SAMES SA54L16, SA54L19, SA5413, SA5414, SA5416 Datasheet

...
sames
SA541, SA54L1
FEATURES
Selectable Loop-Disconnect (Pulse)
or DTMF (Tone) dialling modes
32 Digit Last Number Redial (LNR)
Selectable Interdigit Pause (IDP)
500ms or 800ms
tact keypad
On-chip Darlington transistor pair for
DTMF tone filtering
Low power CMOS technology enables
direct operation from Telephone line
Optional use of external capacitor for
oscillator
PULSE/DTMF SWITCHABLE DIALLERS
Keypad switchable Loop-Disconnect to
DTMF during a call
Selectable Break:Make Ratios 2:1 or
3:2
Uses inexpensive 560KHz ceramic
resonator
Earth Loop Recall and Timed Break
Recall (Timed Flash)
Low on-hook Supply Current options
SA5413 - 5µA @ 2.5V SA5416 - 1µA @ 2.5V SA5419 - 1µA @ 3.0V
Call, barring/locking feature available
on the SA54L1
PIN CONNECTIONS: SA541
PIN CONNECTIONS: SA54L1
M57-1529 PDS039-SA541-001 REV. B 02-09-94
1/16
SA541
sames
2/16
Supply Voltage VDD - V
SS
-0,3 6,5 V Voltage on any pin (except HSW) VSS -0,3 VDD +0,3 V Voltage on pin HSW VSS -0,3 V See Note 1 Current at any pin -1 1 mA (except HSW, FILTOUT and FILTIN) Current at pin FILTOUT 0 0,1 mA Current at pin FILTIN -5 0 mA Operating Temperature -25 70 °C Storage Temperature -55 125 °C
* Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This a stress rating only. Functional operation of the device at these or any other condition above those indicated in the operation sections of this specification, is not implied. Exposure to Absolute Maximum Ratings for extended periods may affect device reliability.
Note 1: A diode is internally connected between this pin and VDD. Provided current is
externally limited to 300µA max, no damage will occur.
ABSOLUTE MAXIMUM RATINGS *
Parameter Min Typ Max Unit Notes
SA541
sames
3/16
Condition Min Ty p Max Unit Notes
Supply voltage: on-hook 1,8 5 ,7 V For memory retention
off-hook 2,4 5,7 V
Hookswitch input: on-hook 0,2 V
DD
off-hook 0,8 V
DD
Supply Current: on-hook
SA5413 <0.2 5 µA V
DD
= 2.5V
SA5416 <0.2 1 µA V
DD
= 2.5V
Sa5419 <0.2 1 µ A V
DD
= 3.0V off-hook 1,5 µA If MF OUT is low MF tone sending 1,0 m A LD impulsing 200 µA
Output High Voltage 2,2 V I = -1mA (MASK, MUTE and IMP Outputs) Output Low Voltage 0,3 V I = +1mA (MASK, MUTE and IMP Outputs) MF OUT d.c. Level During Tone Sending 0,9V
DD
V MF OUT Output Resistance 3 k 'Key Pressed' Resistance 2 k 2,5V<V
DD
<5,7V
'Key Not Pressed' Resistance 500 k 2,5V<V
DD
<5,7V
Darlington Pair Current Gain 600 50,000 I
e
=100µA,Vce=2V
DC ELECTRICAL CHARACTERISTICS
(VDD = 2,5V at 25°C, unless otherwise specified)
AC ELECTRICAL CHARACTERISTICS
(VDD = 2,5V at 25°C, unless otherwise specified)
Condition Min Typ Max Unit Notes
Oscillating Frequency 560 kHz Tone Output: Low Group 68 77 mVrms No Load
High Group 97 109 mVrms No Load High-to-Low Group Amplitude Ratio 1,5 2 2,5 dB At MF Out Total harmonic Distortion: 0-4KHz 1,5 %
0-10KHz 2,5 % 0-50KHz 5,0 % 0-200KHz 6,5 10 %
SA541
sames
4/16
FUNCTIONAL OVERVIEW
The SAMES SA54X1 is a family of keypad switchable Loop Disconnect (LD)/Dual Tone multi-Frequency (DTMF) dialler devices for use in low-cost, dual dialling mode telephone instruments.
The devices feature automatic storage of a single telephone number of up to 32 digits for Last Number Redial (LNR) purposes. The low current consumption of the SA54X1 ensures memory retention while powered from the line.
Two modes of operation are available. The first is a LD/DTMF mode which operates normally in LD mode, but can be switched temporarily via the keypad to DTMF mode during a call. This mode is intended for applications such as home banking, credit-card verification and other applications requiring low speed data communications. The second mode allows DTMF dialling only.
The Lock function will be described in the Functional Description. The SA54X1 is pin compatible with SAMES' SA54X5 family of diallers.
Ordering Information S A 5 4 X 1 X
Lock Option L: with (22 pin package)
Blank: without (20 pin package)
On-Hook Current Option
3 5µA @ 2.5V
6 1µA @ 2.5V
9 1µA @ 3V
4 1µA @ 3V (and TBR Period = 300 mSec)
Keypad R1 R2 R3 R4 C1 C2 C3
Nominal frequency (Hz) 697 770 852 941 1209 1336 1477 Deviation from nominal (%) -,07 -,10 +,19 -,15 -,17 -,20
-,22
There will be an additional error due to a deviation in the oscillator frequency from 560 kHz.
SA541
sames
5/16
Block Diagram
Figure 1 depicts the SA54X1 block diagram, while Table 1 lists the respective pin functions.
Figure 1: SA54X1 Block Diagram
Loading...
+ 11 hidden pages