Salora LCD1521TNDVX, LCD1921TNDVX, LCD1922TNDVX, LCD2221TNDVX Instruction Manual

LCD -TFT

USER MANUAL (GB)

READ CAREFULLY

LCD1521TNDVX LCD1921TNDVX

LCD1922TNDVX

LCD2221TNDVX

BEFORE OPERATION

IMPORTANT SAFETY INSTRUCTIONS

This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the product.

Please read this manual carefully before using this product.

Before connecting the AC power cord to the DC adapter outlet ,make sure the

voltage designation of the LCD TV corresponds to the local electrical supply .

If you are unsure of your power supply , ask your local power company .

Never insert anything metallic into the cabinet openings of the liquid crystal display LCD TV/monitor;otherwise it may create the danger of electric shock.

To avoid electric shock, Never touch the inside of the LCD TV/monitor and adapter. Only a qualified technician should open the case of the LCD TV/monitor/adapter.

Never use your LCD TV/monitor/adapter if the power cord has been damaged . Do not allow anything to rest on the power cord, and keep the cord away from place where people can trip over it .

Be sure to hold the plug, not the cord, when disconnecting the adapter from an electric socket.

Openings in the LCD TV/monitor/adapter cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD TV/monitor on a bed ,sofa ,rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the LCD TV/monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.

Do not expose the LCD TV/monitor to extreme temperature conditions or to extreme humidity conditions.

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

IMPORTANT SAFETY INSTRUCTIONS

Do not place the LCD TV/monitor on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. It is damaged if dropped, hit or scratched. Do not clean the front with keton-type materials (e.g.Acetone ),ethyl alcohol, toluene, ethy lacid, methyl, or chloride-these may damage the panel.

Locate your DC adapter near an easily accessible AC outlet.

If your LCD TV/monitor does not operate normally in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service enter.

High temperature can cause problems. Don`t use your LCD TV/monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

Unplug the DC adapter when it is going to be left unused for an extended period of time .

，

To reduce the risk of fire or electric shock, and annoying interference, use the recommended accessories only.

If the LCD TV/monitor is broken, do not try to repair it yourself. Contact qualified service personnel.

Unplug your DC adapter from the AC outlet before any service.

Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shook, or other hazards.

Following any service or repair, be sure the service technician performs safety checks to certify that your TFT-LCD TV/monitor is in safe operating order.

The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection.

CONTENT

PANEL BUTTON FUNCTIONS

Front panel

Local keyboard panel

EXTERNAL EQUIPMENT

Connecting diagram

REMOTE CONTROL

Remote control 3

Remote buttons (TV mode option) 4

Remote buttons(DVD mode option) 7 Battery installation 8

LET S START'

Switching on 9

Selecting source operation 9

TV OSD MANUAL

First Time installation 11 TV Information 12 Video menu options 13 Audio menu options 14 Setup menu options 14 VGA / HDMI input 17 Timer menu options 18 Function menu options 18

TELETEXT FUNCTION

Teletext function 22

DVD OPERATION

Basic operation 24 Supporting DVD format 25 DVD functions operating instructions 26 MP3 / JPEG playback 28 Function settings 29

TROUBLESHOOTING

Display troubleshooting 35 Sound and TV troubleshooting 35

SPECIFICATIONS

Specifications 36

ACCESSORIES

Accessories 37

PANEL BUTTON FUNCTIONS

FRONT PANEL

Indicator (the indicator is red when in standby mode, and green when in working normally).

IR sensor window

LOCAL KEYBOARD PANEL (VERSIONS)

TV+DVD (15,6“, 19“) TV+DVD (22“)

PLAY\ II EJECT

TV/AV CH+ CH-

VOL+ VOLMENU POWER

TV/AV – select input source CH+ - increase channel number CH- - decrease channel number VOL+ - increase sound volume VOL- - decrease sound volume MENU – enter or exit menu POWER – switch between standby and power-on mode

TV/AV NEXT

CH+ PREV CH- STOP VOL+ PLAY\ II VOL- EJECT

POWER

NEXT – play the next Title / Chapter / track PREV – play the previous Title / Chapter / track STOP – stop of play PLAY\ II – start of play or pause of play EJECT – take the disk out

EXTERNAL EQUIPMENT

CONNECTING DIAGRAM

1. DVD SPDIF output

2. TV signal input

3. Audio Earphone output

4. PC audio input

5. CVBS / S-Video Right audio input

6. CVBS / S-Video Left audio input

7. CVBS input

8. S-Video input

9. SCART connecting

DVD or VCR player

teminal

10. PC VGA input

11. HDMI input

12. 12V DC power input

NOTE

You should insert all necessary cables BEFORE plugging in power cord.

REMOTE CONTROL

30 31

424 5

626 7

9 10

12 13

33 34

35 36 37 38

39 40

15 16 17 18 19 20

21 22

REMOTE CONTROL

REMOTE BUTTONS

TV mode option

1. AUTO

Reserved.

2. MUTE

Sound mute switch.

3. NUMBER BUTTONS

Select program number.

(

Swap between a previous program and the current program.

5. NICAM

Display program sound information, select NICAM sound channel.

6. CH+

To increase program number.

7. DISPLAY

Display current program information.

8. CH-

To decrease program number.

To select upward in the menu or increase channel number.

10. ENTER

Confirm the selection.

11.

Move cursor rightward or adjust the selected item in the menu, or increase sound volume.

12. EXIT

Exit or get back to the previous menu.

13.SMODE

To select sound equalizer modes: Personal, Voice, Music, Theatre.

14. SLEEP

15. FAV+

16. EPG

17. LANG

18. SUBTITLE

19. REVEAL

Display hidden teletext information.

20. SUBPAGE

21. YELLOW

Select a teletext link.

22. BLUE

RECALL)

(UP)

(RIGHT)

Setup the sleep timer.

Not used

Not used.

Open sub-page of teletext.

Select a teletext link.

REMOTE CONTROL

REMOTE BUTTONS

23. STANDBY

Switch between standby mode and power-on mode.

24. -/- -

To toggle one-two digits channel number entering mode.

25. ASPECT

Change picture dimensions ratio in sequence: FullScreen, Zoom1, Zoom2, Auto, 4:3, 14:9,

16:9, Subtitle.

26. VOL+

Increase sound volume.

27. VOL-

Decrease sound volume.

28. (LEFT)

Move cursor leftward or adjust the selected item in the menu, or decrease sound volume.

29. (DOWN)

Move cursor upward in the menu, or change the channel.

30. LCD MENU

Open/close user menu.

31.PMODE

Change picture modes in sequence: Standard, Personal, Movie, Sport, Mild, Game.

32. INPUT

Open/close input source selection menu. Use TV option to activate TV mode and

DVD

option – to activate

33. FAV-

Not used

34.FAV

Not used

35. HOLD

Stop teletext on current page.

36. TEXT

Toggle teletext mode between Enabled/Mixed/Disabled.

37. SIZE

Magnify teletext page.

38. INDEX

Display main content page.

39. GREEN

Select a teletext link.

40. RED

Select a teletext link.

mode.

DVD

REMOTE CONTROL

43 44

46 47 49

50 53

54 57 60

51 52 55 56 58 59

REMOTE CONTROL

REMOTE BUTTONS

DVD mode option

41. (EJECT)

Disk in/out.

42.DVD SETUP

Display DVD setup menu.

43. (PLAY/PAUSE)

Play or pause of playing.

44. (STOP)

Stop of playing.

45. (SLOW MOTION)

Different speeds of playing in sequent.

46. (PREVIOUS)

Play to the last Title / Chapter / Track.

47. (NEXT)

Play to the next Title / Chapter / Track.

48.AUDIO

Toggle between different audio modes in sequent.

49. (BACKWARD)

Toggle between different speeds in sequent.

50. (FORWARD)

Toggle between different speeds in sequent.

51.ANGLE

Change camera angle in DVD mode.

52.ZOOM

Toggle between different zoom modes in sequent.

53.D.MENU

Return to the root menu.

54.TITLE

Return to the title menu.

55.D.DISP

To activate roll-down menu for the current title on screen.

56.GOTO

Play favourite Title / Chapter / Track number.

57.PROG

Program playback.

58.REPEAT

Repeat playback.

59.A-B

To segment repeat.

60.INTRO

Not used.

REMOTE CONTROL

BATTERY INSTALLATION

Remove the battery cover. Insert two SUM-4(AAA) batteries matching the -/+ polarities of

the battery to the -/+ marks inside the battery compartment, as follows:

BATTERY LIFE

Normally, battery can be used one year.

If the remote control is still invalid when very near to the TV's remote sensor window, please use new battery.

Please use SUM-4(AAA) battery.

NOTES

Never use rechargeable battery.

Never charge, short-circuit, disassemble and heat the battery, or throw it into fire.

Pay attention not to fall or knock the remote controller, which will cause damage or function failure to it.

Do not use new and old battery together.

When not using the remote controller for a long time, please take out battery to avoid liquid leakage. Before replacing new battery, please clean the electrolyte in the remote controller.

If electrolyte splashes into body, please clean it with water.

CAUTION：

Please put battery in the place children cannot touch. If swallow by accident, please contact with the local doctor immediately.

LET S START'

After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary

cables include power have connected, the next you should do is:

• Press the [STANDBY] button on the remote control to make the unit switch to power-on mode - you will see the LED indicator turn green. Now you can enjoy the many features of your new TV.

SELECTING SOURCE OPERATION

You can select input source by using source menu.

• Press INPUT button or TV/AV key on the right side of LCD TV to show the menu as follows:

TV SCART CVBS S-VIDEO

VGA HDMI DVD

The current source item is highlighted.

• Through press button on the remote control or CH+/CH- key on the right side of LCD TV to select your desire, press confirm your choice.

button, VOL+ key or ENTER button, to

OSD MANUAL

First Time Installation

Country

Language

Delete Analog Program

Analog Program Search

Select Adjust

Country

Press ▼ / ▲ button and then use ◄ / ► to select the country.

Language

Press ▼ / ▲ button and then use ◄ / ► to select the OSD language.

Delete Analog Program

Press ▼ / ▲ button and then use ◄ / ► to select whether to delete all the analog programs.

Analog Program Search

Press ▼ / ▲ b utton and t hen use ◄ / ► to se lect whet her to star t sear ching ana log progr ams.

Canc el

Fran ce

Engl ish

If this is the first time you open the TV and there is no prog ram s in th e TV m emo ry, the Fi rst Time Insta lla tion menu w ill a ppe ar in the pict ure .

Afte r set tin g the ite ms, s ele ct OK to fi nis h the f irst ti me in sta llati on, o r sel ect Cancel t o exi t this menu.

If you cancelled the first time installation, it will remind you wheth er to set t he fi rst t ime ins tal lat ion next tim e.

First Time Installation

First time installation is not finished! Are yo u sur e to ex it?

YES

Do It ne xt ti me

OSD MANUAL

TV Information

Prog ram Informati on

Press DISPLAY or NIC AM button to display the program information.

1. The number o f cur ren t program.

2. The colour s yst em of curren t pro gra m, coul d be se lec ted in Manual Tuning men u(an optio n of SETUP men u).

3. The name of cu rre nt program .

4. The l abe l of cu rrent program, you can label it in Manual Tuning me nu( an op tion of SETUP me nu) .

5. The sound sy ste m of current p rog ram , could b e sel ect ed in Manual Tuning menu( an op tio n of SETUP menu) .

6. The NICAM mo de of c urrent pro gra m.

If the i con o f NIC AM mode i s red , it me ans the c urr ent p rogra m sup pli es multi NIC AM si gnals, and y ou ca n

sele ct it b y pre ssing NICAM button.

The NICAM modes and relative icons:

Mono Stereo Dual Dual

TV Labe l

25 Auto No Signal

Auto

OSD MANUAL

VIDEO menu options

Pres s MEN U but ton on the fro nt pa nel o r LCD-M ENU o n the r emote cont rol t o dis play th e mai n men u.

Picture Mode

Contrast

Brightness

Colour

Tint

Sharpness

PICTURE

Sele ct

Standard

Normal

Adjust

1. Pre ss ◄ / ► bu tto n to sele ct PI CTU RE in the m ain menu .

2. Pre ss ▼ / ▲ bu tto n to sele ct th e opt ion tha t you want t o adj ust i n the PIC TUR E men u.

3. Pre ss ◄ / ► bu tto n to adju st.

4. Whe n you a re sa tisfi ed wi th yo ur adju stm ent , pre ss the L CD- MEN U butto n to re tur n to the pr evi ous m enu or pre ss th e EXI T butto n to ex it th e main me nu.

Picture Mode

Sele ct Pi ctu re Mode i n PIC TUR E menu. ( Avail abl e pic ture mo de: S tan dard, Pers ona l, Movie, Sp ort , Mild, Game .) If you c han ge th e value o f Con tra st, Bri ght nes s, Colo ur, Tin t , Sha rpness or Co lou r tem perat ure o n the p ictur e men u, th e pict ure m ode w ill be ch ang ed to " Perso nal " aut omatical ly. You may se lec t the pictur e mod e dir ectly b y pre ssi ng PMOD E butt on.

TIPS: You can press PMODE but ton on th e rem ote c ontro l to se lec t the Pictur e Mod e dir ectly.

Contrast

Press ▼ / ▲ b utton and t hen use ◄ / ► to ad just the co ntrast of t he pictur e.

Contrast 28

After a djust the v alue you wa nt, pr ess LCD-MENU button to ret urn to t he previe w MENU.

Brightness

Press ▼ / ▲ b utton and t hen use ◄ / ► to ad just the br ightnes s of the pict ure.

Colour

Press ▼ / ▲ b utton and t hen use ◄ / ► to ad just the co lour satu ration.

NOTE : Thi s opt ion is in val id in PC mode, a nd it w ill be shown i n gra y.

Tint

Press ▼ / ▲ b utton and t hen use ◄ / ► to ad jus t the tone of co lou r whe n your sy ste m is in N TSC.

Sharpness

Press ◄ / ► t TV. (Avai lable Sha rpness Mo de: No rmal,Sh arp, Sharp est, Soft est, Soft .)

Colour temperature

Sele ct an o pti mum col our t emp eratu re mo de to s uit your eyes f or vi ewi ng amon g Nor mal , Warm a nd Co ld.

DNR (Digital Noise Reduction)

If the b roa dca st sign al re cei ved is we ak, y ou ca n select the DN R opt ion t o reduc e the v ide o noise l eve l bet ween Off, Low,Mid a nd Hi gh.

o selec t the sharp ness mode o f your

PICTURE

Colour

Tint

Sharpness

Colour temperature

DNR

Select Adjust

Normal

Off

OSD MANUAL

AUDIO menu options

Press MENU but ton o n the fro nt pa nel o r LCD-MENU on the rem ote c ont rol to displ ay th e mai n menu.

1. Pre ss th e ◄ / ► but ton to se lec t SOU ND in the main m enu .

2. Pre ss th e ▼ / ▲ but ton to se lec t the o ption that y ou want t o adj ust i n the SOU ND me nu.

3. Pre ss th e ◄ / ► but ton to ad jus t.

4. Whe n you a re sa tisfied wi th yo ur ad justm ent , pre ss the LC D-M ENU b utton t o ret urn t o the previo us me nu or pre ss th e EXI T butto n to ex it th e main menu.

Volume

Sound Mode

Bass

Treble

Balance

SOUND

Personal

Sele ct

Adjust

Volume

Press ▼ / ▲ b utton and t hen use ◄ / ► to ad just the so und level .

Volume 28

After a djust the v alue you wa nt, pr ess LCD-MENU button to ret urn to t he previe w MENU.

Sound Mode

Sele ct So und M ode in SOUND m enu . (Avai lab le sound mod e: Pe rao nal, Voi ce, M usi c, Thea tre.) If you c han ge th e value of Bas s and Tr ebl e on the So und m enu , the s ound mo de wi ll be c hanged to "P ers ona l" automat ica lly. You ma y sel ect the soun d mod e dir ectly by pre ssi ng SM ODE button .

TIPS: You can press SMODE but ton on th e rem ote c ontro l to se lec t the Sound Mo de di rec tly.

Bass

Pres s ▼ / ▲ but ton a nd then u se ◄ / ► to i ncr ease or d ecr eas e the lev el of t he lo wer-p itc hed s ounds.

Treble

Pres s ▼ / ▲ but ton a nd then u se ◄ / ► to i ncr ease or d ecr eas e the lev el of t he hi gher- pit che d sounds.

Balance

Press ▼ / ▲ b utton and t hen use ◄ / ► to ad just the au dio outpu t betw een l eft an d right spe akers.

Setup menu options

Press MENU but ton o n the fro nt pa nel o r LCD-MENU on the rem ote c ont rol to displ ay th e mai n menu.

SETUP

Country

Auto tuning

Manual tuning

Program Edit

Select Adjust

OSD MANUAL

1. Pre ss th e ◄ / ► but ton to se lec t SET UP in the main men u.

2. Press the ▼ / ▲ button to select your option what you want to adjust in the SETUP menu.

3. Pre ss th e ◄ / ► but ton to ad jus t.

4. When you are satisfied with your adjustment, press the LCD-MENU button to return to the previous menu or press the EXIT button t o exi t the main men u.

Country

This option allows you to select the country.

Auto t uning

This o pti on al lows yo u to tu ne th e channels t hat c an be r eceiv ed automatically.

Note: Befor e you p erf orm Auto Tu nin g, yo u must ch oos e the c ountr y whe re yo u are by selec tin g COUNTRY option.

Auto Tuning

Press E NTER key to s tart.

ENTER

Enter Return

Pres s ENT ER ke y to star t.

Auto Tun ing

Searc hing

ATV

MEN U

You ca n pre ss LCD-MEN U but ton to stop au to tu nin g and clo se th e OSD m enu.

Exit

215.0 0MHz

Manual Tuning

This o pti on al lows yo u to pe rfo rm Manu al Tun ing .

Note: Before you perform Manual Tuning, you must choose the country where you are by selecting Country option

in the F UNC TIO N menu.

1. Pre ss ◄ / ► to s ele ct Manu al tu nin g in SETU P men u.

2. Pre ss ▼ / ▲ to p erf orm you r sel ect ion, th e men u of Ma nual tu nin g wil l display on t he sc ree n.

Manual tuning

Program

Sound System

Colour System

Program Label

AFT

Manual Search

Auto

Off

471.25 MHz

Select Adjust

Program

The cu rre nt pr ogram n umb er. Pr ess ◄ / ► to se lec t the u pper or l owe r pro gram.

Sound System

Press ◄ / ► to select a corresponding sound system, such as DK, L/L’, BG, I.

OSD MANUAL

Colour System

Pres s ◄ / ► to se lec t a corre spo ndi ng colo ur sy ste m, such a s Auto , PAL , SEC AM.

Program Label

This o pti on al lows yo u to la bel a c hannel, yo u can a lso relabe l the p rog rams ha ve be en la beled .

1. Sel ect a c han nel you w ant t o lab eled.

2. Pre ss▼ / ▲ s ele ct Prog ram L abe l in SETU P menu.

3. Pre ss▼ / ▲ t o per form yo ur se lec tion. T he menu o f pro gra m label w ill d isp lay as be low :

Program Label

4. Pre ss th e num eric bu tto ns to i nput th e num ber s directly o r pre ss to sel ect t he le tters .

5. Pre ss ◄ / ► to m ove t he curs or.

6. Pre ss EN TER , LCD-M ENU o r EXI T butto n to co nfi rm and re tur n to pr eviou s men u.

▼ / ▲

AFT (Auto Fine Tune)

Due to w eak s ign als or a wr ong a nte nna con fig ura tion, some o f the c hannels ma y not b e tun ed to the b est r ece ption cond iti on. AF T fu nct ion all ows y ou to f ine tun e cha nne l selec ted (th e frequenc y of ch annel is aro und t he va lue in Manu al Se arc h optio n.

Manual Search

Manua l Search

This o pti on ha s two fun cti ons :

1. Set t he fr equ ency of c han nel f or AFT opt ion.

2. Pre ss ► bu tto n for 3+ se con ds an d it will s tar t aut o tunin g fro m thi s frequenc y.

Prog ram E dit

This f unc tio n allow s you t o sor t the TV pr ogram s acc ord ing to yo ur pr efe rence s, as f oll owing:

- - - . - -

Channel List

Flags ATV

Favourite

1. Pre ss ▼ / ▲ to s ele ct Prog ram E dit i n SETUP menu.

2. Pre ss ◄ / ► to e nte r into th e sub m enu , a chann el li st wi ll disp lay.

3. Pre ss ▼ / ▲ to s ele ct the ch ann el in t he list w hic h you w ould li ke to s ort .

4. Pre ss ► to p erf orm you r sel ect ion.

5. Pre ss ▼ / ▲ to s ele ct the lo cat ion y ou woul d lik e to pl ace the c han nel .

6. Pre ss ◄ to p erf orm you s ele cti on. 7 . Pres s LCD -ME NU to ret urn t o the p revio us me nu or p ress EX IT to exi t.

Skip

Lock

Move

OSD MANUAL

VGA input

SETUP menu of VGA input (for setting the PC picture position):

PC Position

Auto Sync

Phase

Clock

H Position

V Position

Position Reset

Select Adjust

HDMI input

SETUP menu of HDMI input (for setting the HDMI picture position):

Begin

H Position

V Position

Position Reset

HDMI Position

Select Adjust

OSD MANUAL

Timer menu options

Pres s MEN U but ton on th e fro nt pa nel or LC D-M ENU o n the remote c ont rol to displ ay th e mai n menu.

Sleep Timer

OSD Timer

TIMER

0 Min.

30Sec

Select Adjust

1. Pre ss th e ◄ / ► but ton to se lec t TI MER i n the main m enu .

2. Pre ss th e ▼ / ▲ but ton to se lec t you r option what y ou wa nt to a djust in the TIM ER me nu.

3. Pre ss th e ◄ / ► but ton to ad jus t.

4. Whe n you a re sa tisfied wi th yo ur ad justm ent , pre ss the LCD-MENU button to return to the previous menu or press the EXIT button to exit the main menu.

Sleep Timer

Sele ct th e sle ep time t o put a uto matic all y the TV in s tan dby mod e. Tim er ca n be sele cte d as 0m in, 15min, 3 0mi n,4 5min, 60mi n,7 5mi n,90m in, 105 min,1 20m in. Al so you can sel ect t he sl eep tim e by pr ess ing SLE EP bu tto n repea ted ly.

OSD Timer

You ca n sel ect the time w hen t he OSD displ ay on t he sc reen su ch as : 5Se c,10S ec, 15S ec,20 Sec ,25 Sec,3 0Se c.

Function menu options

Pres s MEN U but ton on th e fro nt pa nel or LC D-M ENU o n the remote c ont rol to displ ay th e mai n menu.

FUNCTION

Language

Vide o Size

Blue screen

Child Lock

Firs t Time I nst allat ion

Reset

Select Adjust

1. Pre ss th e ◄ / ► but ton to se lec t FUN CTION i n the m ain m enu .

2. Pre ss th e ▼ / ▲ but ton to se lec t you r option wha t you w ant t o adjus t in th e FUN CTION m enu .

3. Pre ss th e ◄ / ► but ton to ad jus t.

4. Whe n you a re sa tisfied wi th yo ur ad justm ent , pre ss the LCD-M ENU b utt on to ret urn t o the p revio us me nu or p res s the EXIT b utt on to e xit the m ain m enu .

English

FullScreen

Language

Pres s ◄ / ► to se lec t the OSD l ang uag e.

Video Size

This o pti on al lows yo u to se lec t the scr een d isp lay mode whi ch be st co rresp ond s to yo ur view ing r equ ireme nts .

Note : The a vai lable a spe ct mo de may be d iff ere nt in dif fer ent i nput si gna l.

OSD MANUAL

Blue screen

This o pti on al lows yo u to se lec t the blu e bac kgr ound on or off. If o n, th e scr een backgr oun d will turn bl ue at v ery weak o r no si gna l condi tio n.

Child Lock

Press ENTER or ► button to set the child lock.

You need to en ter the PIN c ode if the Ch ild lo ck is set “on ”, an d the defau lt PIN c ode is empt y, you can pr ess ENTER button directly to enter.

PIN Code:

Delete

0~9

TIPS: The superuser's (administrator's) password is 4711.

Child Lock On

Key Lo ck On

Change PIN Code

Hotel Lock

ENTER

Input

CHILD LOCK

Enter

Select Adjust

Child Lock

Press E NTER or ► but ton to set th e child loc k.

Key Lock

Press E NTER or ► but ton to set th e key lock.

Change PIN Code

Press ► b utton to en ter Chang e PIN Code me nu.

Chan ge PI N Cod e

Old PI N Cod e

New PI N Cod e

Enter Again

Select

Adjust

0~9

Input

ENTER

Confirm

Old PI N Code

Press 0 ~9 button s to enter th e corr ect old PIN c ode, you ca n not chang e the PIN cod e if you ente red a wr ong PIN code.

OSD MANUAL

New PI N Code

Press 0 ~9 button s to enter th e new PIN cod e you wa nt.

Chan ge PIN Code

Press 0 ~9 button s to enter th e PIN code yo u ente red in the Ne w PIN Code me nu again to c onfirm th e new PIN code.

Hotel Lock

Press

► butto n to enter Hotel Lock menu.

LOCK SETTING

Hotel Lock On

Source Lock

Default Source

Default Prog

Max Volume

Clear Lock

OFF

100

Select Adjust

1. Press the

2. Press the

ź / Ÿ

button to select your option what you want to adjust in the LOCK SETTING menu.

Ż / Ź

button to adjust.

3. When you are satisfied with your adjustment, press the LCD-MENU button to return to the previous menu or press

the EXIT button to exit the main menu.

Hotel Lock

Press

Ż / Ź

to select On or Off of Hotel Lock

Source Lock

Press

button to enter Source Lock menu.

Source Lock

SCART

CVBS

S-VIDEO

VGA

HDMI

DVD

Off

Press the

Press

ź / Ÿ

button to select your option what you want to adjust in the Source Lock menu.

Ż / Ź

to select On or Off of the Source.

When you are satisfied with your adjustment, press the LCD-MENU button to return to the previous menu or press the

EXIT button to exit the main menu.

OSD MANUAL

Default Source

Press

Ż / Ź

to select the default source from TV, SCART, CVBS, S-VIDEO, VGA, HDMI or DVD.

Default Prog

Press

Ż / Ź

to select the default program in Hotel mode.

Max Volume

Ż / Ź

Press

Clear Lock

Press

First Time Installation

Press

to adjust the max volume in Hotel mode.

Ż / Ź

to clear the lock settings in Hotel mode.

► butto n to open the first time installation menu, and the operation of this menu is in page 11.

Reset

Press E NTER or

► button to reset the TV to the factory default.

TELETEXT FUNCTION

Most TV stations provide cost-free teletext information, including the latest news, weather information, TV program list and stock information etc. You just input the needed teletext page according to the teletext content.

TELETEXT MODES DISPLAY

• Select the channel with teletext signal;

• Press TEXT button to activate teletext mode;

• Select desired teletext page using colour link buttons;

• Press TEXT again to activate mixed mode, while channel picture and teletext information are presented on

the screen at the same time;

• Press TEXT button once again to disable teletext mode.

PAGE SELECTION

• You can input 3 digital numbers to enter the page you want to watch through number buttons. If the inputted number is invalid, you need to input correct 3 digital numbers again after you finished inputting these 3 digital numbers.

• You can select to turn pages forward or backward through button.

LOCK

• You can press HOLD button to lock teletext page. Press this button again to cancel locking.

INDEX

• Pressing INDEX button to display content page.

• Enter a certain teletext page through inputting number buttons.

ZOOM IN TELETEXT

• When teletext page shows, you may double zoom in to display this teletext page;

• Press SIZE button to zoom in the upper half part of teletext page;

• Press SIZE button again to enter the under half part of teletext page;

• Press this button once more to return to original display mode.

DISPLAY MODE

• Press REVEAL button to display the hidden teletext information.

• Press this button again to cancel.

COLORIZED BUTTONS (RED, GREEN, YELLOW, BLUE)

• Select the corresponding teletext page through colorized buttons.

DVD

DVD OPERATION

Basic operation

1. Turn O N and OFF the D VD functi on

- Turn on th e LCD TV and t hen pr ess INPUT button on RC. Use the buttons

confirm this with ENTER button.

2. Inse rt Disc to DV D

- Inser t the Disc to t he Disc slo t (printe d side of the d isc has to face towards front of the unit), the player will lo ad the disc a utomati cally.T here w ill have an o n screen in dication “CLOSE” then “READ”. After

loadi ng the disc c ontent, i t will swit ch to play mo de automa tically. If the disc is already placed inside, the disc will be read automatically.

NOTE: - For some d iscs, aft er loadin g the conte nt of the dis c, need to pr ess or sele ct from the d isc menu

- Pleas e make sure w hen inser ting the Di sc, the pri nted side o f the disc sh ould b e fac ing yo u Whe n inser ting the Di sc incorr ectly, yo u may damag e the DVD mec hani sm.

3. Play t he DVD

4. Menu playback (for DVD/ super VCD and VCD 2.0 discs)

to start.

- According to the disc content, the disc menu will display for your select ion. When p laying th e disc , you may use b utton to to ggle betw een Play an d Pause mod e. Th is produc t also supp orts Menu , Title,

Sequential and Program playback.

- Press

For DVD d iscs, the s creen wil l display t he DVD Disc M enu (Root M enu) For Sup er VCD & VCD2 .0 discs, t he screen w ill display the Super VCD, VCD2.0 Disc Menu (PBC: [OFF]) (Pres s the MENU bu tton to dis play the PB C status) . Playb ack the Sup er VCD & VCD2 .0 discs, t he defaul t PBC statu s is ON.

- For DVD discs, use the navigation buttons to select and Play the highlighted contents; For Super VCD &

VCD2. 0 discs, us e the numer ic button s to play you r favorit e content directly. NOTE: PBC sho uld be OFF.

- Press E NTER or but ton to star t from the hi ghlight ed conten t.

- Return to the Root Menu when playing the disc

For DVD d iscs, pre ss MENU to di splay the D isc Menu. For Sup er VCD & VCD2 .0 discs, w hen PBC is ON , press MEN U to display the Disc Menu.

- STOP

Press b utton onc e to stop. Pr ess butto n to resume f rom where y ou stoppe d. Press b utton Twi ce to stop. P ress butt on to start f rom beginning. In order to protect the disc, press but ton then press EJECT button to take the disc out. When the disc is e jected, h old the dis c edge slig htly and ta ke it from th e eject dir ecti on to p reve nt scratc hes. When no t using the D VD functi on (in stan d-by mode o r using oth ers modes f or a lon g time), please take out the disc to protect the DVD loader and the disc.

D.MENU button

▲ / ▼

select DVD mode and

5. Tit le playba ck (for DVD d isc only)

- Press TITLE bu tton, the re will hav e an on scree n indicat ion “TITLE”.

- Press t he direct ion or nume ric butto ns to selec t your favo rite title.

- Then w ill play fr om the firs t chap ter of the se lected ti tle.

6. Sequ ential pl ayback (f or DVD/ Sup er VCD/ VCD / CD/ CD-G/ HD-CD and M p3/ JPEG di scs)

- For Su per V CD & VC D discs , if PB C is “O N” stat us, p res s butto n wil l ent er the di sc me nu. P ress MENU butt on to turn P BC OF F. Pres s butto n to st art in seque nt. F or others, w hil e it stopped , pre ss button to s tar t in sequent .

7. Prog ram playb ack (for DV D/ Super VC D/ VCD/ CD/ C D-G/HD- CD and Mp3/ J PEG discs )

- Press PROG button.

- Usin g Pro gra m playb ack , you c an sele ct ma x. 16 t racks f rom t he di sc to pla yba ck in p rogra mme d ord er.

- OSD fo r pro gra m playb ack a s bel ow.

DVD OPERATION

DVD/ M P3/ JPE G discs S uper VCD/ VCD/ CD /CD-G/ D-CD discs

PROG

T C T C T C T C

1--:-- 5--:-- 9--:-- 13--:--

2--:-- 6--:-- 10--:-- 14--:--

3--:-- 7--:-- 11--:-- 15--:--

4--:-- 8--:-- 12--:-- 16--:--

PLAY CLEA R

- If it is in PBC ON status, using program playback will turn to PBC OFF automatically.

- According to the highlight area input the title and chapter number by numeric buttons, press but ton t o start ; or mo ve to the < PLAY> by navigation buttons, press ENTER butt on to s tart.

- While playing the program, you may press PROGRAM button to display the program menu for edit. To clear the program by moving to <CLEAR> and press ENTER butto n. Or press b utton t o end t he program. When press but ton again, the disc will play by sequent.

- While playing the program, there will have an on screen indication “PRG PLAY” and the current title and chapter number.

PROG

----- 5----- 9----- 13-----

2----- 6----- 10----- 14-----

3----- 7----- 11----- 15-----

4----- 8----- 12----- 16-----

PLAY CLEA R

Supporting DVD format

This products can play the following format of DVD disc.

Disc Type

DVD 12cm

Disc Size (Diameter) Recorded Time

Single side:120mins. Approx

Double side:240mins. Approx

Recorded Content Remarks

DVD format: Compressed digital audio and video

Super VCD

VCD

HD-CD

MP3/JPEG

Also support DVD-R, CD-R, CD-RW playback.

NOTE:

12cm

MPEG2

45mins. Approx

74mins. Approx

74mins. Approx CD-DA: Digital audio

74mins. Approx

600mins. Approx

Compressed digital audio and video

MPEG1 Compressed digital audio and video

HD-DA: Digital audio

Digital audio

Include SVCD

Include: VCD2.0/ VCD1.1 VCD1.0/ DVCD

DVD OPERATION

DVD Functions operating instructions

1. Play ( for DVD/ Su per VCD/ VC D/ CD/ CD-G /HD-CD an d Mp3/ JPEG discs)

- For DV D dis c, press but ton f rom root or ti tle m enu; while playing the DVD, you may play your favorite title directly with titl e sel ection by pr ess ing the TITLE button.

- For Su per V CD & VCD discs , whi le pl aying the disc, you may play your favorite tracks by numeric buttons. (NOT E: Wh en us ing the P rog ram playba ck or w hen it is P CB ON s tat us, you c an on ly us e or butt ons t o

chan ge th e tra ck)

- For CD , CD- G & HD-CD disc s, wh ile p layin g the d isc , you may p lay your favorite tracks by numeric buttons.

- For MP 3 / JPE G disc, you ma y pla y your favorite tracks by numeric buttons from the content menu.

- If input track number is not valid, it will not function.

NOTE: From track 1-10, use numeric buttons directly; For tracks over 10, press - / -- button first. (E.g. Track 15, press -/--, then 5 )

2. Previous/Next (for DVD/ Super VCD/ VCD/ CD/ CD-G/HD-CD and Mp3/ JPEG disc s)

- Whil e pla yin g the dis c; Pres s but ton to play to t he la st Title / Chap ter / t rack. Pres s but ton to play to t he ne xt Title / Chapter / tra ck

- For su per V CD & VCD discs , in PB C OFF status ;

If the current track is the first one, press bu tto n will stop th e pla yback. If the c urr ent track is t he la st one, pres s but ton will sto p the p layback.

- For DV D dis cs, the abov e fun ctions may v ary d ue to different DVD d isc 's structu re.

3. Forw ard/ Back ward (for D VD/ Super V CD/ VCD/ CD / CD-G/HD -CD and Mp3/ JPEG discs)

- While playing the disc, you may use forward or backward function.

- There are 4 speeds for forward. Press butto n to to ggl e betwe en di ff ere nt speeds in s equent. (FORWARDx2 /

FORWA RDx 4 / FORWARDx8 / F ORWA RDx20 / Play ).

While in backward, you may press to re sum e normal spe ed. For CD , HD- CD, MP3, bac kwa rd also has au dio o utp ut. For DV D dis cs, if backw ard t o first titl e / chapter, it w ill start fr om th e beginning. For Su per V CD & VCD discs , in PB C ON status, i f bac kward to the f irs t track, it wi ll start from the beginning.

NOTE: Durin g For war d or Back war d, th e sound w ill b e off.

4. Slow m otion(f or DVD/ Sup er VCD/ VCD discs)

- Whil e pla yin g the dis c, yo u may u se slow m oti on fu nctio n.

Ther e are 6 s pee ds for sl ow mo tio n. Pres s but ton to toggle between different speeds in sequent. (SF1/2, SF1/3, SF1/ 4, SF 1/5, SF1/6 , SF1 /7, Play). Whil e in sl ow mo tion, y ou ma y pre ss to res ume n ormal spee d.

NOTE: Duri ng Sl ow mo tion, t he so und w ill be off.

5. Paus e (for DVD/ S uper VCD/ V CD/ CD/ CD- G/HD-CD a nd Mp3/ JPE G discs)

- FOR CD , CD- G, HD-CD & MP3 /JP EG discs, pr ess b utton to pau se; p ress butto n to re sume.

- FOR DV D, Su per VCD, VCD d isc s, press but ton t o pause; pre ss bu tton to play bac k frame by fra me; p ress bu tto n to res ume .

6. Repe at (for DVD / Super VCD / VCD/ CD/ CD -G/HD-C D and Mp3/ JP EG discs)

- Press REPEAT button onc e to di splay the cu rre nt repeat mo de.

For Super VCD, VCD, CD, CD-G, HD-CD, discs, while playing in sequent, you m ay us e the repeat p lay back. Ther e are 2 r epe at mode s, pr ess REPEAT to tog gle bet wee n diffe rent modes in sequent. (REPEAT (OFF)/ REPEAT (1) /REPEAT (ALL)). For DV D dis cs, you may se tup t he repeat pl ayb ack mode. There are 2 r epe at modes, pr ess R EPEAT to toggle between different m ode s in sequent . (RE P: (OFF) / REP : (CH APTER ) / REP : (TITLE) / REP: ( ALL)) . For MP 3 / JPE G discs, whi le pl aying the di sc, y ou may use the r epeat playback. There are 3 rep eat mod es, p res s

REPEAT to tog gle b etw een differen t mod es in sequen t. (R EPEAT (OFF ) / REPEAT (1) / REPEAT (DIR) / REPEAT (AL L)) .

7. Disp lay (for DV D/ Super VC D/ VCD/ CD/ C D-G/HD- CD and Mp3/ J PEG discs )

- Press

D.DISP button to activate the on screen roll-down menu for the current Titl e, Ch apt er, time a nd ot her i nform ati on

+ 146 hidden pages

Salora LCD1521TNDVX, LCD1921TNDVX, LCD1922TNDVX, LCD2221TNDVX Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual