Salus AHTR5024 Installer Manual

INSTALLER MANUAL

Wired Digital Thermostat

Model: AHTR5024

Contents of the box

Manual Contents:

Box Contents Introduction Product Compliance and Safety Information Installation User Interface Status/LED indication Installers notes Warranty

Icons used in this manual:

Safety

Important info

Your beneﬁt

Fixing Screws 1 x Installer Manual

INSTALLER MANUAL

Wired Digital Thermostat

Model: AHTR5024

AHTR5024 Thermostat

2 AHTR5024 Instruction Manual

Product Compliance and Safety Info

AHTR5024 Instruction Manual 3

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

4 AHTR5024 Instruction Manual

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003

du Canada.

Product Compliance and Safety Info Continued

AHTR5024 Instruction Manual 5

Safety Information

Use in compliance with safety regulations. The unit is to be used for the control of room temperature inside the house.

Installation This accessory must be ﬁtted by a competent person, and installation must comply with the guidance, standards and regulations applicable to the city, country or state where the product is installed. Failure to comply with the relevant standards could

lead to prosecution.

Product Compliance and Safety Info Continued

Product Description

Installing the unit

Thank you for purchasing the SALUS AHTR5024 Thermostat. This thermostat is a device that lets you customize the heating and cooling of your home as needed.

The AHTR5024 device from SALUS North America is a stylish and accurate digital room thermostat that is ﬁtted with a large easy to read LCD screen and one touch buttons. You can now simply adjust your home temperature as desired in order to create a comfortable home environment.

We hope you enjoy our product.

Install the AHTR5024 digital room thermostat roughly about 1.5m above ﬂoor level. It should be mounted in a location where the thermostat is easily accessible and away from direct sunlight. You can mount the thermostat directly on the wall or you can install it on top of a wall-box.

6 AHTR5024 Instruction Manual

1. Mounting the Thermostat

Gently remove front housing.

Without ﬂoor sensor With ﬂoor sensor

AHTR5024 Instruction Manual 7

2. Terminal Connection

N

L

CO

L

N

S1

ACTUATOR

OPTIONAL EXTERNAL

PROBE

E.G.

HEAT

PUMP

OUTPUT

TO MULTIPLE

DEVICES

NSB

OUTPUT

230VAC

50Hz

N

CO

L

N

S1

Note: You can wire the thermostat directly to the AKL08 wiring centre or to an actuator (purchased separatly).

8 AHTR5024 Instruction Manual

24VAC

50Hz

H

N

CO

L

N

S1

H

N

CO

L

N

S1

H

N N

S1

H

N N

S1

H

N N

S1

SH

H

3. Thermostat Icons

BOX means to select mode. e.g. means Hi temp is selected means the Hi temp is not selected.

Sunny: Hi comfortable temperature

Moon: Low comfortable temperature

Indicates AUTO ON or AUTO OFF

Frost Protection Indicator: Frost protection is active, not available in cooling mode.

Indicates that the Party Mode is active

Indicates that the Holiday Mode is ON.

Heat Mode indicator: Indicates heating is running

AHTR5024 Instruction Manual 9

4. Thermostat Icons Continued

Programs number indicator.

Indicates the time.

Indicates the the day of the week

Temporary override indicator: The hand will appear until the next programs starting time.

Cool Mode indicator: The icon is ﬂashing when cooling mode is active

Temperature indicator

• Display the room temperature

• Display the set temp

10 AHTR5024 Instruction Manual

5. Button Functions

Mode selection. Long press to return home without saving.

OK key. Short press to conﬁrm selection. Long press to save and return home. Long press to enter Temperature oﬀset Heat/Cool.

Decrease or increase Setpoint Temperature.

OR

Note: LCD backlight is activated by pressing any key.

AHTR5024 Instruction Manual 11

6. Setting Date and Time

When you ﬁrst power up your device you will have to set up the date and time.

Press to conﬁrm.

Press or to choose 12/24 hr then press to conﬁrm.

3

1 2

4

12 AHTR5024 Instruction Manual

X.x

6. Setting Date and Time

Set the hour by using or

Set the minutes by using or . Press to conﬁrm.

5 6

Set the date using the or . Press to conﬁrm.

7 8

Note: You can access the date and hour by long pressing . After that press and to conﬁrm.

AHTR5024 Instruction Manual 13

16

7. Setting Your Programs

You can customise your programs by long pressing when on the program screen.

3

2

4

1

Set the hour using or . Press to conﬁrm. Repeat the procedure for setting the minutes.

Select the desired program or by pressing or . Press to conﬁrm.

Note: If you want to select another Program Proﬁle (from the available 5), please enter in Installer Mode, choose option d17 and after that select the desired program.

14 AHTR5024 Instruction Manual

7. Setting Your Programs

You can select and customise any of the following programs:

Program Prole 1

5 days (Monday to Friday)

Program

Time

Heat set

point

Cool set

point

1 6:00 Sunny Sunny

2 9:00 Moon Moon

3 16:00 Sunny Sunny

4 23:00 Moon Moon

5 --:-- --:-- --:--

6 --:-- --:-- --:--

2 days (Saturday to Sunday)

Program

Time

Heat set

point

Cool set

point

1 7:00 Sunny Sunny

2 23:00 Moon Moon

3 --:-- --:-- --:--

4 --:-- --:-- --:--

5 --:-- --:-- --:--

6 --:-- --:-- --:--

AHTR5024 Instruction Manual 15

7. Setting Your Programs

Program Prole 2

5 days (Monday to Friday)

Program

Time

Heat set

point

Cool set

point

1 6:00 Sunny Sunny

2 22:30 Moon Moon

3 --:-- --:-- --:--

4 --:-- --:-- --:--

5 --:-- --:-- --:--

6 --:-- --:-- --:--

2 days (Saturday to Sunday)

Program

Time

Heat set

point

Cool set

point

1 7:00 Sunny Sunny

2 23:00 Moon Moon

3 --:-- --:-- --:--

4 --:-- --:-- --:--

5 --:-- --:-- --:--

6 --:-- --:-- --:--

16 AHTR5024 Instruction Manual

7. Setting Your Programs

Program Prole 3

5 days (Monday to Friday)

Program

Time

Heat set

point

Cool set

point

1 5:00 Sunny Sunny

2 8:00 Moon Moon

3 14:00 Sunny Sunny

4 22:00 Moon Moon

5 --:-- --:-- --:--

6 --:-- --:-- --:--

2 days (Saturday to Sunday)

Program

Time

Heat set

point

Cool set

point

1 7:30 Sunny Sunny

2 22:30 Moon Moon

3 --:-- --:-- --:--

4 --:-- --:-- --:--

5 --:-- --:-- --:--

6 --:-- --:-- --:--

AHTR5024 Instruction Manual 17

7. Setting Your Programs

Program Prole 4

5 days (Monday to Friday)

Program

Time

Heat set

point

Cool set

point

1 6:00 Sunny Sunny

2 9:00 Moon Moon

3 15:00 Sunny Sunny

4 22:30 Moon Moon

5 --:-- --:-- --:--

6 --:-- --:-- --:--

2 days (Saturday to Sunday)

Program

Time

Heat set

point

Cool set

point

1 7:30 Sunny Sunny

2 23:00 Moon Moon

3 --:-- --:-- --:--

4 --:-- --:-- --:--

5 --:-- --:-- --:--

6 --:-- --:-- --:--

18 AHTR5024 Instruction Manual

7. Setting Your Programs

Program Prole 5

5 days (Monday to Friday)

Program

Time

Heat set

point

Cool set

point

1 6:00 Sunny Sunny

2 10:00 Moon Moon

3 16:00 Sunny Sunny

4 23:00 Moon Moon

5 --:-- --:-- --:--

6 --:-- --:-- --:--

2 days (Saturday to Sunday)

Program

Time

Heat set

point

Cool set

point

1 7:30 Sunny Sunny

2 23:30 Moon Moon

3 --:-- --:-- --:--

4 --:-- --:-- --:--

5 --:-- --:-- --:--

6 --:-- --:-- --:--

AHTR5024 Instruction Manual 19

8. How to reset the thermostat

31 2

Press the indicated keys together for 3 seconds.

Select P47 if you want to reset to factory settings.

Press to conﬁrm.

4 5

Press to conﬁrm.

20 AHTR5024 Instruction Manual

9. Installer Mode

Select P49 if you want to enter Installer Mode.

You have reached the Installer Mode. Select your option by using or . Press to conﬁrm.

Press to conﬁrm.

Press the indicated keys together for 3 seconds.

3

1 2

4

Note: This function allows you to customise your thermostat as you desire. In order to do this please consult the tables on the next pages.

AHTR5024 Instruction Manual 21

10. Functions explained

d05

dxx

d01

d02

d07

d08

d03

d04

Heating Control

Room temp. oset

Valve Protection

Frost Setpoint

OUT sensor probe (S1/S2)

Air sensor or Floor sensor

Cooling Control

0

-3.0C to + 3.0C

0/1

5ºC - 17ºC

0

1 2

1

1 2

PWM (Pulse-width modulation)

Oset room temp measuring error (in 0.5ºC)

0 = VP disabled 1 = Enable

Out sensor probe not connected

A: if d03 = 0, IN sensor controls Tr

ON-OFF: 0.5ºC (± 0.25ºC)

F: if d03 = 0, IN sensor controls Tr

A: if d03 = 1, IN disabled and OUT controls Tr

ON-OFF: 1.0ºC (± 0.5ºC)

F: if d03 = 1, IN disabled and OUT controls Tr Floor Protection

Out sensor probe connected

ON-OFF: 0.5C (± 0.25ºC) ON-OFF: 1.0C (± 0.5ºC)

0

0.0ºC

1

5.0ºC

0

2

D setting function

Parameter/

Values

Default

value

Denition

22 AHTR5024 Instruction Manual

d00 Select C/F

0

1

Select C

Select F

0

10. Functions explained

d09

d11

12/24 Hour Format

Daylight Saving Time

0

1

12hr

O

24hr

On

(DST)

1

d12 Maximum limitation of

heating setpoint

5ºC - 35ºC

35ºC

d13 Maximum limitation of

cooling setpoint

5ºC - 40ºC

5ºC

d14 Floor sensor protection limit

(heating high limit-HL)

11ºC - 45ºC

Turn o relay output when oor sensing temp >

27ºC

d15

d16

Floor sensor protection limit

(heating low limit-LL)

(cooling)

6ºC - 40ºC

6ºC - 45ºC

Turn on relay output when oor sensing temp <

Turn o relay output when oor sensing temp <

10ºC

6ºC

protecting limit, step is 0.5ºC

AHTR5024 Instruction Manual 23

10. Functions explained

d17

d18

d19

d20

Preset program selection

Heat/Cool Mode Selection

Cooling Blocked

Actuators loading selection for dierent temperature compensation.

1: x 1 actuator loading 2: x 2 actuators loading 3: x 3 actuators loading 4: x 4 actuators loading 5: x 5 actuators loading

1-5

0 or 1

1 to 5 1

0

0: No connection 1: Connection

1: Cooling disabled

0: Cooling allowed

Select one of these 5 default programs. Once selected, default program will overwrite present program. Selected default program can be edited by the user in the User Setting Mode.

1

11. Cooling Blocked

When When the thermostat is set on Cooling Disabled (d19-->1) it will block the cooling function for single rooms until the device will receive the heating command. During the periods of cooling blocked no special indicator will be displayed on the LCD screen. Ice ﬂake will also be turned oﬀ.

Note: d19 will be available only if d18 is set on 1 (Heat/Cool Mode selection Connected).

24 AHTR5024 Instruction Manual

The maximum time allowed on the Party Mode is 9 h 50 min and can be set from 0-10 min.

3

If you want to exit Party Mode, press or to move the (box) to a diﬀerent program. Once Party Mode ends the countdown automatically resets to 0.

12. Party Mode

Press or to select Party Mode.

Press or to select the time for Party Mode.

1 2

AHTR5024 Instruction Manual 25

13. Vacation Mode

14. Frost Mode

Press or to select Vacation Mode.

Press or to select the number of vacation days.

1 2

Note: Vacation Modes ends when it reaches day 0. After that the device goes back to Auto Mode.

1 2

Press or to select Frost Mode. Press to conﬁrm.

Press or if you want to change the Frost Mode temp. Press to conﬁrm.

26 AHTR5024 Instruction Manual

15. Temperature Oﬀset

31 2

Long press in order to enter Settings Mode.

Press to enter

Setting Mode.

Press or in order to

set the Temperature Oﬀset.

4 5

The Temperature Oﬀset can be set at any value

between -3ºC and +3ºC. Press to conﬁrm.

AHTR5024 Instruction Manual 27

Technical Speciﬁcation

Model: AHTR5024

Voltage 24 VAC, +/-10%, 50/60 Hz

Operating performance 24 V, 18W

Temperature setback Adjustable

Temperature range 5°C – 35°C

Span +/- 0.5°C or +/- 0.25°C

Storage temperature -20°C to +60°C

Ambient temperature 0 °C up to 45 °C

Degree of protection IP 30

Conformity according to FCC and IC

Housing material PC, V2

Color RAL 9010 pure white

Connection Screw terminal

Weight 125 g net / 170 g gross

Puls-wide-modulation (PWM) Yes

Clock, Timer Yes, programmable

Proﬁle Modes 3 ( Sun, Moon, Automatic)

Heating and Cooling Yes, automatically Change Over on the Wiring Centre

Parameter adjustment Yes, in Installer Mode Dimensions 85mm*85mm*25mm

28 AHTR5024 Instruction Manual

Notes

...................................................................................................................................................................................

..................................................................................................................................................................................

AHTR5024 Instruction Manual 29

Notes

...................................................................................................................................................................................

..................................................................................................................................................................................

30 AHTR5024 Instruction Manual

Warranty

Customer Name: ......................................................................................................................................

Customer Address: .................................................................................................................................

.............................................................................................................................................................................

....................................................................................... Post Code: ............................................................

Tel No: ................................................................ Email: .............................................................................

Engineers Company: .............................................................................................................................

Tel No: ................................................................ Email: .............................................................................

Instalation Date: .......................................................................................................................................

Engineers Name: ......................................................................................................................................

Engineers Signature: .............................................................................................................................

SALUS North America warrants that this product (AHTR5024) will be free from any defect in materials or workmanship, and shall perform in accordance with its speciﬁcation, for a period of ﬁve years from the date of installation. SALUS North America sole liability for breach of this warranty will be (at its option) to repair or replace the defective product.

AHTR5024 Instruction Manual 31

SALUS North America is a member of the Computime Group

Issue Date: Oct 2016 00188

For PDF Installation guide please go to www.salusna.com

Maintaining a policy of continuous product development SALUS Controls plc reserve the right to change speciﬁcation, design and materials of products listed in this brochure without prior notice.

www.salusna.com

SALUS NORTH AMERICA, 850 MAIN STREET, REDWOOD CITY, CA 94063

EMAIL: SALES@SALUSNA.COM TEL:

+1-650-360-1725

Salus AHTR5024 Installer Manual

Specifications and Main Features

Frequently Asked Questions

User Manual