Salamander Designs SU40RMC-B User Manual
SYNERGY
RACK MOUNT
KIT TO ACCOMMODATE DOOR
1x
5/32” Hex Key - (400-080)
1x
1/8” Hex Key - (400-070)
12x
2x
300-520
300-518
OPTION: INSTALLING GEAR FORWARD
Rack rails may also be installed with the flange forward in
applications the door is not desired and additional cabinet
depth is needed.
A. Place the 1/2” Button Head Screw (300-485) in the
holes of rack mount rail and hinge bracket and loosely
screw to Flat-nut (300-560).
Note: Rackmount brackets that have a triangle
must locate at the top.
B. Slide Rack Mount Rail into position with the Flat Nuts
sliding into the channel as shown. After bracket is in
position tighten all screws with hex key.
C. Snap door onto hinge bases align top and
bottom gap and tighten.
(300-485)
1/2” Button Head
Screw
(301-360)
Mounting Screw
8x
(300-560) - Flat Nut
Limited Warranty
For five full years Salamander Designs Ltd. will repair or
replace, at our option, any product defective in materials
or craftsmanship. Salamander Designs Ltd. will not be
responsible for any damage to or destruct ion of other
equipment consequential to our equipment failure. Defective
product must be given Return Authorization and is t o be
returned to the factory prepaid, in the original carton and
packing material. Any damage incurred in a shipment not
in original packaging shall be the responsibility of the owner.
Warranty repairs will be returned prepaid, via UPS within
the continental U.S.A. only.
www.SalamanderDesigns.com
800-535-5659
For 15 and 21U rails:
D. Install header panel at the top same
location of rack mount.
Doc No. 500-455 / v11.10 ©2010 Salamander Designs Ltd.
1x
5/32” Hex Key - (400-080)
1x
1/8” Hex Key - (400-070)
SYNERGY
RACK MOUNT
6x
(300-518)
3/8” Button Head
Screw
OPTION: INSTALLING GEAR FORWARD
Rack rails may also be installed with the flange forward in applications the door is not
desired and additional cabinet depth is needed.
For Installing in Synergy Cabinets:
A
Place the 1/2” Button Head Screw (300-485) in the holes of each bracket and attach loosely
with Flat Nut. Note: For assembled cabinets use the Drop-In Nut in place of the Flat Nut.
For Installing in Chameleon Cabinets:
Use the Drop-In Nuts (300-565) and the shorter 3/8” Button Head Screws (300-518).
B
Insert Flat Nut s or Drop-In Nuts into the channels (Use the Front Side Channel for
Chameleon). Secure screws with Hex Key.
Use standard 10-32 mounting screws to mount equipment on rack rails.
C
D
For 15U & 21U Rails, attach header panel at the top of the rack rail.
>
300-565
or
>
300-560
<
300-485 or
300-518
8x
(300-485)
1/2” Button Head
Screw
8x
(300-560) - Flat Nut
12x
(301-360)
Mounting Screw
4x
(300-565)
Drop-In Nut
Limited Warranty
For five full years Salamander Designs Ltd. will repair or
replace, at our option, any product defective in materials
or craftsmanship. Salamander Designs Ltd. will not be
responsible for any damage t o or dest ruction of other
equipment consequential to our equipment failure. Defective
product must be given Return Authorization and is to be
returned to the factory prepaid, in the original carton and
packing material. Any damage incurred in a shipment not
in original packaging shall be the responsibility of the owner.
Warranty repairs will be returned prepaid, via UPS within
the continental U.S.A. only.
Note: Use the front
side channel for
Chameleon Cabinets
NOTES
Installing Gear Forward
Rack rails may also be installed with the
flange forward in applications the door is
not desired and additional cabinet depth is
needed.
CABINET
FRONT
For Small Segment Use Behind Door
Install brackets away from door hinges.
www.SalamanderDesigns.com
800-535-5659
Doc No. 500-455 / v11.10 ©2010 Salamander Designs Ltd.
FRONT
Loading...