SAMES KREMLIN FPRO LOCK P LP, FPRO P LP, FPRO LOCK P CONV, FPRO P CONV Translation From Original Manual

DOCUMENTATION

AIRSPRAY GUN

FPro P

Manual : 582.097.110-UK - 1711

Date: 23/11/17

Supersede : 06/11/17

Modif.:

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start -up, please read and clearly understand all the documents relating to
this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIG HT TO MAKE CHANGES WIT HO UT PRIOR NOTICE..

SAMES KREMLIN SAS

l

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

578.126.130 1711

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

Pour une utilisation sure, Il est de votre responsabilité
de :

 Lire attentivement tous les documents contenus
dans le CD joint avant la mise en service de
l’équipement,
 D’installer, d’utiliser, d’entretenir et de réparer
l’équipement conformément aux préconisations de
SAMES KREMLIN ainsi qu’aux réglementations
nationales et/ou locales,
 Vous assurez que les utilisateurs de cet équipement
ont été formés, ont parfaitement compris les règles de
sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your
responsibilityto:

 Carefully read all documents contained on the
enclosed CD before putting the machinery into service,
 Install, use, maintain and repair the machinery in
accordance with SAMES KREMLIN's recommendations
and national and/or local regulations,
 Make sure that the users of the machinery have
received proper training and that they have perfectly
understood the safety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

 alle in der CD enthaltenen Dokumente vor der
Inbetriebnahme der Anlage aufmerksam lesen,
 die Anlage im Einklang mit den Empfehlungen von
SAMES KREMLIN sowie mit den nationalen und/oder
lokalen Bestimmungen installieren, verwenden,
warten und reparieren,
 sich vergewissern, dass die Nutzer dieser Anlage
angemessen geschult wurden, die
Sicherheitsbestimmungen verstanden haben und sie
anwenden.

ES IT PT

FR UK DE

Para una utilización segura, será de su
responsabilidad:

 leer atentamente todos los documentos que se
incluyen en el CD adjunto antes de la puesta en servicio
del equipo,
 instalar, utilizar, efectuar el mantenimiento y reparar
el equipo con arreglo a las recomendaciones de
SAMES KREMLIN y a la normativa nacional y/o local,
 cerciorarse de que los usuarios de este equipo han
recibido la formación necesaria, han entendido
perfectamente las normas de seguridad y las aplican.

Per un uso sicuro, vi invitiamo a:

 leggere attentamente tutta la documentazione
contenuta nel CD allegato prima della messa in
funzione dell'apparecchio,
 installare, utilizzare, mantenere e riparare
l'apparecchio rispettando le raccomandazioni di SAMES
KREMLIN, nonché le normative nazionali e/o locali,
 accertarvi che gli utilizzatori dell'apparecchio
abbiano ricevuto adeguata formazione, abbiano
perfettamente compreso le regole di sicurezza e le
applichino.

Para uma utilização segura, é da sua
responsabilidade:

 Ler atentamente todos os documentos incluídos no
CD em anexo antes de pör o equipamento em
funcionamento,
 Proceder à instalação, utilização, manutenção e
reparação do equipamento de acordo com as
preconizações de SAMES KREMLIN, bem como com
outros regulamentos nacionais e/ou locais aplicáveis,
 Assegurar-se que os utilizadores do equipamento
foram devidamente capacitados, compreenderam
perfeitamente e aplicam as devidas regras de
segurança.

NL SE FI

Voor een veilig gebruik dient u:

 alle document op de bijgevoegde cd aandachtig te
lezen alvorens het apparaat in werking te stellen,
 het apparaat te installeren, gebruiken, onderhouden
en repareren volgens de door SAMES KREMLIN
gegeven aanbevelingen en overeenkomstig de
nationale en/of plaatselijke reglementeringen,
 zeker te stellen dat de gebruikers van dit apparaat
zijn opgeleid, de veiligheidsregels perfect hebben
begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar ni
för följande:

 Läs noga samtliga dokument som finns på den
medföljande cd-skivan innan utrustningen tas i drift.
 Installera, använd, underhåll och reparera
utrustningen enligt anvisningarna från SAMES
KREMLIN och enligt nationella och/eller lokala
bestämmelser.
 Försäkra er om att användare av denna utrustning
erhållit utbildning, till fullo förstått säkerhetsföreskrifterna
och tillämpar dem.

Käytön turvallisuuden varmistamiseksi
velvollisuutesi on:

 Lukea huolella kaikki CD:llä olevat asiakirjat ennen
laitteiston käyttöönottoa,
 Noudattaa laitteiston asennuksessa, käytössä,
kunnossapidossa ja huollossa SAMES KREMLIN in
suosituksia sekä kansallisia ja/tai paikallisia
määräyksiä,
 Varmistaa, että laitteiston käyttäjät ovat koulutettuja
ja ymmärtävät täysin turvallisuusmääräykset ja miten
niitä sovelletaan.

PL CS SL

Dla zapewnienia bezpiecznego użytkowania na
użytkowniku spoczywa obowiązek:

 Uważnego zapoznania się ze wszystkimi
dokumentami znajdującymi się na załączonej płycie CD
przed pierwszym uruchomieniem urządzenia,
 Instalowania, użytkowania, konserwacji i naprawy
urządzenia zgodnie z zaleceniami firmy SAMES

KREMLIN oraz z przepisami miejscowymi,

 Upewnienia, że wszyscy przeszkoleni użytkownicy
urządzenia zrozumieli zasady bezpieczeństwa i stosują
się do nich.

Pro bezpečné používání jste povinni:

 Před uvedením zařízení do provozu si pozorně
přečíst veškeré dokumenty obsažené na přiloženém

CD,
 Nainstalovat, používat, udržovat a opravovat

zařízení v souladu s pokyny firmy SAMES KREMLIN
a s národními a/nebo místními legislativními předpisy,
 Ujistit se, že uživatelé tohoto zařízení byli vyškoleni,
že dokonale pochopili bezpečnostní pravidla a že je

dodržují.

Za varno uporabo ste dolžni:

 natančno prebrati vse dokumente na CD pred

zagonom stroja,
 inštalirati, uporabljati, vzdrževati in popravljati

opremo po določilih SAMES KREMLIN in v skladu z

veljavnimi nacionalnimi in/ali lokalnimi predpisi,
 poskrbeti, da so uporabniki te opreme ustrezno
usposobljeni, poznajo varnostne predpise in da jih
upoštevajo.

SK HU RO

V záujme bezpečného je vašou povinnosťou:

 pozorne si prečítať všetky dokumenty obsiahnuté na

priloženom CD predtým, ako zariadenie uvediete do
prevádzky,

 nainštalovať, používať, udržiavať a opravovať
zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestnymi
predpismi,

 uistiť sa, že používatelia tohto zariadenia boli
zaškolení, riadne porozumeli pravidlám bezpečnosti a

používajú ich.

Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage
/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento
/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående sida

av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu
/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú na
zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document

A biztonságos használat érdekében az Ön

felelőssége, hogy:

 a berendezés üzembe helyezése előtt figyelmesen

elolvassa a mellékelt CD által tartalmazott összes
dokumentumot,
 a berendezést a SAMES KREMLIN ajánlasainak
valamint a nemzeti és/vagy helyi szabályozásoknak

megfelelően helyezze üzembe, használja, tartsa karban

és javítsa,
 megbizonyosodjon róla, hogy a berendezés
felhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea dvs.
să:

 Citiţi cu atenţie toate documentele de pe CD-ul
anexat, înainte de punerea în funcţiune a

echipamentului,

 Instalaţi, utilizaţi, întreţineţi şi reparaţi echipamentul
conform instrucţiunilor SAMES KREMLIN precum şi
reglementărilor naţionale şi/sau locale,
 Vă asiguraţi că utilizatorii acestui echipament au
fost instruiţi, au înţeles perfect regulile de securitate şi
le aplică integral.

SAMES KREMLIN N° : 578.126.130-1711

DECLARATION UE DE CONFORMITE
EU DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a
continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,

že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a

továbbiakban / Declară că echipamentul precizat mai jos:

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRANCE

Tél. : [phone]

PISTOLETS MANUELS DE PULVERISATION PNEUMATIQUES / AIRSPRAY MANUAL SPRAYING GUNS

/ LUFTZERSTÄUBENDE HAND-SPRITPISTOLEN / PISTOLAS MANUALES DE PULVERIZACIÓN NEUMÁTICAS

FPRO LOCK P LP

FPRO LOCK P CONV

FPRO P LP

FPRO P CONV

Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt
die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme
alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den
relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z

odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou
/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő
alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos

Directive ATEX / ATEX Directive / ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX

/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX

/ ATEX-irányelv

II 2G Ex h IIA T6 X Gb

Procédure d’évaluation de la conformité : Module A Documentation technique (Annexe VIII) archivée par : / Conformity
assessment procedure: Module A Technical documentation (ANNEX VIII) recorded by: / Verfahren zur Konformitätsbewertung:
Modul A Technische Unterlagen (ANLAGE VIII) archiviert durch: / Procedimiento de evaluación de la conformidad: Módulo A
Documentación técnica (ANEXO VIII) archivada por: / Procedura di valutazione della conformità: Modulo A Documentazione
tecnica (ALLEGATO VIII) archiviata a cura di: / Procedimento de avaliação da conformidade: Módulo A Documentação técnica
(ANEXO VIII) arquivada por: / Conformiteitsbeoordelingsprocedure: Module A Technische documentatie (BIJLAGE VIII)
gearchiveerd door: / Förfarande för bedömning av överensstämmelse: Modul A Teknisk dokumentation (BILAGA VIII)
arkiverad av: / Vaatimustenmukaisuusarviointimenetelmä: moduuli A Tekninen dokumentaatio (LIITE VIII) arkistoitu:

/ Procedura oceny zgodności: Moduł A Dokumentacji technicznej (ZAŁĄCZNIK VIII) zarchiwizowane przez: / Postup
posuzování shody: Modul A Technická dokumentace (PŘÍLOHA VIII) archivována: / Postopek preverjanja skladnosti: Modul A
Tehnična dokumentacija (PRILOGA VIII), arhiviral: / Postup posudzovania zhody: Modul A
Technická dokumentácia (PRÍLOHA VIII) archivovaná prostredníctvom: / Megfelelőségértékelési eljárás: A. modul Műszaki
dokumentáció (VIII. MELLÉKLET) archiválta: / Procedura de evaluare a conformităţii: Modulul A
Documentaţia tehnică (ANEXA VIII) este arhivată de:

INERIS 0080 - 60550 Verneuil-en-Halatte - France

SAMES KREMLIN - 2 - N° : 578.126.130-1711

2014/34/UE

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole
responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente
declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la
responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze
conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på

tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności
wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave
o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi
nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a
producătorului.

Philippe PROVENAZ
Directeur Innovation & Développement / Innovation & Development
Director / Direktor für Innovation & Entwicklung / Director de
Inovación y Desarrollo / Direttore Innovazione e sviluppo
/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör
för Forskning och Utveckling / Innovaatio- ja kehitysjohtaja

/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj
/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj
/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i

Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan,

pe data de 22/11/2017 - 11/22/2017

SAMES KREMLIN - 3 - N° : 578.126.130-1711

KREMLIN REXSON N° : 578.001.130-UK-1103

INSTALLATION AND SAFETY

INSTRUCTIONS

TRANSLATION OF THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents
relating to this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RES ERVE THE RIGHT TO MAKE CHANGES WITHOUT
PRIOR NOTICE.

KREMLIN - REXSON

l

150, avenue de Stalingrad

93 245 - STAINS CEDEX – France



: 33 (0)1 49 40 25 25 Fax : [phone]

www.kremlin-rexson.com

KREMLIN REXSON N° : 578.001.130-UK-1103

1. SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

CAUTION : The equipment can be dangerous if you do not follow our
instructions concerning installation and servicing described in this manual
and in accordance with applicable European standards and local national safety
regulations.

Please carefully read all the instruction literature before operating your
equipment.

Only trained operators can use the equipment (To acquire an essential training, please contact the

"KREMLIN REXSON University" training center - Stains).
The foreman must ensure that the operator has understood the safety instructions for this equipment as

well as the instructions in the manuals for the different parts and accessories.
Read carefully all instruction manuals, label markings before operating the equipment.
Incorrect use may result in injury. This equipment is for professional use only. It must be used only for

what it has been designed for. Never modify the equipment. The parts and accessories supplied must be
regularlyinspected. Defective or worn parts must be replaced.

Guards (motor cover, coupling shields, connectors,…) have been designed for a

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

property damage due to destruction, the overshadowing or the partial or total

removal of the guards.

Never exceed the equipment components' maximum working pressure.

Comply with regulations concerning safety, fire risks, electrical regulations in force in the country of final
destination of the material. Use only products or solvent compatible with the parts in contact with the
material (refer to data sheet of the material manufacturer).

PICTOGRAMS

A

D

F

E C G

NIP HAZARD WARNING

MOVING

ELEVATOR

WARNING

MOVING PARTS

WARNING

MOVING
SHOVEL

DO NOT

EXCEED THIS

PRESSURE

HIGH PRESSURE

HAZARD

H

J

L

K

M

Q

RELIEF OR

DRAIN VALVE

WARNING HOSE

UNDER

PRESSURE

WEAR

GLASSES

OBLIGATORY

WEAR OF

GLOVES IS

OBLIGATORY

PRODUCT

VAPOR

HAZARDS

WARNING

HOT PARTS OR

AREAS

N

P

R

ELECTRICAL

HAZARD

WARNING

FIRE HAZARDS

EXPLOSION

HAZARDS

GROUNDING WARNING

(USER)

WARNING

SERIOUS
INJURIES

KREMLIN REXSON N° : 578.001.130-UK-1103

FIRE - EXPLOSION - SPARKS - STATIC ELECTRICITY HAZARDS

A poor earth connection, inadequate ventilation, sparks or static electricity can cause an
explosion or fire. to avoid these risks when using or servicing KREMLIN REXSON equipment,
the following safety procedures must be followed :

 ensure a good earth connection and ground the parts to be handled i.e. solvents,

materials, components and equipment,

 ensure adequate ventilation,
 keep working area clean and free from waste solvents, chemicals, or solid waste i.e.

rags, paper and empty chemicals drums,

 never use electrical switches / power if in an atmosphere of volatile solvent vapour,
 stop working immediatelyin case of electrical arcs,
 never store chemicals and solvents in the working area.
 use paint whose flash point is the highest possible to prevent from any formation of gas

and inflammable vapours (refer to materials' safety instructions),

 install a cover on the drums to reduce the diffusion of gas and vapours in the

spraybooth.

TOXIC PRODUCT HAZARDS

Toxic products or vapours can cause severe injury not only though contact with the body, but
also if the products are ingested or inhaled. It is imperative :

 to know the material products and their risks,
 notified or hazardous materials must be stored in accordance with the regulations,
 the material must be stored in an appropriate container, never place materials in a

container where there is a risk of spillage or leakage,

 a procedure must be applied for the safe disposal of waste material. It must comply with

all prevailing regulations and legislations of the country where the equipment is to be
used,

 protective clothing should always be worn in compliance with the material

manufacturers' recommendations,

 depending on the application and chemical safety instructions, safety glasses, hearing

protective earplug, gloves, foot wear, protective masks and possible breathing
equipment should be worn to comply with the regulations (Refer to chapter "Safety
equipment of KREMLIN selection guide).

CAUTION!

It is forbidden to use material containing high concentrations of halogenated hydrocarbon
solvents with aluminium or zinc fillers .Non-compliance with the instructions may cause
explosion risk causing serious or fatal injury.

KREMLIN REXSON N° : 578.001.130-UK-1103

EQUIPMENT REQUIREMENTS

Guards (motor cover, coupling shields, connectors,…) have been designed for a

safe use of the equipment.

The manufacturer will not be held responsible for bodily injury or failure and / or

property damage due to destruction, the overshadowing or the partial or total

removal of the guards.

PUMP

Before carrying out any work, it is imperative to read and clearly understand the disassembly
and reassembly instructions before servicing. The operator must understand the equipment
and the safety instructions. These instructions are available in the equipment manuals.

F

A

The air motor is designed to be mounted with a pump. Never modify any components or
couplings. When operating, please keep hands away from moving parts. Before starting up the
equipment, please read the PRESSURE RELIEF instructions. Please ensure that any relief or
drain valves fitted are in good working order.

HOSES

 Keep hoses out of circulation areas, moving parts or hot surfaces,
 Never expose product hoses to temperature higher than + 60°C / 140° F or lower than

0°C / 32° F,

 Never pull or use the hoses to move the equipment,
 Tighten all fittings as well as the hoses before operating the equipment,
 Check the hoses regularly; change them if they are damaged,
 Never exceed the working pressure (WP) indicated on the hose.

USED PRODUCTS

Considering the wide variety of products that are available and can be used in our equipment it
is impossible to check and make recommendations for all chemical data,regarding the risks of
possible chemical attack and their long term chemical reaction

KREMLIN REXSON can not be held liable for :

 Compatibilityof wetted parts,
 Risks to staff and the surroundings,
 for worn or defective parts, for faulty equipment or units, or the qualitiy of final product.

It is the responsibility of the user to know and prevent any possible risks such as toxic vapours,
fires or explosions. He shall determine the risks of immediate reactions or pursuant to
repeated exposures of the staff,

KREMLIN REXSON shall not be liable for physical injuries, direct or indirect material damages
caused by the use of chemicals.

KREMLIN REXSON N° : 578.001.130-UK-1103

2. HANDLING

Check the weight and the dimensions of the equipment

(refer to 'Technical features' section of the instruction manual

If weight and dimensions are too important, the unloading must be carried out by means of a forklift or
any other appropriate means with a qualified personnal and in a clear horizontal area to prevent from
risks of damage injury or an accident.

The centre of gravity is not in the centre of the machine : carry out by hand a stability-test after having
lifted the whole at 10 cm / 3.937" maximum.

After the unloading, the handling of the whole (eg: elevator pump) is carried out by means of a pallet
truck taking the bottom part of the frame.

Remark : Each pump motor is fitted with a ring. The ring is designed for the hoisting of one
pump and can not be used for the handling of the complete machine.

3. STORING

Storing before installation :

- Storing ambient temperature : 0 / +50 °C / 0 / +122°F

- Protect the whole against dust, water trickling, dampness and shocks.
Storing after installation :

- Operating temperature : +15 / +35 °C / +59 / +138.2° F

- Protect the whole against dust, water tricling, dampness and shocks.

4. INSTALLATION OF THE EQUIPMENT

The machine is installed on a stable horizontal floor (for eg a concrete flag).

To avoid risks caused by static electricity, the equipment as well as its components
must be grounded.

 For the pumping equipments (pumps, pneumatic rams, frame…), a section wire of 2.5

mm² is fixed on the material. Use this wire to connect the material to “the general
ground”. In case of severe environments (mechanical protection of the wire of earthing
insufficient, vibrations, mobile material…) where function damages at the ground are
probable, the user have to replace the provided wire of 2.5 mm² by a device more
adapted to its environment (wire with a more important section, bonding strip, fixing by
thimble with eyelet…),

The continuity of the ground must be controlled by a qualified electrician. If the continuity
of the ground is not ensured, check the terminal, the wire and the earthing point. Never
use the material without have solved this problem.

 In the severe cases of environments (mechanical protection of the wire of earthing

insufficient, vibrations, mobile material…) where damages of the function put at the
ground are probable, the user will have to replace the wire of 2.5 mm ² provided, by a
device more adapted to its environment (wire of more important section, bonding strip,
fixing by thimble with eyelet…),

 The gun must be 'grounded' via a material hose or an air hose. In case of spraying by

means of a gun with cup, the air hose must be conductive,

 The materials to be painted must also be grounded.

All the materials situated in the working area shall be grounded.

KREMLIN REXSON N° : 578.001.130-UK-1103

 Never store more than necessary inflammable materials inside the working area,
 The materials must be stored into approved drums and grounded,
 Use only grounded metals containers for the use of cleaning solvents,

 Cardboard and paper are prohibited.

5. MARKING OF THE EQUIPMENT

Each equipment has a marking plate.
The plate consists of the name of the manufacturer, the equipment part number and important

information for correct use of the equipment (air pressure, electric power,…).

AIRSPRAY GUN

FPro P

Disassembly / Reassembly

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the

documents relating to the equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NOT CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT

SAMES KREMLIN N° : 578.224.110-UK-1710

PRIOR NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

l

www.sames-kremlin.com

CAUTION :
Before any intervention, shut off the compressed air supply and depressurize the

circuits by triggering the gun. controlling the opening of the gun.

The gun is manufactured under the ATEX agreement and can not be modified.

SAMES KREMLIN will not be held responsible for any failure to comply with that

instruction.

Before removing a component of the gun, some precautions have to be taken :

- Shut off the pump main supply,

- Empty out the paint inside the cup or the receiver,

- Fill the cup or the receiver with cleaning solvent,

- Spray the solvent until it runs clear,

- Shut off the supply air pressure of the gun,

- Shut off the fluid pressure,

- Remove the part to be cleaned or changed.

Before reassemblying the different components, some precautions must be taken :

- Clean all the parts with the appropriate cleaning solvent and a brush.

- Install new seals if it is necessary after having lubricated them with PTFE grease.

- Install new parts if it is necessary.

SAMES KREMLIN - 1 - N° : 578.224.110-UK-1710

FPRO P LP - CONV

A 1

S 1

A 1

S 1

A 1

A 1

A 1

A 1

C2C2S 2

S 2

C2C2S 3

S 3

S 3

FPRO P LOCK LP - LOCK CONV

SAMES KREMLIN - 2 - N° : 578.224.110-UK-1710

Index Instructions Description Part number

A 1
C 2

S 1

S 2

S 3

PTFE grease
Low strength

- Anaerobic Adhesive
Torque screwing :

18 Nm / 13.276 Ft/Lbs
Torque screwing :

10 Nm / 7.376 Ft/Lbs
Torque screwing :

5 Nm / 3.688 Ft/Lbs

PTFE grease (10 ml / 0.0026 US gal)
Loctite 222 (50 ml / 0.013 US gal)

 PROJECTOR (IND. 1 + 7 + 11) & VORTEX (IND. 18) REPLACEMENT

560.440.101

554.180.010

Unscrew the aircap assembly (1), then remove the aircap ring (2), the aircap only (4), the stop ring
(5) and the ring seal (6).

Trigger the gun (36) then unscrew the nozzle assembly (7) with the wrench provided with the gun.
Remove the distribution ring (8) and the nozzle seal (10).
Remove the vortex (18) and the distribution ring (19).
For the guns, model FPRO P LP and CONV : unscrew the needle stop (22), then remove the needle

spring (20) and the needle (11) by the rear part of the gun.
For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve (17),

then remove the needle (11) by the rear part of the gun.
Check parts’ conditions. Change them if necessary.
Lubricate the needle (11) and the needle spring (20) with grease.
For the guns, model FPRO P LP and CONV : reinstall them as well as the needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall them as well as the needle stop

sleeve (17) - screwing torque : 5 Nm / 3.688 Ft/Lbs.
Reinstall the distribution ring (19) and the vortex (18).
Reinstall the new nozzle assembly (7). Tighten it by means of the wrench - screwing torque : 18 Nm

/ 13.276 Ft/Lbs.
Reinstall the new aircap assembly (1).
NOTA : the gun can operate without vortex (18) if necessary.

SAMES KREMLIN - 3 - N° : 578.224.110-UK-1710

 NEEDLE PACKING (IND. 13) REPLACEMENT

Make sure there is no more paint inside the gun.
For the guns, model FPRO P LP and CONV : unscrew the needle stop (22) and remove the needle

spring (20).
For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve (17) and

remove the needle spring (20).
Remove the needle (11) completely by the rear part of the gun.
Dismount the trigger (36) by removing the screw (39) and the trigger spindle (38) by means of two

wrenches n° 5.5.
Unscrew the packing holder (16) by means of the wrench supplied with the gun.
Take off the needle packing (13) that consists of a seat (14) and a bearing (15).
Insert the bearing (15) into the seat (14) and replace the whole in the gun.
Screw the packing holder (16) moderately.
Reinstall the needle (11).
For the guns, model FPRO P LP and CONV : reinstall the lubricated needle spring (20) and the

needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall the lubricated needle spring (20)

and the needle stop sleeve (17) - screwing torque : 5 Nm / 3.688 Ft/Lbs.
Tighten up the packing holder (16) by means of the wrench supplied with the gun and unscrew it by

a 1/4 turn.
Remount the trigger (36).
Feed paint
If there is a leak, screw slightly.

 AIR VALVE (IND. 23) REPLACEMENT

For the guns, model FPRO P LP and CONV : unscrew the needle stop (22), then remove the needle
spring (20) and the needle (11) by the rear part of the gun.

For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve (17),
then remove the needle spring (20) and the needle (11) by the rear part of the gun.

Trigger the gun (36) the unscrew the needle stop sleeve (17) by means of the wrench supplied with
the gun.

Take off the valve spring (29) as well as the air valve body (24), the air valve stop (30) and the
carrier (28).

Reinstall the carrier (28) on the new air valve body (24).
Install that new assembly, the air valve stop (30), the lubricated valve spring (29) into the gun body.
Screw the needle stop sleeve (17).
For the guns, model FPRO P LP and CONV : reinstall the needle (11), the lubricated needle spring

(20) and the needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall the needle (11), the lubricated

needle spring (20) and the needle stop sleeve (17) - screwing torque : 5 Nm / 3.688 Ft/Lbs.

SAMES KREMLIN - 4 - N° : 578.224.110-UK-1710