Sailor 6248 Installation Manual
INSTALLATION GUIDE
Handset for transceiver
SAILOR 6248 VHF
What’s in the box?
Screw M4x45
TORX 20
(5 pcs.)
Gasket
Transceiver
Screw M4x12
TORX 20
(5 pcs.)
U-Mounting
Bracket
Screw ø3.9x19
TORX 20
(5 pcs.)
Wheel Knob
(2 pcs.)
Flush Mount
Bracket (2 pcs.)
Square Nut
M4x7x2.2
(5 pcs.)
Cradle
Screw M4x12
TORX 20 (2 pcs.)
Screw ø3.9x19
TORX 20 (2 pcs.)
Fuse
6.3x3.2mm
(10AT)
Handset
Cap for LTW
BD/BU
Connector
(3 pcs.)
SAILOR 6090
Power Converter
Cap for LTW
RJ45
Connector
User Manual
Power
Cable
Screw M4x12
TORX 20 (4 pcs.)
Screw ø3.9x19
TORX 20 (4 pcs.)
Fuse
6.3x3.2mm
(10AT)
How to install the VHF flush mount
How to prevent water ingress
Connector for Handset or Hand Microphone - If not used, put the cap
from the ACC connector on the front connector to prevent water ingress.
Dimensions for the VHF
How to install the VHF on desktop and overhead
Very important information!
Do not remove the membrane.
If you remove the membrane the
radio will not be waterproof.
Tilting ±20°
How to install the handset
226mm
62mm
This Handset has a hook-on/off function,
which is activated by a small magnet embedded
in the cradle.
The cradle must be installed as illustrated in
order to ensure the hook-on/off functionality
of the Handset.
39655C
75mm
45mm
135mm
54mm
* 120mm
Space for handset access
min. 100mm
Space for cable and handset cable
Drilling plan on desktop and overhead
71mm
How to install the SAILOR 6090 Power Converter
4 x M4 or hole for
self-tapping ø3.9
53mm
23.5mm
9mm
200mm
247mm
Cutout template for flush mounting of the VHF
Flush mount template
Drilling plan
R2.5mm x 4
Remove material from shaded area only!
System Configuration - Example
89mm
227mm
IMPORTANT!
If this template was printed from an electronic
file or copied, scaling (1:1) may not be correct.
Consequently do not attempt to use a printed
or copied template without prior checking of
dimensions.
Scale 1:1
Power Converter
+Vin
-Vin
Screen/Ground
99-133232-A
SAILOR 6090
24V DC
24V DC
Ground
SAILOR 6201/03
Handset
12V DC
SAILOR 6248/6249
VHF
12V DC
Remove jumper
for remote on/off
from VHF
NC
Remote on/off
-Vout (Blue)
+Vout (Red)
RX/TX
Aerial
SAILOR 6201/03
ACC
Handset
For further information, please download the installation
manual part no. 98-135548 at http://esupport.thrane.com
98-132282-B
info@thrane.com • thrane.com
Loading...