Salamander Designs SAMP-B User Manual

AMP STAND ASSEMBLY

4x

Attaching Feet

1.

Slip a bolt through the bottom shelf and

A

into each foot.

Tighten using the provided hex wrench.

B

Don’t tighten completely until feet are
angled in appropriate direction (Step 2).

Adjust Feet Angles

2 .

The polished feet can be arranged in a
variety of angles and orientations. The
recommended setup for maximum stabili­ty is for all feet to point out in a 45°
direction to the bottom shelf. However the
feet can be arched in through a 90°
range of
motion. Be sure to tighten bolts complete­ly when finished.

ranty

Limited W

For five full years Salamander Designs Ltd will repair or replace, at our option, any product defective in materials or craftsmanship. Salamander Designs Ltd. will not be
responsible for any damage to or destruction of other equipment consequential to our equipment failure. Defective product must be given Return Authorization and is to be
returned to the factory prepaid, in the original carton and packing material. Any damage incurred in a shipment not in original packaging shall be the responsibility of the
owner. Warranty repairs will be returned prepaid, via UPS within the continental U.S.A. only.

Salamander Designs Ltd. 800-535-5659 • www.salamanderdesigns.com

ar