Sammons Equipment 2285-HIN-2-ST-0608-192 User Manual

Hot insulated double door
cabinets for smaller
compartment trays for
correctional facilities

 Fully insulated hot s/s cabinets.
 Bottom mounted heating unit with 1600W heating.
 2 different styles offered. (Choice of trays on 3” centers or stacked)
 6” casters, push handle & perimeter bumper are standard.
 Heavy duty reinforced correctional hinges.

These hot cabinets are furnished with 1 ½” fiberglass insulation and are offered in two styles, one
with removable rack with fixed slides spaced on 3” centers and the other with removable flat
square tubing shelves for stacking trays. Cabinets roll easily on 6” casters , 2 with brakes.
The bottom mounted heating unit is easily removable (non-removable optional) & provides
the necessary gentle & forced air circulation with thermostatically controlled temperature.

Outer body, door & top are made of 20 ga. (18 ga. optional) polished stainless steel for strength
& durability. Inners are made of 22 ga s/s. Push handle, perimeter bumper, tamper resistant
fasteners, heavy duty reinforced correctional hinges, latches and dial thermometer are standard.

HE-1600 Heating Unit:

1600 W heating coil, 1,675W total, 13.96 amps at 120 VAC 60 HZ single phase furnished
with 15 amps, 8ft. long cord with 3 prong Nema 5-15 P grounding plug, off-on switch,
75W blower, thermostat and pilot lights. Unit has over 4 quarts capacity water reservoir.
Blower and heating coils are thermally protected. Optional 220-240V available.
Optional HE-2000 heating unit with 2000W heating coil and 20 amps cord and 5-20P
plug for *20 amps service is also available. Consult factory. STYLE “A”
*For Canadian application HE-2000 and HE-1600 are furnished with 30 amps/20amps (shown with optional left section ambient)

cord and plug respectively.

STYLE “A”: Slides are spaced on 3”centers (Double sets of rack in each section)

Model

Number

2285-HIN-4-910-112

2285-HIN-4-910-96

2285-HIN-4-910-80
2285-HIN-4-0608-168
2285-HIN-4-0608-144
2285-HIN-4-0608-120

Tray
Size

(Inches)

9 x 10½ x 2½ 3 112 31½ x 58¾ x 64⅝ 590
9 x 10½ x 2½ 3 96 31½ x 58¾ x 58⅝ 565
9 x 10½ x 2½ 3 80 31½ x 58¾ x 52⅝ 530

6⅜x8½x2⅛ 3 168 31½ x 57¼ x 64⅝ 570
6⅜x8½x2⅛ 3 144 31½ x 57¼ x 58⅝ 536
6⅜x8½x2⅛ 3 120 31½ x 57¼ x 52⅝ 510

Tray

Spacing

(Inches)

Tray

Capacity

O.A. Dimensions

(Inches)

D x W x H

Weight

(Pounds)

STYLE “B”: Trays are to be stacked. Cabinet furnished without slides,

but supplied with removable tubular shelves for stacking trays.

Model

Number

2285-HIN-2-ST-910-112

2285-HIN-2-ST-910-96

2285-HIN-2-ST-910-80
2285-HIN-2-ST-0608-192
2285-HIN-2-ST-0608-168
2285-HIN-2-ST-0608-144

NOTE 1: These cabinets are also available without the heating unit and for other size trays. Consult factory. STYLE “B”
NOTE 2: These cabinets are also available with left section non-heated (Ambient) and right section heated. 2285-HIN-2-ST-910-112

Consult factory and see Options below. (with optional vertical separators)
NOTE 3: Style “B” cabinets are also available with vertical separators as shown on the picture on right hand
side. See Options below. Aluminum construction is also available.
NOTE 4: Sample tray is required with order for proper sizing.

ADDITIONAL OPTIONS FOR CORRECTIONAL FACILITIES

1. Non-removable heating unit (in lieu of removable) 6. Left section ambient

2. Heavy duty side/top mounted security lockable latch 7. Both sections ambient (non heated).

3. 18 ga. s/s exterior Cabinet furnished without heating unit.

4. Extra set of hinges (3 sets in lieu of 2) for each door

5. 6” balloon casters (in lieu of std 6”) 9. Vertical separators for STYLE “B”

Tray
Size

(Inches)

9 x 10½ x 2½ Stacked 112 31½ x 58¾ x 64⅝ 510
9 x 10½ x 2½ Stacked 96 31½ x 58¾ x 58⅝ 486
9 x 10½ x 2½ Stacked 80 31½ x 58¾ x 52⅝ 440

6⅜x8½x2⅛ Stacked 192 31½ x 57¼ x 64⅝ 500
6⅜x8½x2⅛ Stacked 168 31½ x 57¼ x 58⅝ 470
6⅜x8½x2⅛ Stacked 144 31½ x 57¼ x 52⅝ 432

Tray
Spacing
(Inches)

Tray

Capacity

O.A. Dimensions

(Inches)

D x W x H

8. 8” polyurethane or 8” balloon casters

Weight

(Pounds)

C-27