SAFT VHT 75CS 1Z 5_CS

VHT 7/5 Cs
High Temperature Series
Saft’s VHT high temperature Ni-MH series are perfectly suited for professional applications requiring a battery with an exceptional robustness. It is designed to operate in very demanding environment (from - 40°C to + 85°C).
The VHT 7/5 Cs can be fast charged with a maximum current of C/3, and offers an exceptional life duration. The VHT 7/5 Cs delivers a huge number of full or partial cycles: 2000 full cycles and even 5000 cycles with 50% DOD (Depth Of Discharge).
To meet customers’ requirements, Saft provides custom-designed and standardized battery packs.
For your battery design and system needs, please contact Saft’s engineers.
Applications
Photovoltaic systems
Renewable energy storage
Tracking
Underwater applications
Robotics
Professional electronics
Main advantages
Very large temperature range (- 40°C to + 85°C)
Excellent charge and discharge efficiency at very low and very high temperature
Fast charge (3h)
Very high cycle life
Superior robustness
Technology
Foam positive electrode
Plastic bonded metal-hydride negative electrode
Electrical characteristics
Nominal voltage (V) Typical capacity (mAh)* IEC minimum capacity (mAh)* IEC designation Impedance at 1000 Hz (mΩ)
* Charge 16 h at C/10, discharge at C/5.
Dimensions
Diameter (mm) Height (mm) Top projection (mm) Top flat area diameter (mm) Weight (g)
Dimensions are given for bare cells.
Charge conditions Rate
Fast*
* Charge termination required.
Maximum discharge current
Continuous (A) at + 20°C Peak (A) at + 20°C*
* Peak duration: 0.3 second - final discharge voltage 0.65 volt/cell. Below 0°C, a cut-off voltage in charge is required (Consult Saft)
Time (h)
3
Temp. (°C)
1.2 4200 4000
HRMT 23/62
20
22.0 ± 0.05
60.0 ± 0.3
0.8 ± 0.2
9.0 min 74
Charge current (mA)
1330
15
130
Temperature range in discharge
- 40°C to + 85°C (C/10 discharge current)
- 20°C to + 85°C (C/4 discharge current)
Storage
Recommended: + 5°C to + 25°C Relative humidity: 65 ± 5 %
Electrical performances at different temperature
No damage
Operational
Typical performances
For graphs shown, C is the IEC5 capacity.
Dimensions are in mm.
9.0
22.0
0.8
60.0
Autonomy > 75%
(for C/4 discharge current max)
-20 0 20 40 60 10080-40
Temperature (°C)
End of charge cut-off - charge at C/3
1.6
1.5
1.4
1.3
Voltage (V)
1.2
1.1
1.0
0 1 2 3 4
Time (h)
Discharge at C/10 at different temperature after charge at C/10 at different temperature
1.6
1.4
1.2
delta V/V = 0.1%
Data are given for single cells. Please consult Saft for utilization of cell outside this specification.
Data in this document are subject to change without notice and become contractual only after written confirmation by Saft.
Saft
Industrial Battery Group 12, rue Sadi Carnot 93170 Bagnolet - France Tel. : +33 1 49 93 19 18 Fax : +33 1 49 93 19 64 www.saftbatteries.com
Voltage (V)
1.0
0.8
0.6
Charge at C/3 - discharge at 2 A
4.5
4.0
3.5
3.0
2.5
2.0
Capacity (Ah)
1.5
1.0
0.5
0
- 30°C 0°C + 50°C+ 20°C + 70°C- 20°C - 10°C
2 4 6 8 10 120
200 400 600 800 1000 1200 1400 1600 1800 2000 22000
Autonomy (h)
Cycles
Doc No.: 11139-2-0612
Edition: June 2012
Data in this document is subject to change without notice and becomes contractual only after written confirmation.
Saft SAS. Stock capital 31.944.00
RCS Bobigny B 383 703 873
Produced in FR by Soyouzgraphic
Loading...