Installation / Users Manual
For:
802.11 B/G WiFi Module
Model SG901-1024
Sagrad Inc.
Corporate Headquarters and Service
4325 Woodland Park Drive, Suite 101
West Melbourne, Fl 32904
PH# 321-956-5496
Toll Free 888-723-5521
Fax 321-214-0315
www.Sagrad.com
FCC NOTICE
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Sagrad DOC # 906-0002
Product Description
You have purchased an 802.11 B/G module. This module is designed to be used
with different types of processors (Blackfin, Samsung, etc) and in different types of
applications (medical, industrial, etc).
For information on how to integrate the SW and Hardware for this module into the final
product please contact Sagrad Inc.
Warning: This device must be used with the following approved antennas:
1. MFG: Antenove Part#: 3030A5887-01
2. MFG: Laird Technologies Part#: NanoBlade-IP04
3. MFG: Tetrafab Part #: TED20002249
Use of any other antenna may violate you local government requirements such as the FCC
or IC.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE:
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 centimeters between the radiator and your body.
Sagrad DOC # 906-0002
Loading...