How it Works
Salora
Loading...
LCD3231DVX-II
Instruction Manual
88 pgs5.49 Mb0

Salora LCD3231DVX-II Instruction Manual

GEBRUIKSAANWIJZING
MODE D'EMPLOI
OPERATING INSTRUCTIONS
LCD3231DVX-II
KLEURENTELEVISIE MET AFSTANDSBEDIENING
TELEVISEUR COULEUR A TELECOMMANDE
COLOUR TELEVISION WITH REMOTE CONTROL
Contents
Accessories .......................................................... 60
Features ............................................................... 60
Introduction ........................................................... 60
Preparation ........................................................... 60
Safety Precautions ...............................................60
Power Source ................................................... 60
Power Cord .......................................................60
Moisture and Water ..........................................60
Cleaning............................................................61
Heat and Flames ..............................................61
Lightning ........................................................... 61
Replacement Parts ........................................... 61
Servicing ........................................................... 61
Waste Disposal .................................................61
Information for Users in European Union
Countries .......................................................... 61
Disconnecting the Device ................................. 61
Headphone Volume .......................................... 61
Installation.........................................................61
LCD Screen ...................................................... 61
Warning ............................................................61
Overview of the Remote Control ..........................62
LCD TV and Operating Buttons ............................63
Viewing the Connections- Back Connectors ........63
Viewing the Connections - Side Connectors ........ 64
Power Connection ................................................ 64
Aerial Connection ................................................. 64
Connecting the LCD TV to a PC ........................... 65
Connecting to a DVD Player................................. 65
Using Side AV Connectors ................................... 66
Connecting Other Equipment via Scart ................ 66
Inserting Batteries into the Remote Control
Handset ................................................................ 66
Switching the TV On/Off ....................................... 66
To Switch the TV On ......................................... 66
To Switch the TV Off ......................................... 66
First Time Installation............................................67
Input Selection ......................................................67
Basic Operations .................................................. 67
Operation with the Buttons on the TV ...............67
TV Menu System .................................................. 68
Picture Menu.....................................................68
Sound Menu .....................................................68
Feature Menu ...................................................69
Source Menu ....................................................72
PC Mode Menu System........................................ 72
PC Position Menu ............................................. 72
Displaying TV Information .................................... 72
Mute Function .......................................................73
Picture Mode Selection......................................... 73
Freezing Picture ...................................................73
Zoom Modes......................................................... 73
Auto .................................................................. 73
16:9 ................................................................... 73
4:3 ..................................................................... 73
Panoramic.........................................................73
14:9 ................................................................... 73
Cinema ............................................................. 73
Subtitle .............................................................. 73
Zoom.................................................................73
T eletext ................................................................. 74
Tips .......................................................................74
Image Persistence ............................................ 74
No Power .......................................................... 74
Poor Picture ...................................................... 74
No Picture ......................................................... 74
Sound ............................................................... 74
Remote Control.................................................74
Input Sources....................................................74
Appendix A: PC Input Typical Display Modes .......75
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types) .............................................. 76
Specifi cations .......................................................77
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 5903_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 59 19.03.2010 20:24:3119.03.2010 20:24:31
Accessories
INFO
SLEEP
PRESETS
SOURCE
SCREEN
RETURN
MENU
Batteries: 2 X AAA
SUBTITLE
LANG.
FAV
EPG
/
Instruction Book
Remote
Control
Features
• Remote controlled colour LCD TV.
• HDMI connector for digital video and audio. This connection is also designed to accept high defi nition signals.
•
200 programmes from VHF, UHF.
• OSD menu system.
• Scart socket for external devices (such as video, video games, audio set, etc.).
• Stereo sound syste
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5 minutes the TV switches automatically to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98,ME,2000,XP, V ista.
• Game Mode (optional)
m.
English - 60 -
Introduction
Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly.
Please do keep this manual in a safe place for future references.
Preparation
For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.
Use this device in moderate climates.
10 cm
10 cm
10 cm
Safety Precautions
Please read the following recommended safety precautions carefully for your safety.
Power Source
The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience.
Power Cord
Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause fi re or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualifi ed personnel.
Moisture and Water
Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects fi lled with liquids, such as fl ower vases, on top. Avoid from dripping or splashing.
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6003_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 60 19.03.2010 20:24:3219.03.2010 20:24:32
If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualifi ed personnel before operating it any further.
Cleaning
Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.
Ventilation
The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. T o prevent overheating, these openings must not be blocked or covered in anyway.
Heat and Flames
The set should not be placed near to open fl ames and sources of intense heat such as an electric heater. Ensure that no open fl ame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, fi re or the like.
Lightning
In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service technician has used replacement parts, which are specifi ed by the manufacturer or have the same specifi cations as the original one. Unauthorized substitutions may result in fi re, electrical shock or other hazards.
Servicing
Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.
Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household waste. Please dispose of used battery in an environment friendly manner. Find out about the legal regulations which apply in your area.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow the local laws or regulations for disposal.
Information for Users in European Union Countries
This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in EU.
For more information, please contact the local authority or the dealer where you purchased the product.
Disconnecting the Device
The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.
Headphone Volume
Excessive sound pressure from earphones and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).
LCD Screen
The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally, a few non-active pixels may appear on the screen as a fi xed blue, green or red point. Please note that this does not affect the performance of your product.
Warning
Do not leave your TV in standby or operating mode when you leave your house.
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6103_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 61 19.03.2010 20:24:3319.03.2010 20:24:33
Overview of the Remote Control
Standby1. Image size2.
INFO
Sleep timer3.
SLEEP
Numeric buttons4.
SCREEN
SOURCE
PRESETS
Return / TXT Index5. Cursor up / TXT up page6. Cursor left 7. Programme up8. Programme down9. Mono-Stereo / Dual I-II10.
RETURN
MENU
Swap11. No function12. Info / TXT reveal13. Picture mode selection14. Source selection15. Red / Sound 16. Green / Picture 17. Yellow / Feature18. Menu19. Blue / Install 20.
29
FAV
OK /Select21. Cursor righ / TXT Subpage22.
LANG.
EPG
SUBTITLE
/
28
Cursor down / TXT Downpage23. Volume up24. Volume down 25.
30
Mute26. Teletext / Mix27. TXT Subtitle28. No function29. Media Player buttons 30.
Note: Buttons that are not indicated with a number on the remote control illustration are not functional in TV mode. Remote range is approximately 7m/23ft
English - 62 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6203_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 62 19.03.2010 20:24:3319.03.2010 20:24:33
LCD TV and Operating Buttons
FRONT and REAR VIEW SIDE VIEW Control Buttons
Standby button1. TV/AV button2. Programme Up/Down 3.
buttons Volume Up/Down buttons4.
Note: Press V+/V- buttons at the same time to view main menu.
Viewing the Connections- Back Connectors
SCART socket inputs or outputs for external devices.1. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
PC Input is for connecting a personal computer to the TV set. 2.
SPDIF
Coax.OUT
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Please do not connect a device to YPbPr socket while using PC input.
S/PDIF Coaxial Out3. outputs digital audio signals of the currently watched source.
RF Input connects to an antenna or a cable.4. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
5. HDMI 2: HDMI input HDMI6. 1: HDMI input
HDMI Input is for connecting a device that has an HDMI socket. Your LCD Television is capable of displaying High Defi nition pictures from devices such as a High Defi nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p signals. No sound connection is needed for an HDMI to HDMI connection.
VGA
HDMI 2
SCART
HDMI 1
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6303_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 63 19.03.2010 20:24:3419.03.2010 20:24:34
Viewing the Connections - Side Connectors
Component Video Inputs (YPbPr)1. are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output. Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and the component video outputs of your device. While connecting, be sure that the letters on your TV, “ Y ”, “ Pb ”, “ Pr ” correspond with your device’s connectors.
IMPORTANT:Please do not connect a device to PC socket while using YPbPr input.
Video Input is used for connecting video signals of external devices.Connect 2. the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device.
Audio Inputs are used for connecting audio signals of external devices. 3. Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT jacks on your device. Also to enable PC/YPbPr sound connection in such a case, use an appropriate audio cable between the connected device’s audio outputs and the TV’s audio inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.
Headphone jack is used for connecting an external headphone to the system. Connect to the 4. HEADPHONE jack to listen to the TV from headphones.
Power Connection
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
HDMI 1
HDMI 2
SPDIF
Coax.OUT
VGA
SCART
English - 64 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6403_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 64 19.03.2010 20:24:3519.03.2010 20:24:35
Connecting the LCD TV to a PC
For displaying your computer ’s screen image on your LCD TV, you can connect your computer to the TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC
to the LCD TV.Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection.
• When the connection is made, switch to PC source.
See “Input selection” section.
• Set the resolution that suits your viewing requirements.
Resolution information can be found in the appendix parts.
HDMI 1
HDMI 2
SPDIF
Coax.OUT
VGA
SCART
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video cable to connect video input. T o enable sound connection, use AUDIO IN located side of the TV (YPbPr cable is not supplied).
• When the connection is made, switch to YPbPr source. See, “Input selection” section.
• You may also connect through the SCART socket. Use a SCART cable as shown below.
PC audio cable
(not supplied)
to AUDIO INPUTS
on the TV
Audio Inputs
PC Input
PC RGB cable (not supplied) to PC input
Scart socket
Note : These methods of connection perform the same function but in different levels of quality. It is not necessary
to connect by all three methods.
Component
video
inputs
Component
audio inputs
DVD Player
HDMI
input
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6503_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 65 19.03.2010 20:24:3519.03.2010 20:24:35
Using Side AV Connectors
Scart socket
Decoder
DVD Recorder
Video Recorder
You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied.
• For connecting a camcorder , connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts.
• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV
Camcorder
Headphone
Inserting Batteries into the Remote Control Handset
• Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.
• Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover.
Connecting Other Equipment via Scart
Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.
For more information, refer to your device’s own instruction book.
Note : Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be
damaged due to any leakage of batteries.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC, 50 Hz.
• Press STANDBY switch. Then the standby LED lights up.
• To switch on the TV from standby mode either:
• Press the “ on the remote control.
• Press the -P/CH or P/CH+ button on the TV. The TV will then switch on.
Note: If you switch on your TV via standby button on the remote control, the programme/source that you were watching last will be reselected.
By either method the TV will switch on.
To Switch the TV Off
• Press the “ ” button on the remote control or press the STANDBY switch, so the TV will switch to standby mode.
• To power down the TV completely, unplug the power cord from the mains socket.
” button, P+ / P- or a numeric button
English - 66 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6603_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 66 19.03.2010 20:24:3619.03.2010 20:24:36
First Time Installation
When the TV set is operated for the fi rst time, the following menu screen will be displayed:
Select your Country, Language and Text language by using “ ” or “ ” and “ ” or “ ” buttons. Press OK or RED button to continue. To cancel, press the BLUE button.
The following menu will be displayed during the automatic tuning:
After APS is fi nalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes.
If you do not accept the locations and/or the programme names, you can change them via the program table.
Do not turn off the TV while initializing fi rst time installation.
Input Selection
Once you have connected external systems to your TV, you can switch to different input sources.
• Press “SOURCE” button on your remote control for directly changing sources.
or
• Select “Source” option from the main menu by using “ ” or “ ” button. Use then “ ” or “ ” button to highlight an input and press “ ” button to select.
Note : You can mark desired source options by pressing the OK button. Therefore, when
only the marked source options will be available (except for the TV source).
“SOURCE” button is pressed,
Basic Operations
You can operate your TV using both the remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “ ” button to decrease volume or “ ” button to increase volume, so a volume level scale (slider) will be displayed on the screen.
Programme Selection
• Press “ P/CH + ” button to select the next programme or “ P/CH - ” button to select the previous programme.
Viewing Main Menu
• Press V+/V- buttons at the same time to view main menu. In the Main menu select sub-menu using “ P/CH - ” or “ P/CH + ” buttons and enter the sub- menu using “ the usage of the menus, refer to the menu system sections.
AV Mode
• Press the “ TV/AV ” button in the control panel on the TV to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.
• Functions of the menu system are described in the following sections.
Volume Setting
• Press “V+” button to increase the volume. Press “V-” button to decrease the volume. A volume level scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next Programme)
• Press “ P - ” button to select the previous programme.
• Press “ P + ” button to select the next programme.
” or “ ” buttons. To learn
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6703_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 67 19.03.2010 20:24:3619.03.2010 20:24:36
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10-199, press the numeric buttons consecutively
• Press directly the programme number to reselect single digit programmes.
TV Menu System
Picture Menu
Mode
For your viewing requirements, you can set the related mode option.
Press “ ” or “ ” button to choose from one of these options: Cinema , Dynamic and Natural .
Brightness/Contrast/Colour/Sharpness/ Hue
Press “ ” or “ ” button to select the desired option. Press “ ” or “ ” button to set the level.
Note : Hue option can only be visible when the TV receives an NTSC signal.
Colour Temp
Press “ ” or “ ” button to select Colour T emp . Press “ ” or “ ” to choose from one of these options: Cool , Normal and Warm .
Note :
• Setting Cool option gives white colours a slight blue
stress.
• Setting Warm option gives white colours a slight red
stress.
• For normal colours, select Normal option.
” or “ ” button to select Mode . Press “
Noise Reduction
If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount.
Press “ Press “ ” or “ ” to choose from one of these options: Low , Medium , High or Off .
” or “ ” button to select Noise Reduction.
Game Mode (optional)
Select Game Mode by pressing “ ” or “ ” button. Use “ ” or “ ” button to set Game Mode as On or Off . When Game Mode is set to On, specifi c game mode settings, which are optimized for better video quality, will be loaded.
Also; Picture Mode, Contrast, Brightness, Sharpness, Colour and Colour Temp settings will be invisible and disabled while Game Mode is on.
Note : Picture mode selection button on the remote control will have
no function while Game Mode is on.
Picture Zoom
Select Picture Zoom by pressing “ ” or “ ” button.
” or “ ” buttons, to change picture zoom to
Use “ Auto , 16:9 , 4:3 , Panoramic , 14:9 , Cinema , Subtitle or Zoom .
Store
Press “ ” or “ ” button to select Store. Press “ ” or OK button to store the settings. “ Stored... ” will be displayed on the screen.
Reset
Press “ ” or “ ” button to select Reset . Press “ ” or “ ” or OK button to reset the picture modes to factory default settings.
Sound Menu
Volume
Press “ ” or “ ” button to select Volume . Press “ ” or “
” button to change the level of the Volume.
English - 68 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6803_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 68 19.03.2010 20:24:3719.03.2010 20:24:37
Equalizer
Press “ ” or “ ” button to select Equalizer . Press “
” button to view equalizer menu.
Press “ ” or “ ” button to change the preset. In equalizer menu, the preset can be changed to Music , Movie , Speech , Flat , Classic and User .
Select the desired frequency by pressing “ button and increase or decrease the frequency gain by pressing “
Press the “ M ” button to return to the previous menu.
Note : Equalizer menu settings can be changed only when the Equalizer Mode is in User .
” or “ ” button.
” or “ ”
Balance
This setting is used for emphasizing left or right speaker balance.
Press “ Balance level can be adjusted between -32 and +
32.
” or “ ” button to select Balance. Press “
” or “ ” button to change the level of the balance.
Headphone
Press “ ” or “ ” button to select Headphone . Press “ ” button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press “ ” or “ ” button to select Volume . Press “ ” button to increase headphone volume level. Press “ ” button to decrease headphone volume level. Headphone volume level can be adjusted between 0 and 63 .
Sound Mode
Press “ ” or “ ” button to select Sound Mode . Using “ ” or “ ” button, you can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the sound to obtain fi xed output level between programmes
(For instance, volume level of advertisements tend to be louder than programmes).
Press “ “
” or “ ” button to select AVL . Press “ ” or
” button to set the AVL as On or Off .
Store
Press “ ” or “ ” button to select Store. Press “ ” or OK button to store the settings. “ Stored... ” will be displayed on the screen.
Feature Menu
Sleep Timer
Press “ ” or “ ” button to select Sleep Timer . Use “ ” or “ ” button to set the Sleep Timer.
The timer can be programmed between Off and 120 minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected time, the TV goes automatically to standby mode.
Child Lock
Press “ ” or “ ” button to select Child Lock . Use “
” or “ ” button to set the Child Lock On or Off . When On is selected, the TV can only be controlled by the remote control handset. In this case the control panel buttons will not work.
Hence, if one of those buttons is pressed, Child Lock On will be displayed on the screen when the menu screen is not visible.
Language
Press “ ” or “ ” button to select Language . Use “ ” or “ ” button to select the Language .
Default Zoom
While zoom mode is set as AUTO , the TV will set the zoom mode in accordance with the signal of the broadcast. If there is no WSS or aspect ratio information, the TV will then use this setting to adopt. Press “ can set Default Zoom to Panoramic , 16:9 , 4:3 or 14:9 by pressing “
” or “ ” button to select Default Zoom . You
” or “ ” button.
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 6903_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 69 19.03.2010 20:24:3719.03.2010 20:24:37
Blue Background
If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On .
By pressing “
Background . Press “ ” or “ ” button to set Blue Background as On or Off .
” or “ ” button, select Blue
Menu Background
Press “ ” or “ ” button to select Menu Background . You can set menu background level by pressing “ ” or “ ” button.
Backlight
This setting controls the backlight level. Select Backlight by pressing “ ” or “ ” button. Press“ ” or “ ” button to set Backlight to Auto, Medium , Maximum or Minimum .
Menu Timeout
To set a specifi c display timeout for menu screens, set a value for this option.
Press “ “ ” or “ ” button to change menu timeout to 15 sec , 30 sec or 60 sec .
” or “ ” button to select Menu Timeout . Use
Teletext Language
Press “ ” or “ ” button to select T eletext Language . Use “ ” or “ ” button to change T eletext Language to West, East , Turk/Gre , Cyrillic, Arabic or Persian .
HDMI PC Full Mode (optional)
If you want to view PC screen in HDMI mode by using external connection, HDMI PC FULL MODE option should be On to adjust the screen ratio correctly. This item might be inactive in some resolutions.
Note: If you connect an HDMI device and switch the TV to HDMI mode, this feature will be visible (except for 1080i/1080P resolution).
Full Mode (optional)
If you connect a device via HDMI or YPbPr connectors and set 1080i/1080P resolutions, Full Mode item will be visible.You can set Full Mode as 1:1 or Normal by using “ ” or “ ”.If you select 1:1, screen ratio will be adjusted correctly. If you set Normal, screen ratio may expand.
Ext Out
Press “ ” or “ ” button to select Ext Out. Use “ ” or
” button to set the Ext Out as On or Off.
“
Note : For copying from a DVD or VCR device, you should choose
desired source from source menu and turn “On” to EXT Out from feature menu.
Install Menu
Program
Press “ ” or “ ” button to select Program. Use “ ” or “
” button to select the program number. You can also enter a number using the numeric buttons on the remote control. There are 200 programme storage between 0 and 199.
Band
Band can be selected either C or S. Press “ ” or “ ” button to set Band.
Channel
Channel can be changed by “ ” or “ ” button or numeric buttons.
Colour System
Press “ ” or “ ” button to select Colour System. Use “ ” or “ ” button to change the colour system to PAL, PAL 60, SECAM or AUTO.
Sound System
Press “ ” or “ ” button to select Sound System. Press “ ” or “ ” button to change the sound system to BG,DK, I, L or L’.
Fine Tune
Press “ ” or “ ” button to select Fine Tune. Press “ ” or “ ” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “ ” or “
” button to start programme searching. You can also enter the desired frequency using the numeric buttons while Search item is highlighted.
Store
Press “ ” or “ ” button to select Store. Press “ ” or OK button to store the settings. “ Stored... ” will be displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install menu when the TV is in AV modes. Note that limited options will be available. Switch to TV mode for viewing complete version of the Install menu.
English - 70 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7003_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 70 19.03.2010 20:24:3819.03.2010 20:24:38
Colour System
Press “ ” or “ ” button to select Colour System . Use “
” or “ ” button to change the colour system to PAL,
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press “ ” or “ ” button to select Store Program . Press “ ” or “OK” button to store the settings. “ Stored... ” will be displayed on the screen.
Program Table
Select Program T able by pressing “ ” or “ ” button. Press “ ” to display Program Table:
Move
Select the programme which you want to move by navigation buttons. Press the GREEN button. By navigation buttons move the selected programme to the decided programme space and press the GREEN button again.
Delete
To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the selected programme from the programme list, and the following programmes shift one line up.
APS (Auto Programming System)
When you press the BLUE button for starting automatic tuning, Auto Programming System menu will appear on the screen:
Press “ ” or “ ” button to select your country. If you want to exit from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting automatic tuning, all stored programmes will be erased and the TV will search for available channels. During the search, the following OSD will be displayed:
By moving the cursor in four directions you can reach 20 programmes in the same page. Y ou can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except for the AV modes). By cursor action, programme selection is done automatically.
Whenever you press the BLUE button, APS function stops and Program Table appears on the screen.
If you wait until the end of APS, Program Table will be displayed with the programmes found and located.
Name
To change the name of a programme, select the programme and press the RED button.
The fi rst letter of the selected name will be highlighted. Press “ or “ the RED button, you can store the name.
” or “ ” button to change that letter and “ ”
” button to select the other letters. By pressing
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7103_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 71 19.03.2010 20:24:3919.03.2010 20:24:39
Source Menu
Press “ ” or “ ” button and select the sixth icon. Then press “ ” or “OK” button. Source menu appears on the screen:
In source menu, highlight a source by pressing “ ” or “ ” button and switch to that mode by pressing “
” button. Source options are; TV , DVD,EXT-1 , FAV ,
HDMI-1, HDMI-2 , YPbPr and PC-VGA .
Note : Once you have connected optional equipment systems to your TV, you should select the required input to view pictures from that source.
PC Mode Menu System
See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set.
For switching to PC source, press “SOURCE” button on your remote control and select PC input. You can also use “Source” menu to switch to PC mode.
Note that PC mode menu settings are available only while the TV is in PC source.
PC Position Menu
Select the first icon by pressing “ ” or “ ” button. PC Position menu appears on the screen:
Autoposition
If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically. This setting therefore automatically optimizes the display.
Select Autoposition item by using “ Press “OK” or “ ”, “ ” button.
Warning : Please ensure auto adjustment is performed with a full screen image to ensure best results.
” or “ ” buttons.
H (Horizontal) Position
This item shifts the image horizontally to right hand side or left hand side of the screen.
Select H Position item by using “ Use “ ” or “ ” button to adjust the value.
” or “ ” button.
V (Vertical) Position
This item shifts the image vertically towards the top or bottom of the screen.
Select V Position item by using “ Use “ ” or “ ” button to adjust the value.
” or “ ” button.
Phase
Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
Select Phase item by using “ “ ” or “ ” button to adjust the value.
” or “ ” buttons. Use
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Select Dot Clock item by using “ Use “ ” or “ ” button to adjust the value.
” or “ ” buttons.
PC Picture Menu
For adjusting PC picture items, do the following: Press “
Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour Temperature settings in this menu are identical to
settings defi ned in TV picture menu under “Analogue TV Menu System”.
Note : If you set Colour Temp as User, you can defi ne R, G, B settings manually.
Sound,Feature and Source settings are identical to the settings explained in Analog Tv menu system.
” or “ ” button to select the second icon. PC
Displaying TV Information
Programme Number , Programme Name , Sound
English - 72 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7203_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 72 19.03.2010 20:24:3919.03.2010 20:24:39
Indicator and Zoom Mode information is displayed on the screen when a new programme is entered or “INFO” button is pressed.
Mute Function
Press “ ” button to disable sound. Mute indicator will be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the fi rst one is pressing the “ is increasing the volume level.
” button and the second one
use the 16:9 mode to restore the picture to its original shape.
4:3
Use to view a normal picture (4:3 aspect ratio) as this is its original size
Picture Mode Selection
By pressing PRESETS button, you can change Picture Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural and Cinema.
Note: This feature cannot be set while in PC mode.
Freezing Picture
You can freeze the picture on the screen by pressing the “ OK ” button on the remote control. Press the “ OK ” button to freeze picture. Press again to quit freeze mode.
Note: This feature will not be available while in PC mode or watched movie from DVI source .
Zoom Modes
You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes.
Press SCREEN button to directly change the zoom mode.
Available zoom modes are listed below.
Note: In YPbPr and HDMI modes, while in 720p-1080i resolutions,
only 16:9 mode is available. Zoom mode cannot be changed while in PC mode.
Auto
When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal.
• When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually.
16:9
This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fi ll the wide TV screen
.
Panoramic
This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fi ll the screen, without making the picture appear unnatural. The top and bottom of the picture are slightly cut off.
14:9
This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.
Cinema
This zooms up the wide picture (16:9 aspect ratio) to the full screen.
Subtitle
This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.
Zoom
This option zooms to the picture.Note: You can shift to screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as panaromic, 14:9, Cinema or Subtitle.
.
• For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio),
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7303_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 73 19.03.2010 20:24:4019.03.2010 20:24:40
Teletext
Teletext system is available if your broadcaster supports
Teletext function buttons are listed below:
“ ” Teletext / Mix / PAT Mode
Activates teletext mode when pressed once. Press again to place the teletext screen over the
programme (mix). Pressing this button again will split the screen into two windows, one displaying the teletext and the other displaying the current channel. Pressing again will quit the teletext mode.
“RETURN” - Index
Selects the teletext index page.
“ ” Subcode Pages
Selects subcode pages if available when the teletext is activated.
“INFO” - Reveal
Shows hidden information (e.g. solutions of games).
“SCREEN” - Expand
Press once to enlarge top half of the page, press again to enlarge the bottom half of the page. Press again to revert back to normal size.
P+ / P- and numbers (0-9)
Press to select a page.
Note : Most TV stations use code 100 for their index pages.
Coloured Buttons
You can use coloured buttons in accordance with the displayed functions. When TOP text system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button that corresponds to with your needs. The coloured writings will appear, showing you which coloured buttons to use when FASTEXT transmission is present.
Teletext Subtitle
If you press “SUBTITLE” button, teletext subtitle information will be displayed on the bottom right part of the screen (if available). You can set the desired option by highlighting it using “ ” or “ ” button and then by pressing OK button.
Tips
Image Persistence
Please note that ghosting may occur while displaying a persistent image. LCD TVs’ image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture for extended periods.
No Power
If your TV system has no power, please check the main power cable and connection to the mains socket outlet.
Poor Picture
Have you selected the correct TV system? Is your TV set or house aerial located too close to a non-earthed audio equipment or neon lights, etc.?
Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. Please retune the channels. The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.
Sound
You can not hear any sound. Did you perhaps interrupt the sound, pressing the “ ” button?
Sound is coming from only one of the speakers. Is the balance set to one extreme? See Sound Menu .
Remote Control
Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV.
Input Sources
If you cannot select an input source, it is possible that no device is connected.
Check the A V cables and connections if you have tried to connect a device.
English - 74 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7403_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 74 19.03.2010 20:24:4019.03.2010 20:24:40
Appendix A: PC Input Typical Display Modes
The display has a maximum resolution of 1600 X 1200 . The following table is an illustration of some of the typical video display modes.
Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Resolution Frequency
Index
1 640 480 60 31.5 VESA 2 640 480 72 37.9 VESA 3 640 480 75 37.5 VESA 4 800 600 56 35.2 VESA 5 800 600 60 37.9 VESA 6 800 600 70 43.8 7 800 600 72 48.1 VESA 8 800 600 75 46.9 VESA
9 832 624 75 49.7 MAC 10 1024 768 60 48.4 VESA 11 1024 768 70 56.5 VESA 12 1024 768 72 57.7 13 1024 768 75 60.0 14 1152 864 70 64.2 VESA 15 1152 864 75 67.5 VESA 16 1152 870 75 68.9 MAC 17 1280 768 60 47.7 VESA 18 1360 768 60 47.7 19 1280 960 60 60.0 VESA 20 1280 1024 60 64.0 VESA 21 1280 1024 75 80.0 VESA 22 1600 1200 60 75.0 VESA
Hor Ver Ver (Hz)
(KHz)
Hor
Standard
Information for Users on Disposal of old Equipment and Batteries
[European Union only] These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.
Battery
Notice: The sign Pb below the symbol for batteries indicates that this battery
contains lead.
Products
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7503_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 75 19.03.2010 20:24:4019.03.2010 20:24:40
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types)
Source Supported Signals Available
PAL 50/60 O
EXT-1
(SCART)
FAV
YPbPr
HDMI1 HDMI2
(X: Not Available, O: Available)
Note : In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.
NTSC 60 O
RGB 50 O RGB 60 O
PAL 50/60 O
NTSC 60 O
480I 60Hz O
480P 60Hz O
576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O
1080I 50Hz O
1080I 60Hz O 1080P 50Hz O 1080P 60Hz O
480I 60Hz O
480P 60Hz O
576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O
1080I 50Hz O
1080I 60Hz O 1080P 24Hz O 1080P 25Hz O 1080P 30HZ O 1080P 50HZ O 1080P 60HZ O
English - 76 -
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7603_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 76 19.03.2010 20:24:4019.03.2010 20:24:40
Specifi cations
TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III)
UHF (BAND U) HYPERBAND
NUMBER OF PRESET CHANNELS
200
CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz. AUDIO German+ Nicam Stereo AUDIO OUTPUT POWER (W
) (10% THD) 2 x 6
RMS.
POWER CONSUMPTION (W) 150 W (max)
< 1 W (Standby)
PANEL 32” wide display DIMENSIONS (mm)
DxLxH (With foot): 212 x 776 x 567 Weight (Kg): 12,3 DxLxH (Without foot): 94x 776 x 524 Weight (Kg): 11,6
03_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 7703_[GB]_(01_TV)_MB45M_32883W_1900UK_ANALOG_NICKEL13_10067858_50165431.indd 77 19.03.2010 20:24:4019.03.2010 20:24:40
Contents
Features ............................................................... 78
General Properties............................................78
Safety Information ................................................79
Notes on Discs .....................................................79
On handling discs ............................................. 79
On cleaning.......................................................79
Licence Notifi cation ..............................................79
How to Watch a DVD ............................................ 79
DVD Control Panel Buttons .................................. 80
Overview of the Remote Control ..........................80
General Operation ................................................ 81
General Playback ................................................. 82
Basic Play ......................................................... 82
For your reference: .......................................82
Notes on Playback: ...........................................82
Setup Menu Items ................................................82
Vıdeo Setup Page.............................................82
TV Type ......................................................... 82
DivX VOD .....................................................82
Language Setup ...............................................82
OSD LANG ...................................................82
AUDIO .......................................................... 82
DISC MENU ..................................................82
SUBTITLE ..................................................... 82
Preferences ...................................................... 83
DEFAUL T ...................................................... 83
DOWNMIX .................................................... 83
PASSWORD (Change Password): ............... 83
Troubleshooting ....................................................83
The picture quality is poor (DVD)......................83
Disc does not play ............................................83
Wrong OSD language ....................................... 83
Some functions (Angle, Zoom etc) do not
work .................................................................. 83
No picture .........................................................83
No sound ..........................................................83
Distorted sound.................................................83
No response from remote control ..................... 84
If nothing works.................................................84
Defi nition of Terms ................................................ 84
Disc Types Compatible with This Unit ..................85
Supported File Formats ........................................ 86
Specifi cations .......................................................86
Features
General Properties
• DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG / DivX playback.
• NTSC/PAL playback (according to disc content)
• LPCM audio via coaxial digital audio output. (optional)
• Multi-Audio (up to 8) support (According to disc content)
• Multi-Subtitle (up to 32) support (According to disc content)
• Multi-Angle (up to 9) support (According to disc content)
• 8 level parental control
• Fast forward and rewind in 5 different speeds. (2x, 4x, 8x, 16x, 32x)
• Slow motion playback in 4 different speeds. (1/2x, 1/4x, 1/8x, 1/16x forward)
• Frame by frame forward playback.
• Search Mode
• Repeat
• Coaxial audio output (optional)
• Copied disks may be incompatible.
Note
• This DVD player may not support some MP3 recordings due to differences in recording formats or disc type.
• Please read the owner’s manual about MP3 playback.
• CD-R/CD-RW discs recorded by CD-DA method can be played. Some CD-R/CD-RW discs may be incompatible due to laser pick-up and disc design.
• DVD-R/RW discs recorded by DVD-Video method can be played . Some DVD-R/RW discs may be incompatible due to laser pick-up and disc design.
• Some discs may be incompatible with JPEG Viewer function due to different recording format or
condition of the discs.
03_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 7803_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 78 19.03.2010 20:25:2619.03.2010 20:25:26
Safety Information
CAUTION
DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed.
CLASS 1
LASER PRODUCT
• Manufactured under license from Dolby Laboratories. “Dolby”, and the double-D symbol are trademarks of Dolby Laboratories.
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Notes on Discs
On handling discs
• To keep the disc clean, handle the disc by its edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• If the disc is contaminated with any substance like glue remove before using it.
On cleaning
• Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
• Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
Licence Notifi cation
• This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
How to Watch a DVD
When placing a disc into the loader, labeled side of the disc should be on the front:
When TV set is turned on, fi rst switch to DVD source by using the SOURCE button on the remote control. Press play on the remote control, or directly press play
• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature can rise quickly and damage the disc.
• After playing, store the disc in its case.
button at the front panel. If there is no disc inside the loader, place a DVD fi rst and press play.
03_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 7903_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 79 19.03.2010 20:25:2719.03.2010 20:25:27
DVD Control Panel Buttons
A. Disc loader B. Play / Pause
Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc.
C. Stop / Eject
Stop playing disc / Eject or Load the disc Note:
• You cannot eject the disc via the remote control.
• While playing a fi le, you should press STOP button three times to eject.
Overview of the Remote Control
Standby1. Numeric buttons2. Return back3. Language selection (Set language)4. Display time / DVD menu5. Clear6. Stop7. No function8. Rapid Reverse9. Rapid advance10. Info11. Zoom12. Repeat13. Root14. Menu15. Title16. OK / Select17. Navigation Buttons18. Subtitle19. Angle20. Search mode21. Play22. Pause23. Skip next24. Skip previous25.
SLEEP
RETURN
FAV
SCREEN
LANG.
EPG
INFO
SOURCE
MENU
SUBTITLE
/
PRESETS
English - 80 -
03_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 8003_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 80 19.03.2010 20:25:2719.03.2010 20:25:27
/
e/f
/
/
General Operation
You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons.
Buttons on the Remote Control
ANGLE
C Clears digit (if available).
DISPLAY
INFO Time counter mode selection (during playback). Press repeatedly to switch
LANG. Audio language. X X MENU
OK / SELECT Enter / View / Play
REPEAT RETURN
ROOT
SEARCH MODE (*)
SUBTITLE Subtitle on-off. Press repeatedly to switch
SWAP
TITLE
ZOOM Zooms picture. Press repeatedly to switch between zoom options.
DVD
Playback
Play Play Play Play
Pause Pause Pause Pause
Stop Stop Stop Stop Skip
backward/forward
Shifts the zoomed picture left or right (if available).
Highlights a menu item. / Shifts the zoomed picture up or down (if available).
Views the scene from different angles (if
available).
Returns back to the previous menu (if available).
Goes back to the root folder (if available).
Direct selection of scenes or time.
between subtitle options.
Displays disc menu
(if available).
Movie
Playback
Skip
backward/forward
Rapid advance / Rapid reverse
Displays time / Views main setup menu
between modes.
Displays TV menu.
Displays repeat options.
Media source selection.
Displays disc menu
(if available).
Picture
Playback
Previous / Next Previous / Next
Changes slide
effect (depends
on the
content).
Selects the desired file.
X X
X X
Music
Playback
X
Selects the desired file.
Other Functions – Button Combinations
+
[+ ] + 
+   +   +
+
(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to switch one digit titles (example: to select 5, press 0 and 5.
(During playback)
Slow forward. Sets slow forward speed.
Sets rapid advance speed. Sets rapid reverse speed. Confirms stop command. Press repeatedly to advance manually.
03_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 8103_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 81 19.03.2010 20:25:2819.03.2010 20:25:28
General Playback
Basic Play
Press on the power button1. Please insert a disc to the loader.2.
The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it.
A menu may appear on the TV screen after a few moments or the fi lm may start immediately after the introduction of the Film Company. This behaviour depends on the disc content and may change.
Note: Step 3 and 4 is available only when a menu is recorded on the disc.
Press “3. (s) to select the preferred title.
Press SELECT.4.
Play of the selected items now starts.The played item may be a motion picture, a still picture or another submenu depending on the disc.
For your reference:
If an action corresponding to a button is prohibited the “
” symbol appears.
Notes on Playback:
No sound will be heard during Rapid advance 1. or Rapid reverse.
No sound will be heard during Slow motion play.2. Reverse slow motion play is not available.3. In some cases, the subtitle language is not 4.
changed immediately to the selected one. When the preferred language is not selected even 5.
after pressing the button several times, it means that the language is not available on the disc.
When the player is restarted or the disc is 6. changed, the subtitle selection is automatically changed back to the initial settings.
If a language is selected, not supported by the 7. disc, the subtitle language will automatically be set to the disc’s priority language.
Usually a circulation will happen while switching 8. to another language, that is you can cancel the subtitle by pressing this button a number of times until “Subtitle Off” appears on the screen.
When the power is turned on or the disc is 9. removed, the language heard is the one selected at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard.
Some DVDs may not contain root and/or title 10. menus.
” / “ ” / / or the number button
Reverse stepping is not available.11. For your convenience:12.
If you attempt to enter a number greater than the total time of the current title, the time search box disappears
and “ corner of screen.
Input Invalid” message appears on up-left
Slide Show is disabled when the ZOOM mode 13. is on.
Setup Menu Items
Vıdeo Setup Page
TV Type
TV Type is only available as ‘PAL’. The TV set also supports NTSC signal; however, the signal will be converted to PAL when it appears on the screen.
DivX VOD
DivX VOD provides the convenience of streaming video in terms of quality and performance.
Language Setup
OSD LANG
You can select the default OSD language of the player menus
AUDIO
Y ou can select the default audio language if supported by the DVD disc.
DISC MENU
Y ou can select the DVD’s disc menu language among these languages. Disc menu appears in the selected language, if supported by the DVD disc.
SUBTITLE
You can select the default subtitle language if supported by the DVD disc.
03_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 8203_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 82 19.03.2010 20:25:2819.03.2010 20:25:28
Preferences
DEFAULT
If you choose RESET and press SELECT , the factory­presets are loaded. Parental level and parental password does not change.
DOWNMIX
This mode can be selected when the digital audio output of the TV is used.
SURROUND: Surround sound output. STEREO: Two channels stereo. PARENTAL (Parental Level)
Playing some DVDs can be limited depending on the age of users. The “Parental Control” function allows playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight levels. Level “8 ADUL T” adjustment let you watch all of the DVD titles ignoring the DVD disc’s parental level. Y ou can watch the DVD discs, which has the same or lower parental level than the player’s level only.
PASSWORD (Change Password):
Using this item you can change the current password.
To change the password you will be prompted to enter your old password. After you have entered your old password, you can now enter the new 4-digit password.
You can use C key to delete the incorrect entry.
Note: Factory preset of the password is “0000”. You have to enter XXXX digital password every time you want to change the parental level. If you forget your password please contact technical service.
Troubleshooting
The picture quality is poor (DVD)
• Make sure the DVD disc surface is not damaged. (Scratch, fi ngerprint etc.)
• Clean the DVD disc and try again.
See instructions described in “Notes on Discs” to clean your disc properly.
• Ensure that the DVD disc is in the drawer with the label uppermost.
• A damp DVD disc or condensation may effect the equipment. Wait for 1 to 2 hours in Stand-by to dry the equipment.
Disc does not play
• No disc in the machine.
Place a disc into the loader.
• Disc incorrectly loaded.
Ensure that the DVD disc is in the drawer with the label uppermost.
• Wrong type of disc. The machine cannot play CD­ROMS etc.
• The region code of the DVD must match the player.
Wrong OSD language
• Select the language in the set-up menu.
• The language for the sound or subtitles on a DVD cannot be changed.
• Multilingual sound and/or subtitles not recorded on the DVD.
• Try to change the sound or subtitles using DVD’s title menu. Some DVD’s do not allow the user to change these settings without using the disc’s menu
Some functions (Angle, Zoom etc) do not work
• These functions are not available on the DVD.
• Angle can only be changed when the angle symbol is displayed.
No picture
• Have you pressed the correct buttons on the remote control? Try once more.
No sound
• Check the volume is set to an audible level.
• Make sure you have not switched the sound off accidentally.
Distorted sound
• Check that the appropriate listening mode setting is correct.
03_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 8303_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 83 19.03.2010 20:25:2919.03.2010 20:25:29
No response from remote control
• Make sure the remote control is in the correct mode.
• Check batteries are fi tted correctly .
• Change the batteries.
If nothing works
If you have tried the above solutions and none seem to work, try switching your TV-DVD of f and on again. If this does not work, contact your supplier or TV-DVD repair technician. Never attempt to repair a defective TV-DVD yourself.
Defi nition of Terms
Angle
Recorded onto some DVD discs are scenes, which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles.
Chapter Number
These numbers are recorded on DVD discs. A title is subdivided into many sections, each of which are numbered, and specifi c parts of video presentations can be searched quickly using these numbers.
DVD
This refers to a high-density optical disc on which high-quality pictures and sound have been recorded by means of digital signals. Incorporating a new video compression technology (MPEG II) and high-density recording technology. DVD enables aesthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded).
DVD has a structure consisting of two 0.6-mm thin discs, which are adhered to each other. Since the thinner the disc, the higher the density at which the information can be recorded, a DVD disc has a greater capacity than a single 1.2 mm thick disc. Since the two thin discs are adhered to each other, there is the potential to achieve double-sided play sometime in the future for even longer duration play.
Subtitles
These are printed lines appearing at the bottom of the screen, which translate or transcribe the dialogue. They are recorded on the DVD discs.
Time Number
This indicates the playtime, which has elapsed from the start of a disc or a title. It can be used to fi nd a specifi c scene quickly. (Not all discs permit the time search feature to be used. Availability is determined by the disc’s manufacturer.)
Title Number
These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as title 1, title 2, etc.
Track Number
These numbers are assigned to the tracks, which are recorded on AudioCDs. They enable specifi c tracks to be located quickly.
LPCM
LPCM stands for Pulse Code Modulation and is digital audio.
MPEG
Short for Moving Picture Experts Group. This is an international standard for compression of moving images. On some DVDs digital audio has been compressed and recorded in this format.
DivX
DivX is a digital video compression technology based on MPEG-4 and developed by DivX Networks Inc.
03_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 8403_[GB]_(02_DVD)_MB45M_WDIVX_1900UK_10067858_50165431.indd 84 19.03.2010 20:25:2919.03.2010 20:25:29
Loading...
+ 61 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use