Salton HB-1101 User Manual

hand blender
Instruction Booklet
Model: HB-1101
Booklet_HB-1101_ENG:Salton Booklet 5/25/09 3:43 PM Page 1
®
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the following:
1. Read all instructions.
2. To protect against electrical hazards, do not immerse motor body, cord, plugs, or the appliance in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use before putting on or taking off parts and before cleaning.
5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to SALTON for examination, repair or electrical or mechanical adjustment. See Warranty section.
6. Avoid contacting moving parts.
7. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the unit. A scraper may be used but must be used only when the unit is not running.
8. Blades are sharp. Handle carefully.
9. When mixing liquids, especially hot liquids, use a tall container or make small quantities at a time to reduce spillage, splattering and possibility of injury from burning.
10. The use of accessories or attachments, not recommended or sold by SALTON may cause fire, electric shock or injury.
11. Do not use outdoors.
12. Do not let cord hang over edge of table or counter, or touch hot surfaces.
13. Do not place on or near a hot gas or electric burner, or in a heated oven.
14. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to ‘OFF’, then remove plug from wall outlet.
15. This appliance is for Household Use Only. Do not use appliance for other than intended use.
16. Do not leave unit unattended while in use.
2
Booklet_HB-1101_ENG:Salton Booklet 5/25/09 3:43 PM Page 2
3
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
DESCRIPTION OF PARTS
1. Motor Body
2. Power Button
3. Turbo Button
4. Blending Attachment
5. Stainless Steel Blade
6. Blade Guard
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Wash the Blending Attachment in warm soapy water. NOTE: Be careful when handling the Stainless Steel Blade on Blending
Attachment, the blades are sharp.
4. Rinse and dry thoroughly.
5. Wipe the Motor Body with a damp cloth. DO NOT IMMERSE THE MOTOR BODY IN WATER OR ANY OTHER LIQUID.
1
2
3
4
5
6
Booklet_HB-1101_ENG:Salton Booklet 5/25/09 3:43 PM Page 3
Loading...
+ 6 hidden pages