How it Works
Safety Track
Loading...
UCIT 2

Safety Track UCIT 2, UCIT BASIC, UCIT LIVE Desktop Viewer User Manual

Download
UCIT BASIC/LIVE DASH CAM
Vehicle Video Recorder
Desktop Viewer User Guide
2015 JUN V 1.1
1
Insertion:
To replace the micro SD Card, push the SD Card into the slot until you hear a “click”. Let go as you will hear a second “click” telling you that card is in position. Install the tamper proof locking bracket included with your camera.
C. Inserting into Computer:
1. Once you have recovered the SD Card, using the best combination of supplied
adapters, insert into your computer.
2. Once inserted, close the autoplay window that commonly pops up and open the
Desktop SD Card Player.
(We have found that it always works best if the SD Card is inserted into the computer before you run the application)
2
2
1
2
4
3
5
6
7
8
9
10
11
12
13
14
15
16
E. Playback
Play back is of course used to playback the video recorded on to the SD Card.
Once you select Playback, Icon number 3 in section D, you will enter the playback window.
Step 1: Select “Removable Storage” and choose the proper drive your SD Card is in. Once the drive is selected video data will populate in red as shown.
Step 2: Double click to start playback.
You can also choose to playback video that you have backed up to your computer as well. This is done by selecting “Backup File”, clicking Browse and locating the file folder that the videos were placed when backing up.
Recordings are labeled with an ID #, Time and Date Start (Record Time), Event Type, Time and Date End (Time End) and Total Times (Duration of Recording)
4
Depending on the configuration of your SD Card. You may see up to 3 different types of events. Two of them will not be overwritten (Push Button and G-Sensor).
1. Record Start - This is general continuous recorded video. This is captured
when the Camera System receives power. This video can be overwritten.
2. Push Button By Not Overwrite - This is video that is highlighted when the
force record button is physically pressed on the camera system. In most situations this button is pressed in emergencies. This video will not be overwritten.
3. G-Sensor By Not Overwrite - This is video that is highlighted when a G-
Sensor event is triggered. Such as an accident, hard braking, harsh acceleration or a hard turn.
4
F. Backup
Here you can save recorded files to your PC. This is done by clicking on Backup, number 5 in section D. The Backup window will appear like the one below.
Step 1: Assuming you want to backup a video(s) from your Micro SD Card to your PC, you will just need to select the drive your Micro SD is in under
“Removable Storage”.
Step 2: To the left of the ID # you will see a white box. Check the video(s) you want to backup by clicking in the box.
Step 3: After you have selected your video(s) you will now want to select the format to the right.
(1) RAW Backup File (*sd) (Recommended) (2) AVI Backup File (*avi"
6
NOTE: If you backup by original format of Micro SD Card (*sd), the file recorded with location of GPS, speed and G-Sensor. (Carbox Player is used to playback these type of backups.) If backup by the format of (*.avi), the file recorded date, video and audio.
Step 4: Backup Path: Select your backup destination (e.g.: C:\blackbox)
Step 5: Select “Backup” and your video(s) will start to save. Time to backup depends on the size of the file.
G. Configuration
With your SD Card inserted, select the Configuration icon. (#7) The configuration window will appear and below will describe configuration settings:
First you will want to select the drive that your Micro SD Card is in at the top left of the window. This will unlock the fields to configure the Micro SD Card."
7
1
2
3
456
8
7
9
10
6
12
11
1- Video Quality: Adjust the video quality to High, Normal or Low. High is of course recommended for the best video quality. You can adjust to Normal or Low to have more space on your Micro SD Card. The Higher the quality of video the more storage space it uses.
2- Video Frame Rate: This gives you a drop down menu to adjust the frame rate. It is set to highest as a standard at 30 NTSC FPS so that the video is smooth. Again, this can be adjusted to get the most storage out of your Micro SD Card and sacrifice some frames.
3- Car Information: Easily identify vehicle information. Vehicle license plate number, model, VIN etc can be input here to identify this information quickly.
4- Password: This is a feature of the Micro SD Card encryption, to prevent others from accessing any data. Set a password, then that password is required to access the playback files, settings or to format the Micro SD Card.
5- Time Zone: Set time zone here. GPS has an auto time correction.
6- Copy Me To SD Card: It saves configuration settings to be used at a later time.
7- Unit of Speed: Adjust the unit of speed to your preference. Mile per hour, Kilometer per hour, Knot per hour.
8- Playback Password: This is an on screen playback password. When enabled you need to enter password first before entering playback mode. Change settings first then set the password. Set password from 0-9.
9- G-Sensor Sensitivity: Here you set the sensitivity for the G-Sensor. OFF, Light, Low, Normal, High, Heavy. (Light meaning less sensitive and heavy being more sensitive.) Example: Set to light if you live in a place like Michigan, otherwise you will have repeated emergency recording that won’t be overwritten. This is because of the potholes and uneven roads.
10- Sensor Sensitivity: This has to do with the IR’s (camera lights) and the sensitivity of them to come on at night."
8
9
10
If there are any questions about this user guide please contact your sales rep
or our support team. Thank you very much.
Safety Track - 249 Main St. Belleville MI 48198 - 734-699-7633
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use