Salsbury Industries 3600C5SRU, 3600C7ZFU, 3600C7ZRP, 3600C7ZRU, 3600C7ZFP User Manual
...
Collection Units – 3600 Series
FRONT and REAR LOADING Installation Instructions
Front Loading Instructions
(See second page for rear loading instructions.)
With a rugged all aluminum construction, the Salsbury’s 3600 series
mail collection unit will provide years of maintenance free service.
The 3 front loading units in the series are sized vertically to match the
height of the most commonly installed 3600 series horizontal
mailboxes.
Notes
1. Wall opening and lumber frame must be square.
2. Collection units should be shielded from direct weather conditions.
3. Hardware is not included to install units into rough opening.
Installation Instructions
1. It is recommended that the collection unit be unpacked and
reviewed before construction of the rough opening and support
framing. The collection unit is shipped fully assembled.
2. Using standard construction framing methods, frame wall
according to the rough opening dimensions provided. For additional
support, an additional base and platform below the unit (and behind
the wall) can also be fabricated using standard framing methods.
3. Place unit in rough opening and securely fasten to the support
framing with screws through the holes provided. Caution: Do not
deform, force, or twist the frame to fit an incorrect rough
opening or against an irregular surface, as this will affect the
alignment of the assembly.
USPS Master Lock Installation
Contact your local postmaster for units serviced by the United States
Postal Service. The USPS will supply and install its own master lock
on your collection unit upon request. Studs and nuts for the USPS
master lock are provided.
SALSBURY INDUSTRIES
1010 East 62nd Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
www.mailboxes.com engineering
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2008 Salsbury Industries. All rights reserved. (Rev. 02, 2/6/2008)
@mailboxes.com
Collection Units – 3600 Series
FRONT and REAR LOADING Installation Instructions
Rear Loading Instructions
(See first page for front loading instructions.)
With a rugged all aluminum construction, the Salsbury’s 3600 series
mail collection unit will provide years of maintenance free service.
The 3 rear loading units in the series are sized vertically to match the
height of the most commonly installed 3600 series horizontal
mailboxes.
Notes
1. Wall opening and lumber frame must be square.
2. Collection units should be shielded from direct weather conditions.
3. Hardware is not included to install units into rough opening.
4. Customer to supply mail receiving receptacle for rear loading
collection units.
Installation Instructions
1. It is recommended that the collection unit be unpacked and
reviewed before construction of the rough opening and support
framing. The collection unit is shipped fully assembled.
2. Using standard construction framing methods, frame wall
according to the rough opening dimensions provided.
3. Place unit in rough opening and securely fasten to the support
framing with screws through the holes provided. Caution: Do not
deform, force, or twist the frame to fit an incorrect rough
opening or against an irregular surface, as this will affect the
alignment of the assembly.
SALSBURY INDUSTRIES
1010 East 62nd Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624-5299 Int’l Fax: 323-846-6800
www.mailboxes.com engineering
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2008 Salsbury Industries. All rights reserved. (Rev. 02, 2/6/2008)
@mailboxes.com
Loading...