Salsbury Industries 7155 User Manual

Military TA-50 & Military Combination

Storage Cabinets – 7150/7155

Installation Instructions

Thank you for selecting Salsbury’s military storage cabinets. We are confident that the quality and construction of the
cabinets will prove to be a good investment.

Due to the weight of these cabinets, it is recommended that you have a forklift or other heavy-lift device available to move
them into the final installation position.

CAUTION: Due to the heavy weight of the cabinets, it is highly recommended that they be
securely anchored to the floor and/or wall.

No assembly is needed as the storage cabinets are of fully welded construction. The cabinets should be placed in the
installation location and anchored to the floor, wall, or to both. Installation fasteners are not provided, as individual job
conditions will dictate the type of anchor fasteners that should be used. The anchor fasteners chosen should be
appropriately sized for the heavy weight of the cabinets.

7150 Military TA-50 Shown

SALSBURY INDUSTRIES

1010 East 62nd Street, Los Angeles, CA 90001-1598

Phone: [phone] Int’l Phone: [phone]

Fax: [phone] Int’l Fax: [phone]

www.lockers.com engineering

Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.

Copyright © 2013 Salsbury Industries. All rights reserved. (Rev. 02, 2/19/2013)

@lockers.com