Pub. Date 2015.07.24
User Manual
Rev. Date 2016.03.03
Rev. No 0.1
USER MANUAL
Product
Model Name
Manufacture
Ver.
Luminaire Control Wireless Module
BTLEM4
SAMJIN LND Co.,Ltd
V0.1
Document No. Model Name
BTLEM4
Page
페이지 1 / 8
User Manual
1. Specification
Item Contents
Model Name BTLEM4
Modulation GFSK
Frequency Bandwidth 2.402GHz ~ 2.480GHz
Number of Channel 40 channels
Receiver Sensitivity -92.5dBm
RF Sensing Radius 25 m
Enclosure None
Operating Voltage d.c. 5 V ± 5%
Temperature Environment
Operating Humidity (%) 10 (min) ~ 90 (max)
Operating : -30 ~ 85 ℃
Storage: -30 ~ 85 ℃
Pub. Date 2015.07.24
Rev. Date 2016.03.03
Rev. No 0.1
Size/Weight 60 x 17x 6.2 mm/5 g
Document No. Model Name
BTLEM4
Page
페이지 2 / 8
Pub. Date 2015.07.24
User Manual
Rev. Date 2016.03.03
Rev. No 0.1
2. Operation
1) A device which is connected to an SMPS and modulates color temperature and
brightness of luminaires by receiving the signal from Smart-phone or Tablet
App.
3. Installation
1) Located inside the luminaire, and connects the SMPS for integrated
installation.
No Description Detail(Function)
1 BTLEM4 BTLEM4 Board Construct
2 SMPS SMPS to BTLEM4 Connect
Document No. Model Name
BTLEM4
Page
페이지 3 / 8
3. Application Guide
User Manual
Pub. Date 2015.07.24
Rev. Date 2016.03.03
Rev. No 0.1
3.1 Setting Password
Document No. Model Name
BTLEM4
Page
페이지 4 / 8
3.2 Adding New Lights
User Manual
Pub. Date 2015.07.24
Rev. Date 2016.03.03
Rev. No 0.1
3.3 Manage Lights
Document No. Model Name
BTLEM4
Page
페이지 5 / 8
3.4 Light Control Screen
User Manual
Pub. Date 2015.07.24
Rev. Date 2016.03.03
Rev. No 0.1
3.5 Turning Lights On/Off
Document No. Model Name
BTLEM4
Page
페이지 6 / 8
Pub. Date 2015.07.24
User Manual
FCC Statement
Rev. Date 2016.03.03
Rev. No 0.1
NOTICE;
1. The RF module limited to OEM installation ONLY.
The OEM integrator is responsible for the compliance to all the rules that apply to the
product into which this certified RF module is integrated.
2. This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
3. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
FCC Class B
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution (Part 15.21)
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator & your body.
The module in limited to installation in mobile or fixed applications according to Part
2.11091(b).
Document No. Model Name
BTLEM4
Page
페이지 7 / 8
Pub. Date 2015.07.24
User Manual
Rev. Date 2016.03.03
Rev. No 0.1
The module is not possible to apply for portable products.
This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and
users, and The transmitter module may not be co-located with any other transmitter or
antenna. As long as 2 conditions above are met, further transmitter test will not be
required. However, the OEM integrator is still responsible for testing their end-product
for any additional compliance requirements required with this module installed.
IMPORTANT NOTE:
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no
longer considered valid and the FCC ID cannot be used on the final product. In these
circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following:
“Contains FCC ID: TSW-BTLEM4”.
The grantee's FCC ID can be used only when all FCC complian
ce requirements are
met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user's manual of the end
product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in
this manual.
Antenna List
No. Model Type Gain[dbi] Impedance
1 NP-PA-BTLEM Pattern Antenna 1.0 50
Document No. Model Name
BTLEM4
Page
페이지 8 / 8
Loading...