Salton MAXHM10 User Manual

10-Speed Mixer

Use and Care Guide

MAXHM10

MAXHM10 Use and Care Guide1.

I M P O RTANT SAFEG UAR DS

When using electrical appliances, basic safety precautions should
always be followed including the following:

■ Read all instructions before using Mixer.

■ Close supervision is necessary when Mixer is used near children.

■ This appliance is not for use by children.

■ Do not leave Mixer unattended.

■ Unplug from outlet when not in use, before putting on or taking

off parts and before cleaning.

■ Do not contact moving parts. Keep hands, hair, clothing, as well
as spatulas and other utensils away from beaters or dough hooks
during operation to reduce the risk of injury to persons, and/or
damage to the Mixer.

■ Do not operate a damaged Mixer. Do not operate with a damaged
cord or plug or after the Mixer malfunctions, or has been dropped
or damaged in any manner. Contact Consumer Service for return
authorization, examination, repair or electrical or mechanical
adjustment.

■ To protect against the risk of electrical shock do not immerse
body of Mixer, cord or plug in water or other liquid. See
instructions for cleaning.

■ The use attachments not recommended or sold by the
manufacturer may cause fire, electric shock or injury.

■ Do not use outdoors or while standing in a damp area.

■ Do not use Mixer for other than intended use.

■ Do not let cord hang over edge of table or counter or touch hot

surfaces, including the stove.

■ Remove beaters or dough hooks from Mixer before washing them.

■ Do not place Mixer on or near a hot gas or electric burner, or in a

heated oven.

.

READ AND SAVE
TH ES E I N STRU CTION S

WARNING: A risk of fire and electrical shock exists in all

electrical appliances and may cause personal injury or death.
Please follow all safety instructions.

SAVE TH ESE IN STRUCTIO N S

CAUTION: A short power supply cord is provided to reduce the

risk of personal injury resulting from becoming entangled in or
tripping over a longer cord. Extension cords are available from
local hardware stores and may be used if care is exercised in their
use. If an extension cord is required, special care and caution is
necessary. The cord must also be: (1) marked with an electrical
rating of 125 V. and at least 10 A., 1250 W., and (2) arranged so
that it will not drape over the countertop or tabletop where it
can be pulled on by children or tripped over accidentally.

POLARIZED PLUG: This appliance has a polarized plug
(one blade is wider than the other). As a safety feature to reduce the
risk of electrical shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.

This product is for household use only.

Using Your 10- Speed Mixer

PRODUCT MAY VARY SLIGHTLY FROM I LLUSTRATIONS

MAXHM10 Use and Care Guide3.

Speed
Control
Lever

Burst of Power

Lo/Hi Switch

Eject

Ventilation

Soft­Touch
Handle

Cord Wrap

Speed
Control
Lever

5 speeds at
LO or HI for
a total of
10 speeds,
plus Burst-of
Power at
any speed.

Chrome Plated Dough Hooks
(Dough Hook w/Collar - P/N 70642C)
(Dough Hook w/out Collar - P/N 70642)

Chrome Plated Beaters
(Beater w/Collar - P/N 70640C)
(Beater w/out Collar - P/N 70640)

Figure 1

Figure 2

Chrome Plated
Dough Hooks

Chrome Plated
Beaters

Mixing Guide

Use the chart to help you determine the proper speed control
setting and speed switch setting for mixing.

Best for mixing dry ingredients and folding in
liquid ingredients, egg whites and whipped cream.

Ideal for creaming, stirring, making sauces, gravies,
puddings and quick breads.

All purpose mixing.
All purpose mixing.
Beats and creams butter and sugar for cake mixes

and frostings.
Great for thicker batters.
Best for whipping cream, beating egg whites or

mashing potatoes.

1-2

Speed

Control

Speed

Switch

Procedure

LO

LO
LO

HI

HI

3-4

5
1

2-3 HI

4-5

NOTE: Be sure speed control lever is in the OFF position before
changing speed switch from LO to HI or from HI to LO.

CAUTION: UNPLUG APPLIANCE FROM ELECTRICAL
OUTLET BEFORE ASSEMBLING, REMOVING PARTS OR
CLEANING. NEVER PLACE BODY OF MIXER OR CORD IN
WATER OR OTHER LIQUIDS.

Before Using Your 10-Speed Mixer For The First Time

■ Please fill out information that follows warranty.

■ Before using the Mixer for the first time, wash beaters and dough

hooks in warm, soapy water. Rinse and dry thoroughly, see
Cleaning Instructions.

Burst-of-Power

The Burst-of-Power provides maximum power to get through tough
mixing tasks at any speed. Press the burst of power button to obtain
maximum mixing speed anytime an extra boost of power is needed
for thick, heavy batters. Release the button and the mixing returns to
the previously selected speed.

CAUTION: Do not use the burst of power in excess of
2 minutes at a time, as the motor may overheat.

Beaters and Dough Hooks

Use these chrome plated beaters to cut through thick or thin batters
with ease. They are perfect for all-purpose mixing.

1. Position speed control lever to OFF.

2. Unplug from outlet.

3. Choose either the set of beaters or the set of dough hooks.

4. Press the beater /dough hook with the collar into the left opening
(marked L on the bottom of Mixer). Align notches on the
beater/dough hook with the slots inside the hole. Push until it
clicks into position. Insert the other beater/dough hook.

5. Plug into 120 V ~ 60 Hz outlet.

6. Make sure the Mixer is OFF. Slide the speed switch to LO or HI.
Slide the speed control lever up to 1, 2, 3, 4 or 5 speed.

NOTE: Be sure to turn Mixer OFF before sliding speed switch
from LO to HI or vice-versa.

7. To remove beaters or dough hooks, turn speed control lever to
OFF and unplug from outlet. Grasp stems of beaters/dough hooks
and press down firmly on the speed control lever to eject.

User Maintenance Instructions

This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Contact a qualified
appliance repair technician if the product requires servicing.

Cleaning Instructions

CAUTION: UNPLUG APPLIANCE BEFORE CLEANING.

NEVER PLACE BODY OF MIXER OR CORD IN WATER OR
OTHER LIQUIDS.

1. Position speed control lever to OFF.

2. Unplug from outlet.

3. Grasp stems of beaters or dough hooks and press down firmly on
the speed control lever to eject.

4. Wash, rinse and dry beaters and dough hooks by hand after
each use.

5. Wipe body of Mixer and storage caddy with a soft, damp cloth.
Do not use harsh detergents or abrasive cleaners to clean any part.

MAXHM10 Use and Care Guide5.