Page 1
interTRAX™ Mobile
Hardware Setup
2012
Copyright © 2003 - 2012 by Salamander Technologies, Inc.
Protected by US Patents
5,573,278; 5,596,652; 5,793,882; 6,761,312; 7,191,934
Page 2
2
Contents
Contents .............................................................................................................................. 2
1 Windows Mobile™ 6.5 ............................................................................................... 3
Salamander Supported Mobile Units .............................................................................. 3
Mobile Unit Setup ........................................................................................................... 3
Clock & Alarms .......................................................................................................... 4
Power .......................................................................................................................... 5
Network Connections.................................................................................................. 7
Brightness ................................................................................................................. 11
About......................................................................................................................... 13
Task Manager............................................................................................................ 14
Screen ........................................................................................................................ 15
2 Windows Mobile™ 6.1 ............................................................................................. 17
Salamander Supported Mobile Units ............................................................................ 17
Mobile Unit Setup ......................................................................................................... 17
Backlight ................................................................................................................... 18
About......................................................................................................................... 21
Clock & Alarms ........................................................................................................ 22
Task Manager............................................................................................................ 23
Power ........................................................................................................................ 24
Screen ........................................................................................................................ 26
Network Connections................................................................................................ 27
3 Windows Mobile™ 5 ................................................................................................ 31
Salamander Supported Mobile Units ............................................................................ 31
Mobile Unit Setup ......................................................................................................... 31
Brightness ................................................................................................................. 32
About......................................................................................................................... 35
Clock & Alarms ........................................................................................................ 36
Memory ..................................................................................................................... 37
Power ........................................................................................................................ 39
Screen ........................................................................................................................ 40
Network Connections................................................................................................ 41
4 Windows Mobile™2003 – V3.6 or below ................................................................ 44
Salamander Supported Mobile Units ............................................................................ 44
Mobile Unit Setup ......................................................................................................... 44
Brightness ................................................................................................................. 45
About......................................................................................................................... 48
Clock & Alarms ........................................................................................................ 49
Memory ..................................................................................................................... 50
Radio Power .............................................................................................................. 52
Screen ........................................................................................................................ 53
Network Connections................................................................................................ 54
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 3
3
1 Windows Mobile™ 6.5
MC75
MC55
Salamander Supported Mobile Units
Microsoft® Windows Mobile™ Version 6.5
For questions regarding the MU refer to the Symbol Product User Guide.
Mobile Unit Setup
Turn on the Mobile Unit
The Main screen will appear
Tap on the Settings icon
Note:
The following screen shots are from a Symbol MC55. While the screen shots that you
are seeing may be slightly different depending on the Mobile Unit that you are using, the
functions are the same.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 4
4
Clock & Alarms
Tap on Clock & Alarms icon
The Clock & Alarms screen will appear.
Tap on the each drop down box to set the
following:
Time Zone (extremely important)
The Time Zone must be accurate on all MUs
used at an incident in order for the information
to interface appropriately.
Date
Time
Note: Date and Time are automatically set to
match a computer’s clock each time the MU is
placed in a cradle and ActiveSync/Windows
Mobile Device Center is run. The Time Zone is
not changed.
Tap in the lower right corner and the Settings screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 5
5
Power
Tap on the Power icon
This screen displays the current status of the
Main battery
Tap on Advanced in the top right corner
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 6
6
When you check the box for On battery power:
Turn off device if not used for, a dropdown will
appear that allows you to choose a preset idle
time in order to extend the battery life
Set at 5 minutes
When you check the box for On external power:
Turn off device if not used for, a dropdown will
appear that allows you to choose a preset idle
time in order to extend the battery life
Set at 30 minutes
Tap in the lower right corner and the Settings screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 7
7
Network Connections
Tap on the Connections icon
Tap on the Connections icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 8
8
Tap on Set up my proxy server
Check the box for This network connects to the
Internet.
Tap in the lower right corner
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 9
9
Tap on Advanced in the upper right hand corner
Tap on Select Networks
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 10
10
The Network Management screen will appear
Tap on the dropdown lists and choose My Work
Network
Tap in the lower right corner twice.
Tap on the back arrow on the Connections screen and the Settings screen will appear.
Tap on the System icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 11
11
Brightness
Adjust the brightness of your Mobile Unit to assure the best possible screen viewing
quality.
Tap on the Backlight icon
The Battery Power screen will appear
When you check the box for Disable
backlight if device is not used for, a
dropdown box will appear that allows you to
choose a preset idle time in order to extend
the battery life.
Set at 3 min
Check the box for Enable backlight when a
button is pressed or the screen is tapped
Tap on the Brightness in the top left corner
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 12
12
The Brightness screen will appear.
Move the slider to the center of the scale
NOTE: While full brightness is easier to read, a
setting of 2 conserves battery power
Tap on External in the upper left corner
The External Power screen will appear
When you check the box for Disable backlight
if device is not used for, a dropdown box will
appear that allows you to choose a preset idle
time in order to extend the battery life.
Set at 1 min
Check the box for Enable backlight when a
button is pressed or the screen is tapped
Tap on in the bottom right corner
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 13
13
About
Tap on the About icon
The Version screen will appear
MU Operating System and Version
Tap on Device ID in the upper right corner
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 14
14
Type in the Device Name using the software keyboard
6-8 characters
should be significant
it will be used for identification
purposes during future functions
Tap on in the lower right corner
Task Manager
Tap on the Task Manager icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 15
15
The Task Manager screen will appear
Any or all of these programs can be stopped if the
speed of the MU is slow
Tap on in the lower right corner
Screen
Tap on the Screen icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 16
16
Orientation
The MU must be set to Portrait
Align Screen
This allows you to align the screen using a target
tapping process
Tap in the lower upper right corner
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 17
17
2 Windows Mobile™ 6.1
MC95xx
MC75
Salamander Supported Mobile Units
Microsoft® Windows Mobile™ Version 6.1
For questions regarding the MU refer to the Symbol Product User Guide.
Mobile Unit Setup
Turn on the Mobile Unit
The Main screen will appear
Note:
The following screen shots are from a Symbol MC9596. While the screen shots that you
are seeing may be slightly different depending on the Mobile Unit that you are using, the
functions are the same.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 18
18
Backlight
Adjust the brightness of your Mobile Unit prior to proceeding to assure the best possible
screen viewing quality.
Tap on in the upper left corner of the Main screen
The Start Menu Options screen will appear
Tap on Settings
The Settings - Personal Tab screen will appear
Tap on the System Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 19
19
The Settings – System Tab screen will appear
Tap on the Backlight icon
The Settings - Backlight – Battery Power Tab screen will appear
When you check the box for Disable
backlight if device is not used for, a
dropdown box will appear that allows you to
choose a preset idle time in order to extend
the battery life.
Set at 3 min
Check the box for Enable backlight when a
button is pressed or the screen is tapped
Tap on the External Power Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 20
20
The Settings - Backlight – External Power Tab screen will appear
When you check the box for Disable backlight
if device is not used for, a dropdown box will
appear that allows you to choose a preset idle
time in order to extend the battery life.
Set at 1 min
Check the box for Enable backlight when a
button is pressed or the screen is tapped
Tap on the Brightness Tab
The Settings - Backlight – Brightness Tab screen will appear
Move the slider to the center of the scale
NOTE: While full Brightness is easier to
read, a setting of 2 conserves battery power.
Tap in the upper right corner and the Settings – System Tab screen will appear.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 21
21
About
Settings – System Tab screen
Tap on the About icon
The Settings - About - Version Tab screen will appear
MU Operating System and Version
Tap on the Device ID Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 22
22
The Settings - About - Device ID tab screen will appear
Tap on to use the software keyboard
Type in the Device Name
6-8 characters
should be significant
it will be used for identification purposes
during future functions
Tap in the upper right and the Settings – System Tab screen will appear
Clock & Alarms
Settings – System Tab screen
Tap on the Clock & Alarms icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 23
23
The Settings - Clock & Alarms - Time Tab screen will appear.
Tap on the Home radio button
Time Zone (extremely important)
The Time Zone must be accurate on all MUs used
at an incident in order for the information to
interface appropriately.
Date
Time
Note: Date and Time are automatically set to
match a computer’s clock each time the MU is
placed in a cradle and ActiveSync is run. The Time
Zone is not changed.
Tap in the upper right corner and the Settings – System tab screen will appear.
Task Manager
Settings – System Tab screen
Tap on the Task Manager icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 24
24
The Task Manager screen will appear
Any or all of these programs can be stopped if the
speed of the MU is slow.
.
Tap in the upper right corner and the Settings – System Tab screen will appear
Power
Settings – System Tab screen
Tap on the Power icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 25
25
The Settings - Power –Battery Tab screen will appear
This screen displays the current status of the
Main battery
Tap on the Advanced Tab
The Settings - Power – Advanced tab screen will appear
When you check the box for On battery power:
Turn off device if not used for dropdown will
appear that allows you to choose a preset idle time
in order to extend the battery life
Set at 5 minutes
When you check the box for On external power:
Turn off device if not used for dropdown will
appear that allows you to choose a preset idle time
in order to extend the battery life
Set at 30 minutes
Tap in the upper right corner and the Settings – System Tab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 26
26
Screen
Settings – System tab screen
Tap on the Screen icon
The Settings - Screen –General Tab screen will appear
Orientation
The MU must be set to Portrait
Align Screen
This allows you to align the screen using a target
tapping process
Tap in the upper right corner and the Settings – SystemTab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 27
27
Network Connections
Settings – System Tab screen
Tap on the Connections Tab
The Settings - Connections tab screen will appear
Tap on the Connections icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 28
28
The Settings - Connections – Tasks Tab screen will appear
Tap on Set up my proxy server
Check the box for This network connects to the Internet
Tap in the upper right corner and the Settings - Connections – Tasks Tab screen
will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 29
29
Tap on the Advanced Tab
The Settings - Connections – Advanced Tab screen will appear
Tap on Select Networks
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 30
30
The Settings - Network Management screen will appear
Tap on the dropdown lists and choose My
Work Network.
Tap in the upper right corner three times to return to the Main Screen.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 31
31
3 Windows Mobile™ 5
MC9090
MC70
Salamander Supported Mobile Units
Microsoft® Windows Mobile™ Version 5
For questions regarding the MU refer to the Symbol Product User Guide.
Mobile Unit Setup
Turn on the Mobile Unit
The Main screen will appear
Note:
The following screen shots are from a Symbol MC70. While the screen shots that you
are seeing may be slightly different depending on the Mobile Unit that you are using, the
functions are similar.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 32
32
Brightness
Adjust the brightness of your Mobile Unit prior to proceeding to assure the best possible
screen viewing quality.
Tap on in the upper left corner of the Main screen.
The Start Menu Options screen will appear
Tap on Settings
The Settings - Personal Tab screen will appear
Tap on the System Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 33
33
The Settings - System Tab screen will appear
Tap on the Backlight icon
The Backlight – Battery Power Tab screen will appear.
Tap on the Brightness Tab
Move the slider to the center of the scale
Note: While full Brightness is easier to read, a
setting of conserves battery power
Tap on the Battery Power Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 34
34
The Settings - Backlight - Battery Power Tab screen will appear
When you check the box for Disable backlight if
device is not used for, a dropdown will appear that
allows you to choose a preset idle time in order to
extend the battery life
Set at 3 min
Check the box for Enable backlight when a button
is pressed or the screen is tapped
Tap on the External Power Tab
The Settings – Backlight - External Power Tab screen will appear.
When you check the box for Disable backlight if
device is not used for, a dropdown will appear that
allows you to choose a preset idle time in order to
extend the battery life
Set at 1 min
Check the box for Enable backlight when a button is
pressed or the screen is tapped
Tap in the upper right corner and the Settings - System Tab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 35
35
About
Settings - System Tab screen
Tap on the About icon
The Settings - About - Version Tab screen will appear
MU Operating System and Version
Tap on the Device ID Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 36
36
The Settings - About - Device ID Tab screen will appear
Tap on to use the soft keyboard
Type in the Device Name
6-8 characters
should be significant
it will be used for identification purposes
during future functions
Tap in the upper right corner and the Settings - System Tab screen will appear
Clock & Alarms
Settings - System Tab screen
Tap on the Clock & Alarms icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 37
37
The Settings – Clock & Alarms - Time Tab screen will appear
Tap on the Home radio button
Time Zone (extremely important)
The Time Zone must be accurate on all MUs used
at an incident in order for the information to
interface appropriately
Date
Time
Note: Date and Time are automatically set to match
a computer’s clock each time the MU is placed in a
cradle and ActiveSync is run. The Time Zone is
not changed.
Tap in the upper right corner and the Settings - System Tab screen will appear
Memory
Settings - System Tab screen
Tap on the Memory icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 38
38
The Settings - Memory - Main Tab screen will appear
Tap on the Running Programs Tab
The Settings – Memory - Running Programs Tab screen will appear
Any or all of these programs can be
stopped if the speed of the MU
is slow
Tap in the upper right corner and the Settings - System Tab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 39
39
Power
Settings - System Tab screen
Tap on the Power icon
The Settings - Power – Battery Tab screen will appear
This screen displays the current status of the Main
battery
Tap on the Advanced Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 40
40
The Settings - Power – Advanced Tab screen will appear
When you check the box for
On battery power: Turn off device if not used for
dropdown will appear that allows you to choose a
preset idle time in order to extend the battery life
Set at 5 Minutes
When you check the box for On external power:
Turn off device if not used for dropdown will
appear that allows you to choose a preset idle
time in order to extend the battery life
Set at 30 Minutes
Tap in the upper right corner and the Settings - System Tab screen will appear
Screen
Settings - System Tab screen
Tap on the Screen icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 41
41
The Settings - Screen - General Tab screen will appear
Orientation
The MU must be set to Portrait
Align Screen
This allows you to align the
screen using a target tapping process
Tap in the upper right corner and the Settings - System Tab screen will appear
Network Connections
Settings - System Tab screen
Tap on the Connections Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 42
42
The Settings - Connections Tab screen will appear
Tap on the Connections icon
The Settings - Connections – Tasks Tab screen will appear
Tap on the Advanced Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 43
43
The Settings - Connections - Advanced Tab screen will appear
Tap on Select Networks
The Settings - Network Management screen will appear
Tap on dropdown lists and choose My Work
Network
Tap in the upper right corner three times to return to the Main Screen.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 44
44
4 Windows Mobile™2003 – V3.6 or below
MC9063
MC50
Salamander Supported Mobile Units
Microsoft® Windows Mobile™ 2003
For questions regarding the MU refer to the Symbol Product User Guide.
Mobile Unit Setup
Turn on the Mobile Unit
The Main screen will appear
Note:
The following screen shots are from a Symbol MC50. While the screen shots that you
are seeing may be slightly different depending on the Mobile Unit that you are using, the
functions are the similar.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 45
45
Brightness
Adjust the brightness of your Mobile Unit prior to proceeding to assure the best possible
screen viewing quality.
Tap on in the upper left corner of the Main screen.
The Start Menu Options screen will appear
Tap on Settings
The Settings - Personal Tab screen will appear
Tap on the System Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 46
46
The Settings - System Tab screen will appear
Tap on the Brightness icon
The Brightness - Brightness Tab screen will appear
Move the slider to the center of the scale
Note: While full Brightness is easier to
read, a setting of 50% conserves battery power
Tap on the Battery Power Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 47
47
The Settings - Brightness - Battery Power Tab screen will appear
When you check the box for Dim if device is idle
for more than, a dropdown will appear that
allows you to choose a preset idle time in order to
extend the battery life
Set at 3 min
Tap on the External Power Tab
The Settings – Brightness - External Power Tab screen will appear.
When you check the box for Dim if device is
idle for more than, a dropdown will appear
that allows you to choose a preset idle time in
order to extend the battery life
Set at 30 sec
Tap in the upper right corner and the Settings - System Tab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 48
48
About
Settings - System Tab screen
Tap on the About icon
The Settings - About - Version Tab screen will appear
MU Operating System and Version
Tap on the Device ID Tab
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 49
49
The Settings - About - Device ID Tab screen will appear
Tap on to use the soft keyboard
Type in the Device Name
6-8 characters
should be significant
it will be used for identification purposes
during future functions
Tap in the upper right corner and the Settings - System Tab screen will appear
Clock & Alarms
Settings - System Tab screen
Tap on the Clock & Alarms icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 50
50
The Settings - Clock & Alarms - Time Tab screen will appear
Tap on the Home radio button
Time Zone (extremely important)
The Time Zone must be accurate on
all MUs used at an incident in order
for the information to interface
appropriately
Date
Time
Note: Date and Time are automatically
set to match a computer’s clock each time
the MU is placed in a cradle and ActiveSync is run. The Time Zone is not changed.
Tap in the upper right corner and the Settings - System Tab screen will appear
Memory
Settings - System Tab screen
Tap on the Memory icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 51
51
The Settings - Memory - Main Tab screen will appear
Tap on the Running Programs Tab
The Settings – Memory - Running Programs Tab screen will appear
Any or all of these programs can be stopped
if the speed of the MU is slow
Tap in the upper right corner and the Settings - System Tab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 52
52
Radio Power
Settings - System Tab screen
Tap on the Radio Power icon
The Settings - Radio Power Settings screen will appear
The box must be checked for wireless
communication
Tap in the upper right corner and the Settings - System Tab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 53
53
Screen
Settings - System Tab screen
Tap on the Screen icon
The Settings - Screen - General Tab screen will appear
Orientation
The MU must be set to Portrait
Align Screen
This allows you to align the screen using a target
tapping process
Tap in the upper right corner and the Settings - System Tab screen will appear
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 54
54
Network Connections
Settings - System Tab screen
Tap on the Connections Tab
The Settings - Connections Tab screen will appear
Tap on the Connections icon
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 55
55
The Settings - Connections – Tasks Tab screen will appear
Tap on the Advanced Tab
The Settings - Connections - Advanced Tab screen will appear
Tap on Select Networks
Mobile Hardware Setup Guide Rev. 1 (11-12)
Page 56
56
The Settings - Network Management screen will appear
Tap on dropdown lists and choose My
Work Network
Tap in the upper right corner three times to return to the Main Screen.
Mobile Hardware Setup Guide Rev. 1 (11-12)
Loading...