Sailor SC4150 Installation Manual

SAILOR SC4150
Installation Manual
Single-channel Unit
Introduction
Congratulations on your new Iridium handset or PSTN (Public Switched T elephone Network) telephone.
Your Iridium system is a modular system that consists of an antenna, transmitter/receiver , handset and optional PSTN telephone/PBX (Private Branch Exchange) switchboard.
You can operate the Iridium system in voice mode from a handset and/or PSTN telephone. To the system you can connect up to five handsets and one PSTN telephone or PBX switchboard.
Sailor marine equipment is specially designed for the extremely rugged conditions on board a ship, based on more than 50 years of experience with all kinds of boats, from small pleasure crafts, over fishing boats working under all climatic conditions, to the biggest ships.
EuroCom Industries A/S (ECI) develops and produces high­technology maritime communications equipment under the brandname Sailor .
ECI is one of the world’s largest suppliers of communications equipment for the maritime segment, a position which has been maintained by means of constant and extensive product develop­ment.
The Sailor products are sold through a global network with more than 60 qualified and trained distributors.
Please note
Any responsibility or liability for loss or damage in connection with the use of this product and the accompanying documentation is disclaimed. The information in this manual is furnished for informa­tional use only, is subject to change without notice, may contain errors or inaccuracies, and represents no commitment whatsoever. This agreement is governed by the laws of Denmark.
Doc. no.: M4150GB0 Issue: G/0303
1
Installation
IRIDIUM
0225
Contents
1 Configuration of Single-Channel Unit.............................................................................................................. 2
2 Installation .......................................................................................................................................................... 3
2.1 Cable Overview .................................................................................................................................................... 3
2.1.1 Scanbus Termination............................................................................................................................................ 5
2.2 Where to Place the Satellite Transceiver Box ..................................................................................................... 7
2.3 How to Mount the Satellite Transceiver Box........................................................................................................ 8
2.4 How to Put on the Finishing Cover ...................................................................................................................... 9
2.5 How to Insert the SIM Card.................................................................................................................................. 10
2.6 How to Remove the Finishing Cover ................................................................................................................... 11
2.7 Installation of the Antenna.................................................................................................................................... 12
2.8 PABX/PSTN Interface .......................................................................................................................................... 15
2.9 Data Interface....................................................................................................................................................... 15
Appendix A ..................................................................................................................................................................... 17
Spareparts List ..................................................................................................................................................... 17
2
Installation
IRIDIUM
0225
1 Configuration of Single-Channel Unit
L1
35423E
10 - 32V DC
PABX
Phone
DTE
2
3
4
1
Antenna Unit
Max. cable loss 3dB
Iridium
L1 + L2 < 100 metres
L2
Box
Connection
5
1
Handset
Control
Handset
Transceiver
Unit
Control
6
GPS
3
Installation
IRIDIUM
2 Installation
2.1 Cable Overview
Cable 1 Scanbus
Cable: 9*0.22 mm
2
shielded shield connected to ground
Cable connector type: 9 pole sub-d male
Tr ansceiver Description Handset Colour
1NC1 2 data+ 2 white Twisted 3 data- 3 brown pairs 4AF+4greenTwisted 5 AF- 5 yellow pairs 6 GND 6 grey Twisted 7 +24V DC 7 pink pairs 8RX_AF+8 blue Twisted 9 R X_AF- 9 red pairs
shield GND shield
2 3 4 5 6 7 8 9
1
10
36088
Cable 2 Phone
Cable connector type: RJ 11
Transceiver Description Veritas
1NC1 2 phone1+ 2 3 phone1- 3 4NC4
Cable 3 Data
Cable: 9*0.22 mm
2
shielded shield connected to ground
Cable connector type: 9 pole sub-d male
0225
4
Installation
IRIDIUM
0225
Tr ansceiver Description Veritas
1 DCD 1 2 received data 2 3 transmitted data 3 4 data t erm inal ready 4 5serial GND5 6 data s et ready 6 7 request t o s end 7 8 clear to send 8 9RI9
shield GND shield
Cable 4 Power supply
Front view
Pin no. Descript i on Colour
1 10-32V DC red 20V DC black 3NC white 4GND green
4
3
1
2
36662A
Cable 5 Description of connections to T-connection H4196
The wire terminal blocks are connected in parallel.
36090
Loading...
+ 14 hidden pages