SaltDogg 025000A User Manual
Quality since 1946
Wintergate
Spreader
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
Toll-Free Fax 800-841-8003 • buyersproducts.com
Mount
for TGS01 Series & TGS05 Series
Tailgate Salt Spreaders
025000A
IMPORTANT
Installation Instructions, Parts List
and Maintenance Instructions
Place in vehicle glove box after installation.
Quality since 1946
Toll-Free Fax 800-841-8003 • buyersproducts.com
Installation Instructions
9049 Tyler Blvd. • Mentor, Ohio 44060
Phone (440) 974-8888 • Fax (440) 974-0165
025000A Wintergate Spreader Mount
Parts List for Wintergate Spreader Mount
ITEM PART NO. QTY. DESCRIPTION
1 Truckbedrack 1 Pick-up Bed, General Dim.
2 Tailgaterack 1 Tailgate
3 Bumper 1 Bumper
4 3014241 1 Bed Rail Mount DS
5 3012511 2 Crossmember Bracket
6 3007512 1 Bumper Bracket, PS
7 3007513 1 Bumper Bracket, DS
8 3007793 1 Cross Member w/Handle
9 3007516 1 Cross Member
10 3012224 4 Screw, HHC 3/8-16x2-1/2 Ful-Thrd Gr. 2, ZN
11 FWF038081006 4 Washer, Flat 3/8 SAE ZN
12 FWL38069009 4 Washer, Lock RHS-3/8 ZN
13 FCB038016125 6 Bolt, Carriage 3/8-16 x 1 1/4 Gr. 5, ZN
14 FWF038100007 6 Washer, Flat 3/8 USS ZN
15 FNE038016044 6 Nut, Nylock 3/8-16 x 7/16 ZN
16 3007755 2 Plate, Retainer
17 B08562101 3 Pin, Hinge 5/8"
18 66050 4 Snapper Pin, 1/4 x 2, Ylw ZN
19 3012510 2 Collar, Locking w/Setscrew
20 FWF063131095 2 Washer, 5/8 SAE Flat ZN
21 3007806 2 Pad, Foam .094 x 2.5 x 4
22 3007795 1 Retainer Nut Plate
23 3014094 1 Bed Rail Mount, PS
24 9240113 2 Screw, HHC, 5/16-18 x 3/4 Gr. 5, ZN
25 FWF031075006 2 Washer, 5/16 SAE, ZN
26 924701112 2 Nut, Hex Flange - 5/16-18 ZN
The following are instructions for installing the
Wintergate spreader mount. We recommend
that this product only be installed on trucks
with a step bumper. Buyers Products Company
makes no claims as to the mountability of this
product on a particular vehicle. Before beginning
the installation procedure read the instructions
thoroughly and check all parts and quantities
against the parts list.
10
12
11
WINTERGATE
4
ASSEMBLY
Fig. 2
21
25
26
24
See Fig. 2
19
15
17
5
17
7
14
23
9
18
8
PS–Passenger Side
DS–Driver Side
1.
Preparation
1.1 Park the truck on a level surface.
1.2 Installation will require two people.
1.3 Parts are referenced by the item numbers shown
in the parts list and assembly drawing (Figures 1
and 2).
16
22
20
13
6
Fig. 1
CAUTION:
■
Never swing the spreader away from the
truck with salt in the hopper
■
All retainer pins must be securely in place
when transporting and using the spreader
■
Check torque of all fasteners on a
monthly basis
2.
Stake pocket anchor installation
2.1 Mount the adhesive foam pad (21) on the
underside of each bed rail mount (4).
2.2 Assemble the retainer nut plate (22), retainer
plate (16) and bed rail mounts (4) using 3/8” hex
head screws, lock washers and flat washers as shown
2
Loading...