Sage BTA820UK, BTA840UK User Manual

Sage by Heston Blumenthal
Customer Service Centre
Phone: 0844 334 5110
www.sageappliances.co.uk
customerservice@sageappliances.co.uk
Register your product and get more from your purchase
Product registration takes only a few minutes and ensures both a record of your purchase and your warranty. Registration also makes it easier to get support and advice on any questions or issues that you might have in the future. If you wish, we can also send you free recipes and additional hints and tips on making the best of your appliance.
Go to www.sageappliances.co.uk and click on ‘Product Registration’.
What’s on your mind?
Our constant aim is to improve the quality and features of our appliances. We welcome your comments and ideas in assisting our ongoing development.
Go to www.sageappliances.co.uk and click on ‘Support’.
Registered in England & Wales No. 8223512. Due to continued product improvement, the products illustrated or
photographed in this document may vary slightly from the actual product.
Copyright BRG Appliances 2013.
BTA820UK/BTA840UK Issue - B13
the Smart Toast
Instruction Booklet
BTA820UK/BTA840UK
PAge heAder.....CONTENTS
3 We recommend safety first
8 Getting to know your
new appliance
9 Operating your new appliance
14 Care, cleaning & storage of your
new appliance
2
PAge heAder.....WE RECOMMEND SAFETY FIRST
At Sage™ by Heston Blumenthal‰ we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
Before using for the first
time please ensure that your electricity supply is the same as shown on the rating label on the underside of the appliance. If you have any concerns please contact your local electricity company.
Your Sage™ by Heston
Blumenthal
appliance includes a BS 13 amp moulded mains plug on the supply cord.
Should you need to change
this plug, please complete the rewiring as follows (after safe disposal of the moulded plug).
Please note that a cut off plug
inserted into a socket is a serious danger risk
Wires are coloured as follows:
Blue = Neutral
Brown = Live
Green & Yellow = Earth
As the colours of the wire
may not correspond with the coloured markings which identify the terminals in your plug, please refer to the following:
The Blue wire must be
connected to the terminal which is marked ‘N’.
The Brown wire must be
connected to the terminal which is marked with the letter ‘L’.
The Green & Yellow wire
must be connected to the terminal which is marked with the letter E or the earth symbol
.
Please note that if a 13 amp
plug is used, a 13 amp fuse should be used.
3
PAge heAder.....WE RECOMMEND SAFETY FIRST
Carefully read all instructions
before operating and save for future reference.
Remove and safely discard
any packaging material or promotional labels before using the toaster for the first time.
To eliminate a choking
hazard for young children, remove and safely discard the protective cover fitted to the power plug of this appliance
Do not place the toaster near
the edge of a table, counter or bench top during operation. Ensure the surface is level, clean and free of water.
Do not place the toaster on
or near a hot gas or electric burner, or where it could touch a heated oven.
Keep appliance clear of walls
and other heat sensitive materials such as cloths and curtains.
Do not use the toaster on
sink drainboard.
Always ensure the toaster is
properly assembled before use. Follow the instructions provided in this book.
The appliance is not intended
to be operated by means of an external timer or separate remote control system.
Bread may burn, therefore
this toaster must not be used near or below curtains or other combustible material and it must be supervised at all times when in use.
Ensure that bread to be
toasted is the correct size for the toaster and does not protrude above the bread slice opening. Ensure the bread is not too thick or too long that it will jam or wedge the bread carriage.
Never cover the toaster whilst
it is plugged into the power outlet or while hot.
Do not place toast directly on
top of toasting slots to warm toast as this may prevent correct air circulation and damage the appliance.
Do not move the toaster
whilst in operation or when hot.
Do not touch hot surfaces.
Use side areas for lifting and carrying the appliance.
4
WE RECOMMEND SAFETY FIRST
Do not leave the toaster
unattended when toasting.
Always turn the power
off at the power outlet and then remove the plug from the power outlet before attempting to move the appliance, when the appliance is not in use and before cleaning or storing.
Do not allow breadcrumbs to
accumulate in the bottom of the toaster. Failure to clean the crumb tray regularly may result in a fire hazard.
Do not clean with metal
scouring pads. Pieces can break off the pad and touch electrical parts creating an electric shock hazard.
Keep the appliance clean.
Follow the cleaning instructions provided in this book.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
The temperature of accessible
surfaces may be high when the appliance is operating. The door or the outer surface may get hot when the appliance is operating.
Fully unwind the power cord
before use.
Do not let the power cord
hang over the edge of a table or counter, touch hot surfaces, or become knotted.
To protect against electric
shock, do not immerse power cord, power plug or appliance in water or any other liquid.
Children should be
supervised to ensure that they do not play with the appliance.
5
WE RECOMMEND SAFETY FIRST
This appliance is intended for
household use only. Do not use this appliance for other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.
Do not use the appliance if
power cord, power plug or appliance becomes damaged in any way. If damaged or maintenance other than cleaning is required, please contact Sage™ by Heston
Blumenthal
Customer Service on 0844 334 5110 or go to sageappliances.co.uk
Always disconnect the
appliance from the supply if it is left unattended and before assembling, disassembling and cleaning.
Children and user
maintenance shall not be made by children unless they are age 8 years and above and supervised. Keep the appliance and its cord out of the reach of children aged less than 8 years.
Regularly inspect the
supply cord, plug and appliance for any damage. If found damaged in any way or maintenance other than cleaning is required, immediately cease use of the appliance and contact Sage Customer Service on 0844 334 5110
The installation of a residual
current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.
6
WE RECOMMEND SAFETY FIRST
NOTE
This toaster is electronically controlled and will not operate until the toaster is plugged into a 230V power point and switched on.
This appliance can be used
by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Misuse may cause injury.
Always disconnect the
appliance from the supply if it is left unattended and before assembling, disassembling and cleaning.
WARNING
Never operate toaster on its side. Never add any food substance to the bread, muffins or crumpets as this can lead to electrocution or fire.
This toaster is for toasting bread, crumpets and muffins only. Placing other items in the toaster can lead to electrocution or fire.
The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council office.
SAVE THESE INSTRUCTIONS
7
GETTING TO KNOW YOUR NEW APPLIANCE - 2 SLICE (BTA820UK)
CJBA D
E F
G H
I
GETTING TO KNOW YOUR NEW APPLIANCE - 4 SLICE (BTA840UK)
CJD E A FB
A. TOAST/CANCEL button
With motorised lowering and raising, and toast ready sound alert.
B. A BIT MORE C. CRUMPET button D. DEFROST button
8
button
G H
I
E. QUICK LOOK
button
With motorised raising and lowering.
F. Extra wide self centring slots G. LED toasting progress indicator H. Variable browning control I. Cord storage J. Slide out crumb tray
OPERATING YOUR NEW APPLIANCE
Before first use, remove any packaging material or promotional labels attached to your toaster.
1. Insert the power plug into a 230V
power outlet then turn the power on. The TOAST/CANCEL button surround will illuminate in white. The LED toasting progress indicator will illuminate in red from left to right, then align to the selected browning setting (indicated by the position of the browning control slide). The toaster will revert to stand-by mode after 30 seconds if a button is not pressed or the browning control slide is not adjusted.
NOTE
When using the toaster for the first time, we suggest toasting on the maximum setting without bread. The toaster may emit a thin smoke or distinct odor on initial use. This is normal and not detrimental to the performance of the toaster.
2. Place 1 slice of bread, 1 crumpet
or half a muffin only, into each of the toasting slots. Ensure items for toasting are not too large or too thick to fit in the toasting slots.
The BTA820UK has a single browning control slide and a row of function buttons that simultaneously control the two toasting slots.
The BTA840UK has dual independent controls allowing each pair of slots to work independently so you can simultaneously toast to different preferences.
3. Select the desired browning setting
by adjusting the browning control slide on the front of the toaster. The browning settings range from '1' (lightest) to '5' (darkest). The LED toasting progress indicator will illuminate in red and align to the selected browning setting (as indicated by the position of the browning control slide).
NOTE
When using the toaster for the first time, it is suggested to toast on browning setting '3'. Various types of bread and personal preference may require a different browning setting. For example, raisin toast and white light-textured breads may require a lighter setting, whilst heavier textured breads may require a darker setting.
4. To start the toasting process, press
the TOAST/CANCEL button on top of the toaster. The TOAST/ CANCEL button surround will illuminate in red and the carriage will automatically lower into the toasting position and starts the toasting cycle. As the carriage automatically locks into position, the QUICK LOOK™ button surround will illuminate in white and the LED toasting progress indicator (above the selected browning setting) will flash and start to gradually count down (towards the left) indicating the toasting progress.
9
OPERATING YOUR NEW APPLIANCE
5. The QUICK LOOK™ button can
be pressed up until 10 seconds before the end of the toasting cycle to view the browning of the bread. When selected, the QUICK LOOK™ button surround will flash and the LED toasting progress indicator will remain steady (indicating that the selected browning setting has not been interrupted by the carriage rising). The toasting recommences immediately as the carriage lowers and locks into position, and as indicated by the QUICK LOOK™ button surround illuminating and the LED toasting progress indicator flashing.
6. Approximately 10 seconds before
the end of the selected browning setting, the QUICK LOOK™ button will cease illumination. As the toasting stops and the carriage rises, the TOAST/CANCEL button surround will flash and the LED toasting progress indicator will cease flashing. The LED toasting progress indicator will re-illuminate to the previously selected browning setting.
7. Once the toasting cycle has
completed and the carriage has risen and locked into the raised position, the toast ready alert will sound. Remove the toast. The TOAST/ CANCEL button surround will re-illuminate in white for up to 30 seconds, ready for the next toasting cycle.
NOTE
The toaster will revert to stand-by mode after 30 seconds if a BUTTON IS NOT pressed or the slide is not adjusted. All button surrounds and LED toasting progress indicator will cease illumination.
NOTE
The toaster will re-activate from stand-by mode and the TOAST/CANCEL button surround and LED toasting progress indicator will illuminate when:
Any of these buttons are pressed (except the TOAST/CANCEL button which will start the toasting process).
The browning control slide is moved.
The power at the power outlet is turned off then on again.
WARNING
Do not leave the toaster unattended when in use as toast may jam. In the unlikely event that bread, crumpets or muffins become jammed in the toasting slots, all the button buttons and the LED toasting progress indicator will flash and the elements will turn off. Switch the toaster off at the power outlet, remove the power plug and allow the toaster to cool completely before carefully easing the bread out of slots. Take care not to damage the elements.
10
OPERATING YOUR NEW APPLIANCE
TOAST/CANCEL BUTTON
The TOAST/CANCEL button surround will illuminate in white for up to 30 seconds when the appliance is turned on. The toaster will revert to stand-by mode after 30 seconds if a button is not pressed or the browning control slide is not adjusted.
Press the TOAST/CANCEL button
once to lower the carriage and start the toasting process. The TOAST/CANCEL button surround will then illuminate in red.
Press the TOAST/CANCEL button
during operation to cancel the toasting process or any other functions. The TOAST/CANCEL button illumination will change from red to white and stay illuminated for up to 30 seconds.
NOTE
Toasting can be stopped at any time by pressing the TOAST/CANCEL button located on the top of the toaster. This will cancel the operation and the carriage will move to the raised position.
NOTE
button
The toaster features a QUICK LOOK button. This automatically raises the carriage without cancelling or resetting the selected browning setting. Use the QUICK LOOK to view browning progress during the toasting and, if necessary, cancel the process when the desired toast colour is achieved.
A BIT MORE™ SETTING
This feature can be selected after or during the toasting cycle.
To use this feature during the toasting cycle:
The A BIT MORE™ button surround will illuminate in white when selected. The toasting time will automatically increase but will not illuminate more of the LED toasting progress indicator. A BIT MORE™ function can be cancelled by pressing the A BIT MORE™ button again and the original toasting cycle will continue.
To use this feature after the toasting cycle has completed:
1. The A BIT MORE™ button surround
will illuminate in white when selected. The carriage will automatically lower and begin the additional toasting time. The LED toasting progress indicator will automatically align with the lowest browning setting then flash and count down for the additional browning time.
2. The TOAST/CANCEL button
surround will also illuminate in red and the QUICK LOOK™ button surround will illuminate in white allowing you to check on the toasting progress and, if necessary, cancel the cycle by pressing the TOAST/CANCEL button when the desired toast colour is achieved.
3. Approximately 10 seconds before
the end of the additional browning, the QUICK LOOK™ button will cease illumination. As the toasting stops and the carriage rises, the TOAST/CANCEL button surround will flash, the LED toasting progress indicator will cease flashing and the A BIT MORE™ button surround will cease illumination. The LED toasting progress indicator will re-illuminate to the previously selected browning setting.
11
PAge heAder.....
OPERATING YOUR NEW APPLIANCE
4. Once the toasting cycle has finished
and the carriage has risen and locked into the raised position, the toast ready alert will sound. Remove the toast. The TOAST/CANCEL button surround will re-illuminate in white for up to 30 seconds, ready for the next toasting cycle.
NOTE
The A BIT MORE
button can be used with the TOAST, CRUMPET and DEFROST functions.
CRUMPET BUTTON
This feature activates additional heat to the middle heating elements to perfectly toast crumpet tops and lightly toast the crumpet bases.
To toast crumpets:
1. Place the crumpets into the toasting
slots with crumpet tops facing inwards as per the crumpet markings on the top cover plate above the middle elements of the toaster.
2. Select the desired browning setting
by adjusting the browning control slide on the front of the toaster. The browning settings range from '1' (lightest) to '5' (darkest).
3. Press the TOAST/CANCEL button
and the surround will illuminate in red then press the CRUMPET button and the surround will illuminate in white. The crumpets will automatically lower into the toasting slots. The middle and side heating elements will automatically adjust.
4. The QUICK LOOK™ button
surround will also illuminate in white allowing the toasting progress to be checked and, if necessary, cancel the cycle by pressing the TOAST/ CANCEL button when the desired toast colour is achieved.
5. Approximately 10 seconds before
the end of the selected browning setting, the QUICK LOOK™ button will cease illumination. As the toasting stops and the carriage rises, the TOAST/CANCEL button surround will flash and the LED toasting progress indicator will cease flashing. The LED toasting progress indicator will re-illuminate to the previously selected browning setting.
6. Once the toasting cycle has finished
and the carriage has risen and locked into the raised position, the toast ready alert will sound. Remove the crumpets. The TOAST/ CANCEL button surround will re-illuminate in white for up to 30 seconds, ready for the next toasting cycle. The CRUMPET button surround will remain illuminated and should be pressed once to cancel if a subsequent toasting function is required. The CRUMPET button surround will cease to illuminate after 30 seconds or when the appliance is switched off at the power point.
NOTE
Place the crumpets into the toasting slots with crumpet tops facing inwards as per the crumpet markings on the top cover plate above the middle elements of the toaster.
12
PAge heAder.....
OPERATING YOUR NEW APPLIANCE
DEFROST BUTTON
This feature activates additional toasting time required to toast frozen bread.
To toast frozen bread:
1. Place the bread into the toasting slots.
2. Select the desired browning setting
by adjusting the browning control slide on the front of the toaster. The browning settings range from '1' (lightest) to '5' (darkest).
3. Press the TOAST/CANCEL button
and the surround will illuminate in red then press the DEFROST button and the surround will illuminate in white. The bread will automatically lower into the toasting slots. The toasting time will automatically increase.
4. The QUICK LOOK™ button
surround will illuminate in white allowing you to check on the toasting progress and, if necessary, cancel the cycle by pressing TOAST/CANCEL button when the desired toast colour is achieved. Approximately 10 seconds before the end of the selected browning setting, the QUICK LOOK™ button will cease illumination.
5. As the toasting stops and the
carriage rises, the TOAST/CANCEL button surround will flash and the LED toasting progress indicator will cease flashing. The LED toasting progress indicator will re-illuminate to the previously selected browning setting.
6. Once the toasting cycle has finished
and the carriage has risen and locked into the raised position, the toast ready alert will sound. Remove the toast. The TOAST/CANCEL button surround will re-illuminate in white for up to 30 seconds, ready for the next toasting cycle. The DEFROST button surround will remain illuminated and should be pressed once to cancel if a subsequent toasting function is required. The DEFROST button surround will cease to illuminate after 30 seconds or when the appliance is switched off at the power point. The DEFROST button works for frozen crumpets as well.
QUICK LOOK™ BUTTON
This feature automatically raises and lowers the carriage so you can check progress without interrupting and/or cancelling the toasting cycle.
To select this feature:
1. 1. The QUICK LOOK™ button
surround will illuminate in white during the toasting cycle and when using the A BIT MORE™ feature. You can press the QUICK LOOK™ button during toasting cycle to view the toasting progress. If selected, the QUICK LOOK™ button surround will flash. The LED toasting progress indicator will cease to flash indicating that the selected toasting cycle time has not been interrupted. When the QUICK LOOK™ cycle has finished, the toasting cycle will re-commence, indicated by the resumed flashing of LED toasting progress indicator.
2. Approximately 10 seconds before
the end of the selected browning setting, the QUICK LOOK™ button will cease illumination and cannot be activated in this time.
13
PAge heAder.....
CARE, CLEANING & STORAGE
CARE AND CLEANING
1. Switch the toaster off at the power
outlet and then remove the power plug from the power outlet. Allow the toaster to cool completely before cleaning.
2. To clean any crumbs from the
toaster, remove the crumb tray (located under the control panel at the front of the toaster) by pulling it outwards. Empty and replace the crumb tray before using the toaster again. Replace the crumb tray by sliding it inwards until it locks into position.
3. To remove any additional crumbs,
turn the toaster upside down over a bin and shake crumbs free.
4. Wipe the outside of the toaster with
a slightly dampened soft cloth and then dry it with a soft dry cloth to dry completely.
NOTE
Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts creating an electric shock hazard.
STORAGE
Switch toaster off at the power outlet and remove the power plug from the power outlet. Allow the toaster to cool completely before storing. Follow the directions for cleaning and store in an upright position on a flat surface on a bench top or in an accessible cupboard.
Do not store anything on top of the toaster.
WARNING
Do not use the toaster without the crumb tray in position. Do not allow crumbs to build up in the crumb tray. Failure to clean the crumb tray regularly may result in a fire hazard.
14
NOTES
15
Loading...