Salsbury Industries 33000 User Manual

Designer Locker Options - 33000 Series

Installation Instructions

Thank you for selecting Salsbury’s options for designer lockers. These instructions are intended to assist you in assembling various optional items
onto the lockers. Locker fillers may be cut to special sizes for custom installations

Vertical In-Line Filler and Flat Top In-Line Filler

Install the vertical in-line filler by fastening it to the lockers by
installing screws from inside the lockers into the vertical filler. Install
optional 48” long cleats for greater stability by installing screws from
inside the lockers into the cleats. Install two 12” long cleats 3/4” from
the top edge of the lockers by installing screws from inside the
lockers into the cleats then install one additional cleat at the same
elevation onto the vertical in-line filler. Fasten the flat top in-line filler
to the cleats with liquid nails (or similar product). #8 x 1-1/4” screws
are provided for installation of the vertical filler and cleats.

.

Vertical In-Line Filler and Sloping Hood In-Line Filler

Install the vertical in-line filler by fastening it to the lockers by
installing screws from inside the lockers into the vertical filler. Install
optional 48” long cleats for greater stability by installing screws from
inside the lockers into the cleats. Install two 12” long cleats 3/4” from
the top edge of the sloping hoods by installing screws into the cleats
and through the sloping hoods then install one additional cleat onto
the vertical in-line filler 3/4” from its top edge. Fasten the sloping
hood in-line filler to the cleats with liquid nails (or similar product).
#8 x 1-1/4” screws are provided for installation of the vertical filler
and cleats.

SALSBURY INDUSTRIES

1010 East 62nd Street, Los Angeles, CA 90001-1598

Phone: [phone] Int’l Phone: [phone]

Fax: [phone] Int’l Fax: [phone]

www.lockers.com engineering

Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.

Copyright © 2012 Salsbury Industries. All rights reserved. 2/20/12 Page 1 of 3

@lockers.com

Designer Locker Options - 33000 Series

Installation Instructions

Vertical Corner Filler and Flat Top Corner Filler

Vertical corner fillers are comprised of a 3” and a 2” wide piece, each
72” long. Install the vertical corner filler pieces by vertically
overlapping the 3” wide piece beyond the 2” wide piece as shown in
the illustration. Fasten the pieces to the lockers by installing screws
from inside the lockers into the vertical corner fillers. Install optional
48” long cleats for greater stability by installing screws from inside
the lockers into the cleats. Install two 12” long cleats 1/4” from the
top edge of the lockers by installing screws from inside the lockers
into the cleats then install two additional cleats at the same elevation
onto the wall. Fasten the flat top corner filler to the cleats with liquid
nails (or similar product). Notch the flat top corner filler to fit behind
the vertical filler. #8 x 1-1/4” screws are provided for installation of
the vertical filler and cleats.

Vertical Corner Filler and Sloping Hood Corner Filler

Vertical corner fillers are comprised of a 3” and a 2” wide piece, each
72” long. Install the vertical corner filler pieces by vertically
overlapping the 3” wide piece beyond the 2” wide piece as shown in
the illustration. Fasten the pieces to the lockers by installing screws
from inside the lockers into the vertical corner fillers. Install optional
48” long cleats for greater stability by installing screws from inside
the lockers into the cleats. Install two 12” long cleats 3/4” from the
top edge of the sloping hoods by installing screws into the cleats and
through the sloping hoods then install two additional cleats onto the
wall to support the sloping hood corner filler. Fasten the sloping
hood corner filler to the cleats with liquid nails (or similar product). #8
x 1-1/4” screws are provided for installation of the vertical filler and
cleats.

SALSBURY INDUSTRIES

1010 East 62nd Street, Los Angeles, CA 90001-1598

Phone: [phone] Int’l Phone: [phone]

Fax: [phone] Int’l Fax: [phone]

www.lockers.com engineering

Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.

Copyright © 2012 Salsbury Industries. All rights reserved. 2/20/12 Page 2 of 3

@lockers.com