Sammons Equipment 2202-D-1514 User Manual
patient tray delivery carts
Double section stainless steel
Stainless steel patient tray delivery carts.
Double section, non-insulated, easy to maneuver.
Choice of single end loading or double side
loading for 15”x20” trays.
These carts provide exceptional value and are extremely well built
to provide years of service. Slides are fixed formed panels and
require little or no maintenance. These carts use combination of
14 & 16 gauge s/s deck & uprites and 18 ga. s/s formed slides, top,
back & doors. S/S hinges provide 270
handle, 5” polyurethane casters and wrap around bumper are standard.
door swing. One push
One Tray / Pair Slides (Single End Loaded) (See Note 1)
Type
Stainless Steel 2202-D-1512
Stainless Steel 2202-D-1514
Stainless Steel 2202-D-1516
Stainless Steel 2202-D-1518
Stainless Steel 2202-D-1520
Model
Number
Tray
Size
(Inches)
15x20 5¼ 12 40 25 40⅝ 288
15x20 5¼ 14 40 25 45 ⅞ 312
15x20 5¼ 16 40 25 51⅛ 340
15x20 5¼ 18 40 25 56⅜ 358
15x20 5¼ 20 40 25 61⅝ 376
Tray
Spacing
(Inches)
Tray
Capacity
O.A. Dimensions
(Inches)
W D H
Weight
(Pounds)
Two Trays / Pair of Slides (Double Side Loaded) (See Note 2)
Type
Stainless Steel 2202-D-2-1524
Stainless Steel 2202-D-2-1528
Stainless Steel 2202-D-2-1532
Stainless Steel 2202-D-2-1536
Note 1: Single end loading type carts are only for 15”x20” trays.
Note 2: These double side loaded (2202-F-2 Series) s/s carts use step angle slides which will accommodate
both 15”x20” & 14”x18” trays.
Cabinets for other tray sizes & with different slide spacings are also available. Consult factory.
Note 3:
Note 4: O.A. height will increase by 1 ¼” if ordered with optional 6” balloon casters, and an
additional 1 ½” to 3½” if ordered with optional top rail.
Model
Number
(see note 2)
Tray
Size
(Inches)
15x20 5¼ 24 49⅜ 35 ⅛ 40⅝ 348
15x20 5¼ 28 49⅜ 35 ⅛ 45 ⅞ 376
15x20 5¼ 32 49⅜ 35 ⅛ 51⅛ 396
15x20 5¼ 36 49⅜ 35 ⅛ 56⅜ 420
Tray
Spacing
(Inches)
Tray
Capacity
O.A. Dimensions
(Inches)
W D H
Weight
(Pounds)
Options:
A. Vent holes on sides G. 6” Balloon casters
B. Vent holes on back H. 3 or 4 sided top rail (angle or tubular type)
C. Swing door catch I. Drain hole
D. Push handle J. Pass thru’ doors (add “-PT” after model number)
E. 5” cushion rubber casters K. Wheel brakes
F. 6” Poly casters L. Lockable latch
2202-D-1516
(Single end loaded)
Note: Cabinets for trays other than 15”x20” are also available. Optional vinyl is also available. Refer to
catalog page B-21 for other carts for various tray sizes & spacings.
B-33
Double section aluminum
patient tray delivery carts
All aluminum patient tray delivery carts.
Double section, non-insulated, easy to maneuver.
Choice of single end loading or double side
loading for 15”x20” trays.
These carts provide exceptional value and are extremely well built
to provide years of service. Slides are fixed extruded side panels and
require little or no maintenance. These carts use 0.125” thick
aluminum deck & uprites with, top, back & door ranging in thickness
from 0.063” thru’ 0.080”. S/S hinges provide 270
push handle, 5” polyurethane casters and wrap around bumper are standard.
door swing. One
One Tray / Pair Slides (Single End Loaded)
Type
Aluminum 9202-D-1512
Aluminum 9202-D-1514
Aluminum 9202-D-1516
Aluminum 9202-D-1518
Aluminum 9202-D-1520
Model
Number
Tray
Spacing
Size
(Inches)
15x20 51/
15x20 51/
15x20 51/
15x20 51/
15x20 51/
(Inches)
Tray
Tray
Capacity
12 40⅛ 25 39¾ 186
16
14 40⅛ 25 44 ⅞ 196
16
16 40⅛ 25 49 ⅞ 212
16
18 40⅛ 25 55 236
16
20 40⅛ 25 60 266
16
O.A. Dimensions
(Inches)
W D H
Weight
(Pounds)
Two Trays / Pair of Slides (Double Side Loaded)
Type
Aluminum 9202-D-2-1524
Aluminum 9202-D-2-1528
Aluminum 9202-D-2-1532
Aluminum 9202-D-2-1536
Aluminum 9202-D-2-1540
Note 1: Cabinets for other tray sizes & with different slide spacings are also available. Consult factory.
Note 2: Add 2” to O.A. width & depth if ordered with optional corner or wrap around bumper.
O.A. height will increase by 1 ¼” if ordered with optional 6” balloon casters, and an
additional 1 ½” to 3½” if ordered with optional top rail.
Model
Number
Tray
Size
(Inches)
15x20 51/
15x20 51/
15x20 51/
15x20 51/
15x20 51/
Tray
Spacing
(Inches)
16
16
16
16
16
Tray
Capacity
24 49⅜ 35 ⅛ 39¾ 244
28 49⅜ 35 ⅛ 44 ⅞ 258
32 49⅜ 35 ⅛ 49 ⅞ 283
36 49⅜ 35 ⅛ 55 300
40 49⅜ 35 ⅛ 60 322
Options:
A. Vent holes on sides G. 6” Balloon casters
B. Vent holes on back H. 3 or 4 sided top rail (angle or tubular type)
C. Swing door catch I. Drain hole
D. Push handle J. Pass thru’ doors (add “-PT” after model number)
E. 5” cushion rubber casters K. Wheel brakes
F. 6” Poly casters L. Lockable latch
O.A. Dimensions
(Inches)
W D H
Weight
(Pounds)
9202-D-2-1532
Double side loaded
(Shown with optional vent holes on sides)
Note: Cabinets for trays other than 15”x20” are also available. Optional vinyl is also available. Refer to
catalog page B-21 or other carts for various tray sizes & spacings.
B-34
Loading...