Sagem SG-XEK1 XPS Expansion Kit User Manual

This manual contains very important information. Please keep the manual in a safe place where it will not be lost.
SG-XEK1
APPLICATION NUMBER
MACHINE SERIAL NUMBER
PRODUCT KEY
These instructions describe the accessories that are included with the product and the procedure for installing the printer driver.
CHECK THE CONTENTS OF THE PACKAGE
This package contains the items listed below. Make sure that no items are missing. If an item is missing, contact your dealer.
this manual
Software CD-ROM This contains the XPS printer driver and a manual in PDF format.
MANUAL IN PDF FORMAT
Explanations of the procedures for printing using the XPS printer driver can be found in the "SGXEK1_en_usr.pdf" manual in the [English] folder in the [Manual] folder of the "Software CD-ROM".
Warranty
While every effort has been made to make this document as accurate and helpful as possible, SAGEM Corporation makes no warranty of any kind with regard to its content. All information included herein is subject to change without notice. SAGEM is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual.
Trademark acknowledgments
•Microsoft®, Windows®, Windows Vista® and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and other countries.
• IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation.
• All other trademarks and copyrights are the property of their respective owners.
SOFTWARE LICENSE
The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all or any portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the SOFTWARE LICENSE.
1
INSTALLING THE SOFTWARE
X SYSTEM REQUIREMENTS
Before installing the software described in this manual, make sure that your computer satisfies the following requirements.
Operating system
Computer type IBM PC/AT compatible computer
Display 1024 x 768 dots resolution and 16-bit colour or higher is recommended.
Other hardware requirements
*1 Printing is not possible in MS-DOS mode. *2 Cannot be used in the Starter Edition. *3 If memory is shared with on-board VBA or other functions, at least 2 GB must be available after
subtracting the shared memory.
*1
Windows Vista Home Premium or higher is recommended.*
• CPU: Intel Core 2 Duo 2 GHz equivalent or higher
• Memory: 2 GB or higher (the value indicated in "System Properties")*
• Hard disk: At least 15 GB of free space
An environment that allows any of the above operating systems to fully operate.
2
3
INSTALLING THE PRINTER DRIVER
Administrator's rights are required to install the software.
To use the XPS printer driver on a model that is equipped standard with the SPLC-c printer driver, the printer expansion kit is required.
Insert the "Software CD-ROM"
1
into your computer's CD-ROM drive.
Click the [Start] button ( ), click
2
[Computer], and then double-click the [CD-ROM] icon ().
Double-click the [Setup] icon
3
().
If a message screen appears asking you for confirmation, click [Continue].
2
When the language selection
4
window appears, select the language to be installed and click the [Next] button.
The "SOFTWARE LICENSE"
5
window will appear. Make sure that you understand the contents of the license agreement, select [I accept the terms of the license agreement] and then click the [Next] button.
Click the [Standard installation]
6
button or the [Custom installation] button.
If you clicked the [Standard installation] button, go to step 8.
When [Custom installation] is selected, you can change any of the items below. When [Standard installation] is selected, the installation will take place as indicated below.
• Machine connection method: LPR Direct Print (Auto Search)
Set as default printer: Yes
• Printer driver name: Cannot be changed
If you selected [Custom
7
installation] in step 6, select the connection method.
If you selected standard
8
installation or LPR Direct Print (Auto Search), printers connected to the network will be found. Select the machine and click the [Next] button.
• If the machine is not found, make sure that the machine is powered on and that the machine is connected to the network, and then click the [Re-search] button.
• You can also click the [Specify condition] button and search for the machine by entering the machine's name (host name) or IP address.
• LPR Direct Print (Specify Address) To create a port by directly entering the machine's IP address, select [LPR Direct Print (Specify Address)] and click the [Next] button. Enter the IP address of the machine and click the [Next] button. (You will go to step 9.)
• To automatically find the machine connected to the network, select [LPR Direct Print (Auto Search)] and click the [Next] button.
• To use the USB or other port that was created when the printer driver was installed, select [Use an existing port] and click the [Next] button. Select the machine's port from the list and click the [Next] button. (You will go to step 9.)
When you are asked whether or
9
not you want the printer to be your default printer, make a selection and click the [Next] button.
If you clicked the [Custom installation] button in step 6, the following windows will appear.
Printer name window If you wish to change the printer name, enter the desired name and click the [Next] button.
3
Follow the on-screen
10
instructions.
Read the message in the window that appears and click the [Next] button. Installation begins.
If a security warning window appears, be sure to click [Install this driver software anyway].
When the installation completed
11
screen appears, click the [OK] button.
After the installation, a message prompting you to restart your computer may appear. If this message appears, save any files that are open and then click the [Yes] button to restart.
This completes the installation.
REMOVING THE SOFTWARE
To remove the printer driver or software installed using the installer, follow the steps below.
Click the [start] button ( ) and
1
then click [Control Panel].
Click [Uninstall a program].
2
Select "SAGEM XPS A Printer"
3
from the list and delete it.
For more information, see the manual for the operating system or Help.
Restart your computer.
4
Save any files that are open and then restart your computer.
4
SG-XEK1
PRINTED IN JAPAN
2009D
DSC1
CINSF4502FC51
Loading...