 4 Side 24⅜ 60⅜ 73 189

16

10 x 14½ x 15/

352 1¼ 4 Side 24⅜ 60⅜ 75½ 192

16

*12 x 20 x 2½ 40 3 2 Side 26⅝ 35½ 56¼ 115
*12 x 20 x 2½ 78 3 2 Side 26⅝ 64½ 56¼ 130
*12 x 20 x 2½ 100 3 3 Side/End 26⅝ 64½ 69⅛ 173
*12 x 20 x 2½ 120 3 3 Side 26⅝ 64½ 78⅛ 175

14 x 10 x 1¼ 576 1½ 4 Side 33 78 74¼ 220
87/16 x 6⅜ x 1⅞ 680 2 5 Side 28⅜ 74⅛ 73 280
87/16 x 6⅜ x 1⅞ 816 2 6 Side 28⅜ 74⅛ 73 295

Pan

Number

of

Sections

16

3

/

16

3 Side 28⅜ 5911/1660⅛ 158
4 Side 28⅜ 661/16773/16189

Type

of

Loading

O.A. Dimensions

(Inches)

D L H

Weight

(Pounds)

⅜ 64½ 603/16145

*Rack will also accommodate 4” or 6” deep steam pans & gastronorm (GN 2/1 & GN 1/1) pans. Capacity will vary.

9047 Series racks are also available with aluminum frame & stainless steel corrugated shelves (add “-SS-CR” after
model number) or in all stainless steel construction (add “-SS-HD” after model number). Consult factory.

Options for tray drying rack: (also see Table DD-1 for other options)

A. Depth over 30⅛(up to 34”max)
B. Extra length (up to 18” more)
C. Extra section
Note: Overall depth/length/height restrictions apply. Consult factory.
D. S/S construction
E. Push handle

F. 6 casters (4 swivel, 2 rigid)
G. Spacing of 2”, 2½”, 3¾” or 4” for corrugations
H. Bottom shelf flat without any corrugations or guides for
storing misc. pots & pans
(will reduce overall capacity of trays being stored)
I. Wrap around bumper or corner bumpers

D-30B

03/12 SAMMONS EQUIPMENT MANUFACTURING CORPORATION All specifications subject to change without notice