SALDA RIS 1200 PE 3.0 EKO 3.0, RIS 1200 PE 9.0 EKO 3.0, RIS 700 PE 1.2 EKO 3.0, RIS 2500 PE 9.0 EKO 3.0, RIS 2500 PW EKO 3.0 Datasheet

RIS P EKO

EC

Application Ventilation of houses, oces or other heated premises (classrooms, apartments, conference rooms, etc.)

Description

AIR HANDLING UNITS

A1/L2

V [m3/h]

RIS P EKO 3.0 is a range of heat recovery units with high-eciency counter-ow heat exchangers and low
height. The units are designed for mounting under ceilings in order to save space. There are 5 sizes (airow
interval 420-2500 m3/h) with separate heaters available for dierent climate zones.
RIS P EKO 3.0 units have high overall energy savings due to the highly ecient heat recovery (up to 90%),
quiet and economical EC fans, eective low-pressure-drop lters, 100% motorized bypass dampers (for the
1900 and 2500 versions) and top-level of air tightness.
Energy eciency ensures full thermal comfort for passive houses, without an additional pre-heater at
temperatures above -5°C.
All the RIS P EKO 3.0 units are fully equipped with automatic controls. Optional external sensors for CO2 and
humidity and the event planning feature will help to control automatically your climate (demand-level control).
RIS P EKO 3.0 units are service-friendly and are easy to mount. Filter pollution may be identied by timers
or contamination controls (RIS 1200-2500 P EKO 3.0).
All units are supplied tested and ready to install.

Three remote control options are available:

Remote control

Features

Construction

1. Flex, Stouch or Ptouch remote controllers.

2. Building management system connections.

3. Remote control via PC MB-Gateway.

› Ideal for ceiling installations.
› Ready for Passive House technology: high eciency.
› Easy and quick mounting.
› Water/electrical heating options.
› Fully integrated plug-and-play control system.

› Frameless construction from double-skinned panels.
› Acoustic and thermal wall insulation: RIS 400–2500 P EKO 3.0 – 30/50 mm.
› RIS 400-700 P EKO 3.0 powder-coated white housing RAL 9016; RIS 1200–2500 P EKO 3.0 powder-coated

grey housing RAL 7040.

› Integrated electrical heater or optional duct-based water heater/cooler.
› Low-pressure-drop lters: F7/M5.
› Hinged door with locks grants easy access to internal components.
› Separate compartment on the side of the unit grants quick access to the control board (plug-and-play).
› Stainless steel condensate tray.
› Fitted with mounting brackets.
› Integrated anti-frost pressure switch (RIS 1200-2500 P EKO 3.0).

RIS 400 P E 0.9 EKO 3.0

Equipped with new PRV V2 control board

AHU with EC motors and ecient heat exchanger

Electrical heater power in kW

Heater type (E - integrated electrical heater; W - prepared for water heater)

Housing type (V - vertical, H - horizontal, P - ceiling)

AHU size according to maximum airow range m3/h

AHU with plate heat exchanger

64

The company reserves the right to make changes of technical data without prior notice

H2

H1H

H4

H3

W

F

W1

W2

H1H

W2

H4

G

D

F

W

W1

H2

H3

RIS P EKO

RIS 400P EKO - RIS 700P EKO 3.0 RIS 1200P EKO - RIS 2500P EKO 3.0

Dimensions [mm]

Unit W W1 W2 H H1 H2 H3 H4 F øD G D

RIS 400PE/PW EKO 3.0 1300 1361 650 768 670 158 330 98 31 200 - -

RIS 700PE/PW EKO 3.0 1380 1461 695 1069 970 160 350 99 40 250 - -

RIS 1200PE/PW EKO 3.0 1550 1655 780 1497 1397 172 390 100 52 - 500 250

RIS 1900PE/PW EKO 3.0 1750 1870 710 1955 1850 194 399 105 60 - 700 300

RIS 2500PE/PW EKO 3.0 1850 1970 720 2055 1950 244 499 105 60 - 700 400

AIR HANDLING UNITS

Optional accessories

Flex
Stouch
Ptouch

Unit

RIS 400PE EKO 3.0 + + - 81 CM230-1-F-L CM230-1-F-L - - - - 200 200 -

RIS 400PW EKO 3.0 + + 61 81 TF230 CM230-1-F-L - - + + 200 200 -

RIS 700PE EKO 3.0 + + - 81 CM230-1-F-L CM230-1-F-L - - - - 250 250 -

RIS 700PW EKO 3.0 + + 61 81 TF230 CM230-1-F-L - - + + 250 250 -

RIS 1200PE EKO 3.0 + + - - LM230A-TP LM230A-TP - 500x250 - - - - 500x250

RIS 1200PW EKO 3.0 + + 61 - NFA LM230A-TP 500x250 500x250 + + - - 500x250

RIS 1900PE EKO 3.0 + + - - LM230A-TP LM230A-TP - 700x400* - - - - 700x400*

RIS 1900PW EKO 3.0 + + 61 - NFA LM230A-TP 700x400* 700x400* + + - - 700x400*

RIS 2500PE EKO 3.0 + + - - LM230A-TP LM230A-TP - 700x400 - - - - 700x400

RIS 2500PW EKO 3.0 + + 61 - NFA LM230A-TP 700x400 700x400 + + - - 700x400

MB-

Gateway

Accessories

Network Module

MB­Gateway

Humidity sensor

Ptouch Stouch p. 177 p. 175 p. 176

p. 178

Thermic water
valve actuator

S-1141

S-RC02-F2

S-KFF-U

SSB

Heating

Control panelRemote controller

FLEX

Actuator
for dampers

SSB

CoolingSPSupply

Remote controller

Water heater coil

SP

Exhaust

Pressure
transmitter

S-1141

p. 179

Damper for
rectangular duct

SVS

SSK
SKS

*necessary to order ange adapter STP 700x400-700x300

CO2 sensor

S-RC02-F2

Rectangular
duct silencer

p. 180

RMG

Shut-o damper

VVP/

VXP

SKG
AKS

AP

AVS
AVA

EKA NV

PH

Circular
duct silencer

EKS NV PH

S-KFF-U

Mounting clamps

AP

p. 181

p. 219

SSB p. 195

Heating coil Mixing point

AVS RMG

p. 185 p. 196

The company reserves the right to make changes of technical data without prior notice

SP p. 210

Circular
duct water cooler

AVA VVP/VXP STP

p. 193 p. 197 p. 220

SVS

p. 190

Electrical duct
pre-heater

EKS
NV PH

SSK p. 215 p. 212 p. 216

Electrical duct
pre-heater

EKA
NV PH

SKS SKG AKS

p. 213

p.201 p. 203

2 and 3
way valves Flange adapter

65

RIS P EKO

50%

50%

RIS 400PE EKO 3.0

Supply air

Δ Pstat [Pa]Δ Pstat [Pa]

Exhaust air

Performance

Power consumption

V [l/s]

V [m3/h]

V [l/s]

P [W]

P [W]

RIS 400PE EKO 3.0

AIR HANDLING UNITS

Specic fan power

Δ Pstat [Pa]

total power for supply & exhaust fans kW

SFP=

Temperature eciency

η [%]

air ow m3/h

x 3600

View from inspection side

Extract airExhaust air Outdoor air Supply air

Article No. Version

GAGRIS1747_0017A 400PE 0.9 EKO 3.0 Integrated electrical heater
GAGRIS1746_0017A 400PE 1.6 EKO 3.0 Integrated electrical heater
GAGRIS1692_0016A 400PE 3.0 EKO 3.0 Integrated electrical heater

V [m3/h]

V [l/s]

Electrical heater

EC fans

exhaust

supply

Thermal eciency up to* 90%
Motorized by-pass +
Max power consumption
Control board PRV V2
Filter class
Housing insulation, mineral wool
Colour
Weight (net, without packing)
Comply with ERP 2016; 2018
Operation indoors
Fresh air temperature limits**
Housing protection class IP

phase/voltage [50Hz/VAC]

phase/voltage [50Hz/VAC]

power/current [kW/A]

fan speed [min-1]

power/current [kW/A]

fan speed [min-1]

exhaust/supply

RAL white

0.9 EKO 3.0 1.6 EKO 3.0 3.0 EKO 3.0

~1, 230 ~1, 230 ~1, 230

[kW]

[kW/A]

[mm]

[kg]

°C

0,9 1,6 3,0

0,085/0,73

0,085/0,73

1,07/5,50 1,77/8,50 3,17/14,50

* Calculated according EN 13141-7.
**For temperatures lower than recommended, use electrical pre-heater
to ensure balanced operation.

V [m3/h]

V [l/s]

~1, 230

3200

3200

M5/F7

30

9016

74

-5 - +40
34

66

Temperature eciency (balanced mass ow) EN 13141-7:

Lwa total,

dB(A)

125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz

V [m3/h]

RIS 400PE EKO 3.0

Supply 67 54 59 64 58 57 54 47
Extract 58 48 50 53 51 48 46 41
Surrounding 51 40 43 46 45 40 39 36
Measured at 395 m3/h, 100 Pa

The company reserves the right to make changes of technical data without prior notice

Extract air = 20°C/60%RH

Outdoor air = -7°C / 2°C / 7°C

LWA, dB(A)

RIS P EKO

50%

50%

RIS 400PW EKO 3.0

Supply air

Δ Pstat [Pa]Δ Pstat [Pa]

Exhaust air

Performance

Power consumption

V [l/s]

V [m3/h]

V [l/s]

P [W]

P [W]

AIR HANDLING UNITS

RIS 400PW EKO 3.0

Specic fan power

Δ Pstat [Pa]

total power for supply & exhaust fans kW

SFP=

air ow m3/h

Temperature eciency

η [%]

x 3600

View from inspection side

Extract airExhaust air Outdoor air Supply air

Article No. Version
GAGRIS1748_0019A 400PW EKO 3.0 Optional water heater

V [m3/h]

Water heater (optional) AVS 200

V [l/s]

Fans phase/voltage [50Hz/VAC] ~1, 230
exhaust power/current [kW/A] 0,085/0,73

fan speed [min-1] 3200

supply power/current [kW/A] 0,085/0,73

fan speed [min-1] 3200
Thermal eciency up to* 90%
Motorized by-pass +
Max power consumption [kW/A] 0,17/1,50
Control board PRV V2
Filter class exhaust/supply M5/F7
Housing insulation, mineral wool [mm] 30
Colour RAL white 9016
Weight (net, without packing) [kg] 73
Comply with ERP 2016; 2018
Operation indoors
Fresh air temperature limits** °C -5 - +40
Housing protection class IP 34

* Calculated according EN 13141-7.
**For temperatures lower than recommended, use electrical pre-heater
to ensure balanced operation.

V [m3/h]

V [l/s]

400PW EKO 3.0

Temperature eciency (balanced mass ow) EN 13141-7:

Outdoor air = -7°C / 2°C / 7°C

LWA, dB(A)

V [m3/h]

RIS 400PW EKO 3.0

Supply 67 54 59 64 58 57 54 47
Extract 58 48 50 53 51 48 46 41
Surrounding 51 40 43 46 45 40 39 36
Measured at 395 m3/h, 100 Pa

Lwa total,

dB(A)

125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz

The company reserves the right to make changes of technical data without prior notice

Extract air = 20°C/60%RH

67

RIS P EKO

200

180

160

140

120

100

80

60

40

20

0

200

180

160

140

120

100

80

60

40

20

0

RIS 700PE EKO 3.0

Supply air

Δ Pstat [Pa]Δ Pstat [Pa]

Exhaust air

Performance

Power consumption

V [l/s]

V [m3/h]

V [l/s]

P [W]

P [W]

RIS 700PE EKO 3.0

AIR HANDLING UNITS

Specic fan power

Δ Pstat [Pa]

total power for supply & exhaust fans kW

SFP=

Temperature eciency

η [%]

68

Extract airExhaust air Outdoor air Supply air

Article No. Version

GAGRIS1737_0008A 700PE 1.2 EKO 3.0 Integrated electrical heater
GAGRIS1736_0007A 700PE 3.0 EKO 3.0 Integrated electrical heater

GAGRIS1693_0005B 700PE 4.5 EKO 3.0 Integrated electrical heater

V [m3/h]

V [l/s]

Electrical heater

EC fans

exhaust

supply

Thermal eciency up to* 90%
Motorized by-pass +
Max power consumption
Control board PRV V2
Filter class
Housing insulation, mineral wool
Colour
Weight (net, without packing)
Comply with ERP 2016;2018
Operation indoors
Fresh air temperature limits**
Housing protection class IP

phase/voltage [50Hz/VAC]

phase/voltage [50Hz/VAC]

power/current [kW/A]

fan speed [min-1]

power/current [kW/A]

fan speed [min-1]

exhaust/supply

RAL white

* Calculated according EN 13141-7.
**For temperatures lower than recommended, use electrical pre-heater
to ensure balanced operation.

air ow m3/h

The company reserves the right to make changes of technical data without prior notice

x 3600

V [m3/h]

V [l/s]

V [m3/h]

Temperature eciency (balanced mass ow) EN 13141-7:

RIS 700PE EKO 3.0

Supply 75 64 66 68 70 66 60 59
Extract 62 53 55 57 56 52 49 45
Surrounding 56 45 47 50 50 47 43 42
Measured at 700 m3/h, 100 Pa

Lwa total,

dB(A)

View from inspection side

1.2 EKO 3.0 3.0 EKO 3.0 4.5 EKO 3.0

~1, 230 ~1, 230 ~3, 400

[kW]

[kW/A]

[mm]

[kg]

°C

125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz

1,2 3,0 4,5

~1, 230

0,168/1,4

3230

0,168/1,4

3230

1,54/8,34 3,34/15,84 4,84/9,3

M5/F7

30

9016

103,5 104 104,5

-5 - +40
34

Extract air = 20°C/60%RH

Outdoor air = -7°C / 2°C / 7°C

LWA, dB(A)