Assembly sequence: (See overleaf for images)
• Always check the goal post and net for defects before use and
replace damaged parts.
• It is recommended that the goal is assembled by an adult.
• Assemble the base first.
• Fit the uprights.
• Assemble the crossbar.
• Fit the crossbar.
• Assemble the tension bars, 2 item 7’s and 1 item 9.
• Fit the tension bar assembly to the goal. IT IS IMPORTANT that
the tension bar is fitted to the top of the goal first then bend
down and fit in the large hole in the base.
• Fit the net by wrapping the net round the tube and clipping on
the inside. Coloured cord to the TOP of the goal.
• Ensure the posts are upright and the crossbar is level before
securing to the ground with the anchors.
Samba Goal 6ft x 4ft
Locking
(183cm x 122cm)
Assembly Instructions and Safety Procedures
BG Sports International Ltd (T/a Samba Sports) Walton St, Colne, Lancs, BB8 0EN
Tel: 01282 860077 Fax: 01282 860033
Email: info@sambasports.co.uk Website: www.sambasports.co.uk
Safety Procedures
Safety:
• Always check the goal post and net for defects before use and replace damaged parts.
• Do not use the goal with faulty parts.
• The goal must always be secured to the ground. Weights on hard surfaces, ground anchors on grass.
• Never climb on the net or frame.
• The goal must never be used without the net fitted.
Information:
• This goal has been independently tested and complies to BS EN Parts 1, 2, 3 safety standard.
• Not suitable for children under 3 years old due to small parts i.e. quick clips and length of cord.
• It is recommended that the goal is assembled by an adult .
Please note: Not all goals are supplied with coloured corners and connectors
Loading...