Salora LCD1941DVX, LCD1941DVXWH, LCD2241FHDVX, LCD2241FHDVXWH, LCD2441FHDVX Instruction Manual

...

LCD 1941 DVX LCD 1941 DVXWH LCD 2241

LCD 2241

FHDVX FHDVXWH

LCD 2441 FHDVX LCD 2441 FHDVXWH

USER MANUAL (GB)

READ CAREFULLY BEFORE OPERATION

IMPORTANT SAFETY INSTRUCTIONS

This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

Please read this manual carefully before using this product.

Before connecting the AC power cord to the DC adapter outlet ,make sure the

voltage designation of the LCD TV corresponds to the local electrical supply .

If you are unsure of your power supply , ask your local power company .

Never insert anything metallic into the cabinet openings of the liquid crystal display LCD TV/monitor;otherwise it may create the danger of electric shock.

To avoid electric shock, Never touch the inside of the LCD TV/monitor and adapter. Only a qualified technician should open the case of the LCD TV/monitor/adapter.

Never use your LCD TV/monitor/adapter if the power cord has been damaged . Do not allow anything to rest on the power cord, and keep the cord away from place where people can trip over it .

Be sure to hold the plug, not the cord, when disconnecting the adapter from an electric socket.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.

Ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc.

Do not place naked flame sources, such as lighted candles on the apparatus.

Take attention to the environmental aspects of battery disposal.

Use the apparatus only in moderate climates (not in tropical climates).

IMPORTANT SAFETY INSTRUCTIONS

Openings in the LCD TV/monitor/adapter cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD TV/monitor on a bed ,sofa ,rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD TV/monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

Do not expose the LCD TV/monitor to extreme temperature conditions or to extreme humidity conditions.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not place the LCD TV/monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. It is damaged if dropped, hit or scratched. Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or chloride-these may damage the panel.

Locate your DC adapter near an easily accessible AC outlet.

If your LCD TV/monitor does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center.

High temperature can cause problems. Don`t use your LCD TV/monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the DC adapter when it is going to be left unused for an extended period of time .

To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

If the LCD TV/monitor is broken, do not try to repair it yourself. Contact qualified service personnel.

Unplug your DC adapter from the AC outlet before any service.

Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shook, or other hazards.

，

Following any service or repair, be sure the service technician performs safety checks to certify that your TFT-LCD TV/monitor is in safe operating order.

The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

This device works with a class 1 laser.

Top panel

Left panel

14 16

15 17

18 20

PANEL BUTTON FUNCTIONS

FRONT PANEL

1. IR sensor window

2. Indicator (the indicator is red when in standby mode, and blue when in working normally).

3. Mains Switch

LOCAL KEYBOARD PANEL

123456

1. Start of play or pause of play

2. Take the disc out

3. Select input source

4. Enter or exit menu

5. Decrease channel number

6. Increase channel number

7. Decrease sound volume

8. Increase sound volume

9. Switch between standby and power-on mode

789

PANEL BUTTON FUNCTIONS

INPUTS/OUTPUTS PANEL

1 2 3 4 5 6 7 8 9 10

1.HDMI input

. 12V DC power input (intended for feeding to the TV using a car battery power or external 12V DC power supply adapter)

3. SCART connecting terminal

4. PC/YPbPr audio input

5. PC VGA input

6. Y input

7. Pb input

8. Pr input

9. Audio Earphone output

10. TV signal input

POWER

S.MODE

P.MODE

678

FAV

MUTE

SCALER

SLEEP

RECALL

CALLEXITSETUP

SOURCE

CH-

T E X T M I X I N D E X I / II

CANCEL REVEAL HOL D S I ZE

GOTO A-B REPEAT ANGLE

DVD-MENU TITLE PBC

S.PAGE

DISPLAY TV/RADIO EPG SUBTITLE

VOL-

CH+

AUDIO

PAGE+PAGE-

ZOOM+

S.TITLE

ZOOM-

VOL+

POWER

MUTE

P.MODE

FAV

S.MODE

SCALER

SLEEP

678

RECALL

CALLEXITSETUP

SOURCE

CH-

CH+

VOL+

VOL-

32 33

TEXT MIX INDEX I/II

CANCEL REVEAL H O L D SIZE

GOTO A-B REPEAT ANGLE

DVD-MENU TITLE PBC

S.PAGE

DISPLAY TV/RADIO EPG SUBTITLE

ZOOM-

AUDIO

PAGE+PAGE-

S.TITLE

ZOOM+

SWITCHING ON

After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary cables include power have connected, Press the [STANDBY] button on the remote control to make the unit switch to power-on mode - you will see the LED indicator turn blue. Now you can enjoy the many features of your new TV.

The next you should do is:

STANDBY

POWER

STANDBY

EXIT

INDICATOR

SELECTING SOURCE OPERATION

You can select input source by using source menu. Press [SOURCE] button to show the

menu as follows:

The current source item is highlighted. Through press [ ] button on the remote control or [ CH+/CH- ] key on the front of LCD TV to select your desire, Press [ ] button, [VOL+/VOL-] key or [OK] button to confirm your choice .

SATURATION

V T

I T T

E S

SATURATION

TINT

SATURATION

TINT

TV SETUP

G N I

T E S

V T

COLOR SYSTEM

SOUND SYSTEM

FINE TUNING

AUTO

1CHANNEL

AUTO

144.25MHz

COLOR SYSTEM

SOUND SYSTEM

SELECT

ADJUST

SETUP

RETURN

Select color sysytem :"AUTO", "PAL" , and "SECAM"

Select sound system:"B/G","DK","I","L".

Programme Edit item enables to enter submenu to

set channel DELETE, RENAME, MOVE, SKIP, FAV.

Press RED button to delete channel. Press GREEN button to rename channel. Press YELLOW button to move channel. Press CYAN button to SKIP channel. Press FAV button to set favourite channel.