Sagem SG-DSK2 Data Security Kit User Manual
DATA SECURITY KIT
SG-DSK2
This manual contains very important
information. Please keep the manual in a safe
place where it will not be lost.
SG-DSK2
APPLICATION
NUMBER
MACHINE SERIAL
NUMBER
PRODUCT KEY
Warranty
While every effort has been made to make this document as accurate and helpful as possible,
SAGEM Communications makes no warranty of any kind with regard to its content. All
information included herein is subject to change without notice. SAGEM is not responsible for
any loss or damages, direct or indirect, arising from or related to the use of this operation
manual.
© Copyright
SAGEM Communications
2009. All rights reserved. Reproduction, adaptation or
translation without prior written permission is prohibited, except as allowed under copyright laws.
Note:
"System Settings (Administrator)" in this manual refers to the system settings that require
logging in with administrator rights, and "System Settings (General)" refers to the system
settings that can be configured by general users (including the administrator).
Icons used in the manuals
The icons in this manual indicate the following types of information:
This provides a supplemental explanation of a function or procedure.
This explains how to cancel or correct an operation.
The display screens, messages, and key names shown in the manual may differ from
those on the actual machine due to product improvements and modifications.
Contents
Introduction ........................................................................................................................... 2
When the data security kit is installed................................................................................... 4
● System settings of the data security kit ...........................................................................4
● Document control function ...............................................................................................4
● Document Filing ..............................................................................................................4
● Authority group registration screen..................................................................................5
● Protecting passwords ......................................................................................................6
● Restrictions on tandem copying and tandem printing......................................................7
● Security Settings in the Web pages.................................................................................8
● Transferring copied data ..................................................................................................8
System settings.....................................................................................................................9
● Using the System Settings (Administrator)...................................................................... 9
● System settings for security.............................................................................................9
● Data Clearance Settings................................................................................................11
● Enable/Disable Settings ................................................................................................16
● Jobs Completed List Display Setting .............................................................................17
● Job Status Display Setting.............................................................................................18
● Release Lock on File/Folder Operation .........................................................................18
● Product Key ................................................................................................................... 18
Document Control Setting ................................................................................................... 19
● Document control ..........................................................................................................19
● Modes to which the document control function can be added....................................... 20
● Enabling the document control function ........................................................................20
● Using the document control function .............................................................................24
1
Introduction
The SG-DSK2 adds a security function to the SAGEM Digital Full Color Multifunctional
System.
When the copy function, printer function, network scanner function, or fax function of a
Digital Full
generated for the job is encrypted, and when the job is finished, the encrypted data is immediately
erased from memory and the hard disk.
Color
Multifunctional System with the security function is used, the image data that is
■ Note:
To ensure that the data security function of the machine provides maximum security,
observe the following:
● The administrator plays an important role in maintaining security. Exercise appropriate
care in selecting the person that will assume the job of administrator.
● Be sure to change the administrator password immediately each time a new person
takes over as administrator.
● Change the administrator
● Do not select a password that can be easily guessed for the administrator
● The system settings (administrator) are very important for security management. If
you leave the machine when using the system settings (administrator), be sure to
touch the [Logout] key to quit the system settings (administrator). The administrator of
the machine should inform users that they are not to access the system settings
(administrator) without permission.
● The customer bears responsibility for control of copies of documents made on the
machine and faxes received on the machine.
● Even when the data security kit is installed, note that fax data in the polling memory
box used by the facsimile
password
function
can be read.
on a regular basis (at least once every 60 days).
SAGEM
password
.
■ Backing up and clearing data stored with the document filing
function
When the data security kit is installed, data previously stored in the machine with the
document filing function is cleared. For this reason, any data that you need to keep is
copied to a computer before the data security kit is installed, and then returned to the
machine after installation and clearing of the previous data. (This work is normally
performed by a service technician at the time of installation of the data security kit.)
Only confidential folders can be used to return data from a computer to the machine
after installation of the data security kit. Before returning data from a computer to the
machine, create confidential folders if needed. For the procedure for storing data on a
computer and returning data from a computer to the machine, see document filing help
in the Web pages of the machine.
2
■ About passwords for the Web page
If an incorrect "users" or "admin" password is entered 3 times in a row when attempting
to access the Web pages of a machine that has the data security kit installed, access to
pages that require entry of the "users" or "admin" password will be prohibited for 5
minutes.
Some of the procedures for operating the machine change when the data
security kit is installed. The manuals for the machine ( "OPERATION
MANUALS AND HOW TO USE THEM" in the Quick Start Guide) explain the
procedures for operating the machine when data security kit is not installed. This
manual explains the changes to those procedures when the data security kit is
installed.
☞
■ Export restrictions
The USB memory contains software to which export restrictions apply.
The license for the software is stated below. By using this software, you agree to
comply with the contents of this license.
● This software (and associated technical data) is subject to regulations based on
U.S. and Japanese laws related to export control, including the Foreign Exchange
and Foreign Trade Control Law and U.S. Export Administration Regulations. The
software and technical data may also be subject to export and import regulations of
other countries. The user agrees to strictly obey all applicable regulations and to
obtain related licenses prior to export, re-export, or import of the software. Export,
re-export, or downloading of this software to Cuba, Iran, North Korea, Sudan,
Syria, or other countries subject to export restriction by the U.S.A, or to the citizens
and residents of those countries, is prohibited. In addition, export or re-export of
this software to persons appearing in export prohibition lists published by the
governments of Japan, the U.S, and other countries is prohibited.
■ USB memory storage
This USB memory may be necessary for recovery in the event that the machine fails.
Store the USB memory in a safe location.
3
When the data security kit is
1
When the data security kit is installed, the following icon appears on the touch panel.
Touch the icon ( ) to view information on the data security kit version.
When the data security kit is installed, data remaining in the machine is automatically
erased after each job.
When data clearing begins, the following message appears for 6 seconds
* The duration of the message display can be changed with "Message Time Setting" in
the system settings (administrator).
(System Settings (Administrator) > "Operation Settings" > "Other Settings" >
"Message Time Setting")
installed
*
.
Data is being cleared.
If the machine power is turned off while image data is being cleared from the
hard disk drive or before a job is finished, the data may not be completely
erased. If you do not wish to leave partially cleared data when the power is
turned off, it is recommended that you use the program "Clear All Memory"
(page 11 of this manual), to complete data clearing before turning off the power.
System settings of the data security kit
When the data security kit is installed, settings to enhance security can be added to the system
settings (administrator) of the machine. See "
System settings
" (page 9 of this manual) for details.
Document control function
The document control function is used to embed a document control pattern on the paper
when print jobs, copies, and received faxes are printed.
The embedded document control pattern prevents secondary copying, faxing and other
operations of a printed document. For more information, see "Document Control Setting"
(page 19 of this manual).
Document Filing
To use the document filing function to store jobs in the machine when the data security kit is
installed, set the file property to "Confidential".
Files set to the "Sharing" or "Protect" properties cannot be stored. In addition, to print from a
computer using the retention function, enter a password in the printer driver settings (when
the factory default setting is in effect).
4
When the data security kit is installed
Authority group registration screen
When the data security kit is installed, the [Security] key is added to the "Authority Group
Registration" menu screen in the system settings (administrator). This screen is displayed
by selecting "User Control" > "Authority Group List".
When this key is touched, the following screen for configuring items appears.
System Settings
Security
Group Name : Guest
Print Jobs Other than Print Hold Job:
Document Filing Approval Setting :
Copy
Printer
Scan to HDD
Image Send
Quick File Mode
Allowed
Sharing Mode
Cancel
Confidential
OK
● Print Jobs Other than Print Hold Job
When [Allowed] is selected and the [OK] key is touched, print jobs other than hold jobs
are allowed in authority group registration when user authentication is enabled.
● Document Filing Approval Setting
When storing an authority group for user authentication, touch this key to select
whether or not document filing is allowed in each filing mode and for each job type.
To enable a filing mode, touch the checkbox of the mode to select it.
After selecting the desired checkboxes, touch the [OK] key.
Document filing must be allowed in the following settings.
By default, document filing is only allowed in confidential mode.
● Allow document filing in authority group registration (this setting)
● Disabling of Document Filing in the system settings (page 16 of this manual)
5
When the data security kit is installed
Protecting passwords
When the data security kit is installed, passwords entered from the operation panel of the
machine or the Web pages can be protected.
■ Administrator Password/User Password
When the data security kit is installed, password entry will be locked for 5 minutes if an incorrect administrator
password is entered 3 times in a row when the user authentication function is not enabled, or if an incorrect
user password is entered 3 times in a row when the user authentication function is enabled.
■
Confidential folders and confidential files of the document filing function
If an incorrect password is entered 3 times in a row for a specific confidential folder or
file, the folder or file will be locked. To unlock the folder or file, use "Release Lock on File/
Folder Operation" (page 18 of this manual).
● All files with the same user name and password can be printed at once using
the Batch Print feature of the document filing function ( Operation Guide
"BATCH PRINTING" in "6. DOCUMENT FILING".)
Files that have a password different from the password that was entered at the
time of the search will be treated as files for which an incorrect password was
entered. For this reason, it is recommended that you avoid executing searches
using [All Users] and [User Unknown] in so far as is possible.
● When the use of a file is prohibited, the following will apply when the document
filing function is used:
● When batch print is performed, a prohibited file will not be printed even if it
matches the search conditions.
☞
■ File search screen of document filing
When the data security kit is installed, the password entry setting will not appear in the
document filing search screen.
■ Encrypt PDF
When a job is printed by encrypted PDF direct printing (when the PS3 expansion kit is
installed), the job will appear in the spool queue of the job status screen and a password
must be entered to begin printing.
If an incorrect password is entered 3 times in a row when the data security kit installed,
the message "Operation is disabled. Please see your administrator for your assistance."
will be displayed for 6 seconds and printing will be locked.
If you touch a file in the spool screen for which an incorrect password was entered 3
times, the following screen will appear.
●
The print of this job is disabled.
Delete the job?
No Yes
To unlock the print job, use "
Release Lock on File/Folder Operation
Touch the [Yes] button to delete the print job.
● Touch the [No] button to cancel deletion of
the job.
" (page 18 of this manual).
6
When the data security kit is installed
■ FTP Pull Print
When the FTP Pull Print function is used to directly print a file on an FTP server, a "User
Name" and "Password" must be entered when the FTP server is selected. When the
data security kit is installed, entry will be locked for 5 minutes if an incorrect "User Name"
or "Password" is entered 3 times in a row.
■ Login when user authentication is enabled
When "User Authentication Settings" in the system settings (administrator) ( "USER
AUTHENTICATION" in the Quick Start Guide) is enabled, login is required in the login
screen before the machine can be used. When "A Warning when Login Fails" is enabled
in the system settings (administrator), the machine will lock for 5 minutes if login fails 3
times in a row.
The "A Warning when Login Fails" setting is always enabled when the data security kit
installed.
☞
Restrictions on tandem copying and tandem printing
Tandem copying and tandem printing operate as shown below based on the configuration of
the master machine and slave machine (whether or not the data security kit is installed).
■ Tandem copying
Data
security
kit: Yes
Data
security
Master machine
kit: No
■ Tandem printing
Data
security
kit: Yes
Data
security
Master machine
kit: No
Slave machine
Data security kit: Yes Data security kit: No
The tandem function can be
used. Data is cleared from
both the master and slave
machines.
The tandem function can be
used. Data is cleared from the
slave machine.
Slave machine
Data security kit: Yes Data security kit: No
The tandem function can be
used. Data is cleared from
both the master and slave
machines.
The tandem function can be
used. Data is cleared from the
slave machine.
The tandem function cannot
be used.
The regular tandem function
can be used.
The tandem function can be
used. Data is cleared from the
master machine.
The regular tandem function
can be used.
7
When the data security kit is installed
Security Settings in the Web pages
When the machine is used as a network printer and the FTP Pull Print function is used, the
data security kit enables authentication of the user by means of a "User Name" and
"Password" for the FTP server. (The Pull Print function allows a file on a previously stored
FTP server to be printed directly from the operation panel of the machine without using the
printer driver; see Operation Guide "DIRECTLY PRINTING A FILE ON AN FTP SERVER" in
"3. PRINTER".)
User authentication is enabled by selecting the [Enable User Authentication] checkbox on
the machine's Web page for configuring FTP Pull Print settings. This checkbox appears
when the data security kit is installed, and is initially selected (a checkmark appears).
System requirements and the procedure for accessing the Web pages are explained in
"ACCESSING THE WEB SERVER IN THE MACHINE" in the Quick Start Guide.
■
Procedure for directly printing a file on an FTP server (when user
authentication is enabled)
Your user name and password must be entered following selection of the FTP server that
contains the file to be printed from the touch panel of the machine.
When the FTP server is selected in step 2 of "DIRECTLY PRINTING A FILE ON AN FTP
SERVER" in "3. PRINTER" in the Operation Guide, a screen will appear prompting you
to enter your user name and password for the FTP server.
FTP Server Authentication
Enter the user name and password for FTP server.
User Name
Password
Cancel
OK
Touch the [User Name] key to enter your user name and the [Password] key to enter your
password. A letter entry screen will appear in each case.
When you have finished entering your user name/password, touch the [OK] key.
After entering your user name and password, continue from step 3 of "DIRECTLY
PRINTING A FILE ON AN FTP SERVER" in "3. PRINTER" in the Operation Guide.
Transferring copied data
When the data security kit is installed and the Web pages are used to copy data stored with
the document filing function to a computer, the copied data can only be transferred back to
the original machine from which it was copied.
The data cannot be transferred to another machine even if the machine conditions are the
same.
The [Restore from PC] key will only appear on the Web page and transfer of data back to
the machine will only be possible when a confidential folder is selected.
8
Loading...