3. Mains Power Switch - Completely turns ON or OFF the power to the TV set to save on electricity.
Sencor Touch Keyboard (controlled by a soft finger touch)
LABEL SIDE
SIDE PANEL
1
2
3
4
6
5
7
8
9
1. TV signal input
2. USB connector
3. Audio Earphone output
4. AV (Right/Left/Video) input
5. Y/Pb/Pr input
6. CI connector
7. PC VGA input
8. PC and Y/Pb/Pr audio input
9. HDMI inputs
EXTERNAL EQUIPMENT
CONNECTING DIAGRAM
Y
Pb
Pr
BACK PANEL
12354
1. Mains Switch
2. AC Power supply
3. SCART connecting terminal
4. SPDIF output
5. 12V DC power input
(intended for feeding to the TV using a car battery power or
external 12V DC power supply adapter)
REMOTE CONTROL
REMOTE BUTTONS
'
REMOTE CONTROL
REMOTE BUTTONS
,
REMOTE CONTROL
BATTERY INSTALLATION
LET'S START
SWITCHING ON
After the unit has been suitably placed / fixed, on the desk or on the wall, and all necessary
cables include power have connected, the next you should do is:
Press the [STANDBY] button on the remote control to make the unit switch to power-on
mode - you will see the LED indicator turn green. Now you can enjoy the many features of
your new TV.
SELECT SOURCE OPERATION
You can select input source by using source menu. Press [SOURCE] button on the remote
control to show the menu as follows:
The current source item is highlighted. Through press [] button on the remote control
to select your desire. Press [OK] button to confirm your choice.
Input Source
DTV
ATV
SCART
Component
PC-RGB
HDMI1
HDMI2
AV
DVD
USB
OK
Select
Retu rn
MEN U
DTV MENU SETUP
PLEASE NOTE, THAT IF SOME ITEMS ARE INACTIVE/UNAVAILABLE (GRAYED-OUT
IN THE OSD MENU) THEY ARE NOT DISCUSSED IN THIS CHAPTER. THESE ITEMS
ARE DETAILY DESCRIBED IN OTHER CHAPTERS.
In DTV mode, press [SETUP] button on the remote control
Through pressing [/] button on the remote control, you can select LCD menu sections
(menu sections consist of “CHANNEL”, "PICTURE", "SOUND", "TIME", "OPTION", "LOCK").
Press [] button on the remote control to select the item in this menu section, and then
press [/] button to adjust parameter value. Press [EXIT] or [SETUP] button to exit from
menu tables.
CHANNEL
Select CHANNEL section to setting DTV channels. You may select Auto Tuning, DTV
Manual Tuning, ATV Manual Tuning (described in ATV MENU SETUP), Programme Edit,
Signal Information, CI Information, LCN Sorting and Software Update(USB)
CHANNEL
CHANNEL
>
Auto Tuning
DTV Manu al Tu ni ng
ATV Ma nu al Tu nin
Progra mm e Ed it
Signal I nf or ma ti on
CI Infor ma ti on
LCN Sort in g
Softwa re U pd at e (U SB )
g
>
Auto Tuning item enables to adjust channel setting automatically.
Select Auto Tuning item, press [OK] button to enter Tune Type selection menu.
Press [ ] button to select tuning type between DTV+ATV, DTV or ATV.
/
Press [//] button to select your country.
Move
MENU
Return
Tune Type DTV+ATV
ENTER
Select
EXIT
Exit
UK Estonia Tunis
New Zealand Turkey Algeria
United Arab
Emirates
Press [OK] button to start auto searching.
Moro cc o Eg yp t
Channel Tuning
TV : 0 Programme
DTV : 0 Programme
Radio : 0 Programme
Data : 0 Programme
0 %... (TV)
Signal information
Channel 255
Network ...
Modulation QPSK
Strenght 91
Quality 0
DTV MENU SETUP
Select DTV Manual Tuning item, press [/] button to
select channel number and press [OK] to start search.
Programme Edit item enables to enter submenu to set
channel Delete, Rename, Move, Skip and add to
favourite list Fav.
Signal Information item enables to obtain information
about the Channel Nomber, quality and strength of the
signal.
Programme Edit
17 Digital
Delete
OK
OK
Rename
FAV
Move
FAV
DTV
MENU
Skip
Return
Aspect R at io
Noise Re du ct io n
Color Temperature
Screen
DTV MENU SETUP
CI Information item enables to obtain information about the Conditional Access, if
CI Module inserted.
Viaccess Conditional Access
Main menu
System information
Smart card management
Language setting
Press ‘OK’ to enter; Press ‘EXIT’ to return
LCN Sorting item can be changed between On and Off.
Software Update (USB) enables to update the software via USB input.
PICTURE
Select PICTURE section to adjust picture parameters. You may select Picture Mode,
Colour Temperature, Aspect Ratio, Noise Reduction and Screen.
Picture mode item can be changed between User, Dynamic, Standard and Mild.
You may adjust Contrast, Brightness, Color, Sharpness and Tint for User mode
Color Temperature mode item can be changed between User, Cold, Medium and Warm.
Aspect Ratio mode item can be changed between Auto, 4:3, 16:9, Zoom1 and Zoom2.
Noise Reduction item can be changed between reduce noise mode: Off, Low, Middle, High
and Default.
PICTURE
>
Move
MENU
Return
Hoppa ov
Picture Mode Standard
EXIT
ENTER
Select
Exit
>
Surrou nd S ou nd
AD Switc h
SPDIF MODE
Balanc e
On Time
Sleep Tim er
Auto Stand by
Tim e Zo ne L on do n GM T
DTV MENU SETUP
SOUND
Select SOUND section to adjust sound parameters. You may select Sound Mode, Balance,
Surround Sound, AD Switch and SPDIF MODE.
Sound Mode item can be changed between User, Standard, Music, Movie and Sports.
You may adjust 120Hz, 500Hz, 1,5kHz, 5kHz and 10kHz equalizer for User mode
Balance item can be adjusted from -50 to +50 for L and R sound balance. Default value is 0.
Surround Sound item can be changed between Off, Surround and SRS TruSurround XT.
AD Switch item can be changed between On and Off
SPDIF Mode item can be changed between PCM or Auto.
TIME
Select TIME section to select Clock, Off Time, On Time, Sleep Timer, Auto Standby, Time
Zone and Daylight Saving.
SOUND
>
Move
MENU
Return
Sound Mode Standard
EXIT
ENTER
Select
Exit
>
>
TIME
MENU
Clock -- -- -- --
Off Ti me O ff
Return
ENTER
Select
EXIT
>
Exit
Retu rn
MEN U
Retu rn
MEN U
Retu rn
MEN U
DTV MENU SETUP
In Clock submenu you can set the Date, Month, Year, Hour and Minute.
Date 01
Month 01
Year 1980
Hour 00
Minute 03
The Off Time submenu can be changed between Off, Once, Every Day, Mon.-Fri., Mon.Sat., Sat,-Sun. and Sunday. You may adjust Hour and Minute in this submenu.
The On Time submenu can be changed between Off, Once, Every Day, Mon.-Fri., Mon.Sat., Sat,-Sun. and Sunday. You may adjust Hour, Minute, Input Source, Channel and
Volume in this submenu.
Off Time Off
Hour 00
Minute 00
On Time Off
Hour 12
Minute 00
Radio
Volume 30
Retu rn
MEN U
Retu rn
MEN U
Retu rn
MEN U
DTV MENU SETUP
Sleep Timer item enables to set the sleep timer
(Off, 10min, 20min, 30min, 60min, 90min,
120min, 180min and 240min).
Auto Standby item enables to set the auto
standby function (Off, 3 Hour, 4 Hour and 5
Hour).
Sleep Timer
Off
10 min
20 min
30 min
60 min
90 min
Auto Stndby
Off
3 Hour
4 Hour
5 Hour
Time zone item enables to set the local time zone.
Time Zone
Canary GMT Rabat GMT Berlin GMT+1
Lisbon GMT Amsterdam GMT+1 Brussels GMT+1
London GMT
Beograd GMT+1 Budapest GMT+1
Daylight Saving item can be changed between On and Off.
OSD Language item enables to adjust OSD language.
OSD Language English
Audio languages
Subtitle Language
Hearing Impaired
Country
PVR File System
Restore Factory Default
OSD Animation
OSD Time
Return
ENTER
Select
EXIT
>
Exit
esky English Français
Dansk Espanol Hrv
Deutsch E Italiano
Audio Languages item enables to select a speech language of a program (available only in
DTV mode if program provider supports the multi language function)
esky English Français
Dansk Espanol Hrv
Deutsch E Italiano
Retu rn
MEN U
DTV MENU SETUP
Subtitle Language item enables to select a
subtitle language of a programme
esky English Français
Dansk Espanol Hrv
Deutsch E Italiano
MEN U
Retu rn
Hearing impaired item can be turned on or off.
Country item enables to chose user’s country.
PVR FILE SYSTEM
PVR REMOTE CONTROL KEY FUNCTIONS
PVR RECORD key: GOTO/RED
Record a program.
PVR PLAY key: MEDIA/I
Play the recorded programs in Media mode. Each time you
press this button the play speed is decreased till 16x time.
PVR REWIND key:
Rewinds at high speed. Each time you press this button the
rewind speed is increased.
PVR FAST FORWARD key:
Fast forward at high speed. Each time you press this button
the fast forward speed is increased.
PVR PAUSE key or PVR TSR KEY: II
Pause the play of recorded program or Start of the TSR
program. TSR records the program temporarily; this record
operation records the program permanently so you can
playback the recorded program at any time.
PVR PREVIOUS key: I
To go back to the previous recorded program.
PVR NEXT key: I
To go forward to the next recorded program.
PVR REPEAT key: REPEAT/YELLOW
To select repeat mode of recorded program.
PVR SEGMENT REPEAT key: A-B/GREEN
To select segment for repeat of recorded program.
PVR FUNCTIONS
Imagine coming home to your own personal library of
television programs, movies, and sports that you can watch
whenever it's convenient for you. It's TV for your schedule.
Country
UK Estonia Tunis
New Zealand Turkey Algeria
United Arab
Emirates
Moro cc o Eg yp t
DTV MENU SETUP
Select Disc C:
Check PVR File System Start
USB Disc Pass
Format Pass
Time Shift Size All
Speed 682 KB
PVR Record Limit 6Hr
MEN U
Retu rn
Pause of live television!
Rewind and replay programs so you don't miss a beat.
Record your favourite programs and view them as many times as you want.
The PVR File system menu description
Select Disk: select the disk as a PVR file system disk.
Check PVR File System: check the disk file format.
USB Disk: display the USB Disk activation status, "PASS" flag is activation.
Format: format the USB disk, creat PVR file system format to the USB disk.
Time Shift Size: Show about the TSR capacity.
Speed: read and write speed.
Max record time: time the biggest recording set-up time, unit is hours.
File System Size
PVR File System Type FAT32
PVR File System Size All
SD 52 Mins
HD 15 Mins
MEN U
Retu rn
Digital Video Record
Insert a USB disk, select Setup menu under the PVR File System item, select Check
PVR File System option, if not previously formatted USB disk, the system will automatically
prompt USB disk formatting.
PVR File System Size can accord customer need constitution, the capacity establishes
bigger, record time more long.
Pressing the [RED] key while having no menu will get into to record video function, until
selecting [Stop] in command line or USB disk has been full. You can display the command
line with RC button [ ].
■
OK
[00:00:42]
(0000:42:51)
15:46
DTV MENU SETUP
You can use the EPG menu, the program recording start and end time schedule to set.
RECORDER
1 YLE TV1
Start time
15 Minute
08 Hour
Dec Month
07 Date
End time
15 Minute
08 Hour
Dec Month
Mode AUTO
OK
While no menu to show, pressing the [MEDIA/I] key you can to switch to Media mode for
playing all recorded program. You can hint to operate according to the OSD menu at this
time, performance to have already recorded a program to look into or broadcast or delete
action.
Time Shift Record (TSR)
Time Shift Disk Size can according to customer need constitution, the capacity establishes
bigger, record time more long.
Back
Play FB FF Prev. Next Pause Stop
Pressing the [II] key while having no menu will get into record video function, until
pressing [ ] key or selecting command [Stop] in command line, or USB disk has been full.
■
Press [II] key repeatedly or select the command [Play] in command line to play.
Press [I] key or select the command [Next] in command line to go forward for 30 seconds.
Press [I] key or select the command [Prev.] in command line to go back for 30 seconds.
The process can be used button [/] or select the command [FB/FF] in command
line to play fast rewind / forward.
At this time press [ ] key or command [Stop] in command line will stop TSR function and
■
return to normal status.
Retu rn
MEN U
Retu rn
MEN U
DTV MENU SETUP
PVR operator attentions
USB disk at least 1GB in capacity; the length of record determines the capacity of disk.
High-speed USB devices with Hi Speed FS file system are recommended for multimedia
and PVR application.
Mobile HDD or high-speed USB stick are recommended for better performance in PVR and
time shift application.
Formatted, it will delete all the contents out, pay attention to preservation of important
information. If USB disk have some virus, format function would be failure.
PVR functionality is only effective at the next port DTV.
Has multiple partitions such as the use of mobile hard disk, you can PVR File System menu,
and select the corresponding letter PVR.
PVR File System menu of the Recorder will be limited
one-time burn the longest. That time will automatically
exit. Recording maximum time period set for 24 hours.
Signal formats for DTV video format (TS streams).
PVR function is only available in DTV source.
PVR files will be played in USB mode only if the file
size is larger than 5 Mb.
USB device must be compatible USB 2.0 HS
specification.
Restore factory defaults item enables to reset all
values to default.
OSD Animation enables or disables fade and slide
effects of OSD items and menus.
OSD Time item enables to set OSD time on screen
(15s, 30s and 60s).
ECO mode enables to select level of power saving.
Blue Screen item can be changed between On and Off
Please enter password
Clear Cancel
Please enter old password
Clear Cancel
Please enter new password
Confirm new password
DTV MENU SETUP
LOCK
Select LOCK section to Lock System, Set Password, Block Program, Parental Guidance.
LOCK
>
You can lock selected program or keyboard, set the parental guidance, if the item
Lock System is to On switched.
If you want to change the Lock System, you must
enter default password: 0000 first.
Move
MENU
Lock System
Set Password
Block Program
Parental Guidance Off
Return
ENTER
Select
>
EXIT
Exit
If you want to change default password, you must
select Set Password item.
Block program item enables to block access to
undesired programs.
Block Programs
1 BBC ONE
2 BBC TWO
7 BBC CHOICE
10 BBC FOUR
12 CBBC
Lock
OK
OK
MENU
DTV
DTV
DTV
DTV
DTV
Return
Retu rn
MEN U
1 08:10 Thurs.Sep 02 2010
No Information
576i DTV SD
No Program information
DTV MENU SETUP
Parental Guidance item enables to set the age
limit for programs.
ELECTRONIC PROGRAM GUIDE (EPG)
By pressing the EPG button on the remote
control, an Electronic Program Guide is
PROGRAMME GUIDE TIME
displayed. The EPG supplies information,
such as program lists, starts and end times
of allavailable channels. In addition, the
detailed information about the program is
often available in the EPG. (The availability
and the amount of program details will vary
depending on the broadcaster.)
1 BBC ONE No information
2 BBC TWO No information
7 BBC CHOICE No information
10 BBC FOUR No information
12 CBBC No information
RECORDINFO
OK
INFORMATION
To obtain more information about present and following events, you can
press [DISPLAY] button. Like previously, the following event is displayed by
pressing the [/] buttons (toggle between present and following events):
Parental Guidance
13 Jul 09:00
OK
Off
4
5
6
7
8
SCHEDULE
REMINDER
INDEX
Index
DTV Manu al Tu ni ng
ATV Ma nu al Tu ning
Progra mm e Ed it
LCN Sort in g
Softwa re U pd at e (U SB )
Retu rn
MEN U
ATV MENU SETUP
PLEASE NOTE, THAT IF SOME ITEMS ARE INACTIVE/UNAVAILABLE (GRAYED-OUT
IN THE OSD MENU) THEY ARE NOT DISCUSSED IN THIS CHAPTER. THESE ITEMS
ARE DETAILY DESCRIBED IN OTHER CHAPTERS.
This product can store up to 100-channel programs. You can select your favourite
channel through pressing [CH+/-] or number buttons, and you can scan and store all of the
channels through manual or automatic mode.
In ATV mode, press [SETUP] button on the remote control
Through pressing [/] button on the remote control, you can select LCD menu sections
(menu sections consist of “CHANNEL”, "PICTURE", "SOUND", "TIME", ”OPTION”, "LOCK").
Press [] or [OK] button to enter this menu section.
Press [] or [OK] button on the remote control to select the item in this menu section,
and then press [/] button to adjust parameter value. Press [SETUP] button to return to
main menu or [EXIT] button to exit from menu tables.
CHANNEL
Select CHANNEL section to adjust ATV channels.You may select Auto Tuning, ATV
Manual Tuning, Programme Edit, LCN Sorting and Software Update(USB).
Auto Tuning
CHANNEL
CHANNEL
>
Signal Information
CI Information
>
Move
Auto Tuning item enables to adjust channel setting automatically.
Select Auto Tuning item, press [] or [OK] button to enter Tune Type/Country selection menu.
Press [/] button to select Tune Type between DTV, DTV+ATV and ATV.
MENU
Return
ATV
UK Estonia Tunis
New Zealand Turkey Algeria
United Arab
Emirates
ENTER
Select
Moro cc o Eg yp t
EXIT
Exit
ATV MENU SETUP
Channel Tuning
TV : 0 Programme
DTV : 0 Programme
Radio : 0 Programme
Data : 0 Programme
0 %... (TV)
Press [ ] button to enter Country menu. Press
[/] button to select Country and
[OK] button to start auto searching.
You may select Storage To, Sound System, Current Channel, Search, Fine-Tune.
Storage To item Enables to select number of channel to store a program.
Current Channel item enables to select the channel number.
Sound System item enables to select sound system DK","I", L, BG .
Fine-Tune item enables to adjust the channel frequency accurately to make the sound
and picture effect better (or set channel frequency directly with number buttons).
Search item enables to adjust TV channel.
Programme Edit item enables to enter submenu to set
channel Delete, Rename, Move, Skip and add to
favourite list Fav.
Programme Edit
17 Digital
LCN Sorting item can be changed between On and Off.
Software Update (USB) enables to update the software
via USB input.
+
Return
DTV
Delete
OK
OK
Rename
FAV
FAV
Move
MENU
Skip
Return
ATV MENU SETUP
PICTURE
Select PICTURE section to adjust picture parameters. You may select Picture Mode, Color
Temperature, Aspect Ratio, Noise Reduction and adjust Contrast, Brightness, Color,
Sharpness, Tint.
Picture mode item can be changed between Personal, Dynamic, Standard and Mild.
Color Temperature mode item can be changed between Normal, Cold and Warm, User.
Aspect Ratio mode item can be changed between Auto, 4:3, 16:9, Zoom1 and Zoom2.
Noise Reduction item can be changed between reduce noise mode: Off, Low, Middle, High
and Default.
You may adjust Brightness, Contrast, Colour, Sharpness, Tint for User mode.
SOUND
Select SOUND section to adjust sound parameters. You may select Sound Mode, Balance,
Surront Sound, SPDIF Mode.
PICTURE
>
Move
MENU
SOUND
>
Sound Mode item can be changed between Personal, Standard, Music, Movie and Sports.
Balance item can be adjusted from -50 to +50 for L and R sound balance. Default value is 0.
Surround Sound item can be changed between Off, Surround and SRS TruSurround XT
SPDIF Mode item can be changed between Off, PCM or Auto.
Move
MENU
Picture Mode Standard
Color Temperature
Aspect Rat io
Noise Re du ct io n
Screen
Return
Return
ENTER
Select
Sound Mode Standard
Balance
Surrou nd S ou nd
AD Switc h
SPDIF MODE
ENTER
Select
EXIT
EXIT
>
Exit
>
Exit
Loading...
+ 158 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.