POLYCARBONATE PROTECTION
STI WIDEBODY
KEYPAD PROTECTOR
STI-6560
PRODUCT OVERVIEW
Here is a super tough protective cover to increase the life and reliability of larger
digital keypads, access controls, alarms, volume or lighting controls and similar
devices by protecting them from accidental or intentional damage, as well as severe
environments, dirt and grime when optional gaskets are installed. Three models are
offered: with a key lock, thumb lock or without lock. Each comes in either clear or
smoked. Installation is simple with anchors and screws provided.
BACKED BY A THREE YEAR GUARANTEE
As all STI protective covers, Widebody is backed by a three year guarantee against
breakage in normal use. It is molded of thick, super tough polycarbonate material.
KEY FEATURES
General Information
· Protection against physical damage,
grime and harsh environments
inside and out.
· Three year guarantee against
breakage of polycarbonate in
normal use.
Construction
· Molded of thick, super tough
polycarbonate material.
Installation
· Typical working properties of
polycarbonate are -40° to 250°F
(-40° to 121°C).
· Fast, easy installation.
Options
· Gasket available for use in areas
that require frequent hosing down
or have a wet environment.
· Available with or without key or
thumb lock.
· Available in clear or smoke color.
STI Widebody Keypad Protector
Dimensions and Technical Information
MODELS AVAILABLE
STI-6550 Widebody Keypad Protector without lock - clear
STI-6 560 Widebody Keypad Protector with key lock - clear
STI-65 61
STI-6550S Widebody Keypad Protector without key lock - smoke
STI-6 560S Widebody Keypad Protector with key lock - smoke
STI-6 552 Weather Gasket, 3/16 in.
STI-6580 Heater Kit - 12 Volt
STI-6582 Backplate
STI-6583 Heater Kit - 24 Volt
KI T- 81 Tamper resistant stainless steel screws, #8 x 2 in.
KI T-1903 8 Tamper bit for KIT-81
KIT-H18054 Additional keys (2) #CH751
NOTE: Locking units are not permitted on actuation stations used
Widebody Keypad Protector with thumb lock - clear
snake eye (quantity 4)
for fire or emergency life safety functions.
APPROVALS & WARRANTY
TESTING
It has been tested and approved or listed by:
· Underwriter Laboratories No. S7255
· Canadian Underwriter Laboratories No. S7255
WARRANTY
Three year guarantee against breakage of polycarbonate in
normal use.
Accessories
These tough protective covers become even more useful with
these accessories: STI Heater Kit to protect your keypads, etc.
in cold climates (assuring their continued operation), a weather
gasket, a backplate and additional keys for locking models.
SIDE VIEW
1.75 in. (44mm)
6.12 in.
(155mm)
4.25 in.
(108mm)
9.87 in.
(250mm)
8.25 in.
(209mm)
HINGES
FRONT VIEW
Printed in U.S.A., © 1987-2020 Safety Technology International, Inc.
11/ 17Subject to change without notice.