Page 1
RED3 INTEGRATED SERVER - SETUP GUIDE
USB PORTS
Used for keyboard,
mouse, other input
devices, flash
storage, etc.
SYSTEM STATUS
A - Power Indicator
B - Hard Drive Acvity
PORT ACTIVITY INDICATOR
16 or 24 Channels
A B
Front
POWER SUPPLY
120-240VAC
50-60 Hz
LAN PORTS
PoE Power Available = max 30W Each
(Complies with Class 3 PoE)
Global Power Available = max 288W (16
Ch.) 487W (24 Ch.)
WAN PORT/SFP PORT
Used for Dual Networks /
Advanced Network Sengs
VGA
Monitor
Display
HDMI
Monitor
Display
COMBO UPLINK
PORT
Twisted Pair (CAT6
Recommended)
or via SFP Port
eS ATA
Connecon for
external drive
USB 3.0 SFP
Port
Rear
Page 2
RED3 INTEGRATED SERVER - SETUP GUIDE
2 - Prior to Connecng to a Network1 - Packing Contents
Power Cord
3 - StartUp Wizard 4 - System Management
RED3 IS
Keyboard and Mouse
Rack Ears
Soware Manual
Power Cord
1. Connect a keyboard, monitor, and
mouse.
2. Connect the power supply to the
RED3 IS.
3. Log in to Windows (case sensive)
Username: Administrator
Password: Completeview!
4. Configure the Salient network,
computer name, and other relave
parameters for network
connecvely.
The default IP address for the RED3
switch is 192.168.1.50, but can be set
through the web interface.
To configure the RED3 integrated
switch, browse to hp://192.168.1.50.
Username: Admin
Password: Completeview!
(case sensive)
Cameras will connect to ports 1 to 16
or 1 to 24 depending on the unit.
Connect U2 to the client/corporate
network. The network address is
configured through the Windows
Control Panel. U1 is used as an
expansion port to the switch to
connect addional devices or switches.
Aer successfully logging into Windows, the CompleteView™ StartUp Wizard will automacally launch. The Wizard will step through the inial configuraon of CompleteView™ server.
Contact Salient support at hp://www.salientsys.com/support/contact-support/, or
1-844-SALIENT (1-844-725-4368) for assistance, if required. The system does come fully
licensed with 16 or 24 channels depending on the unit.
Loading...