SaltDogg SHPE2000 User Manual

TM

Instruction Sheet Supplement

FABRICATE AND INSERT

SPACER BETWEEN SPREADER

AND FRONT WALL.

Bed Spacer for SHPE1500,
SHPE2000 Series Spreaders

The picture below shows an alternative way to
install spreader in your truck. Recommended for
trucks equipped with snow plow. Spacer has to be
fabricated and installed by installer. All previously
noted installation requirements must be followed.

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone [phone] • Fax [phone]

Toll-Free Fax [phone] • saltdogg.com

WARRANTY

Buyers Products Co. warrants all truck/trailer hardware manufac­tured or distributed by it, to be free from defects in material and
workmanship for a period of one year from date of shipment. Parts
must be properly installed and used under normal conditions. Any
product which has been altered, including modification, misuse,
accident or lack of maintenance will not be considered under
warranty. Normal wear is excluded. The sole responsibility of
Buyers Products Co. under this warranty is limited to repairing or
replacing any part or parts which are returned, prepaid, and are
found to be defective by Buyers Products Co. Authorization from
Buyers Products Co. must be obtained before returning any part.
No charges for transportation or labor performed on Buyers’ prod­ucts will be allowed under this warranty.

3012207 Rev. B