Safety Technology International STI Stopper Dome Heated Enclosure Data Sheet

FIRE PRODUCTS

STI STOPPER

DOME

HEATED ENCLOSURE

STI-1229HTR

HAZARD

Typ e 4X

FILE E228169

PATENT PENDING

ADA

Compliant

STI-1229HTR-HA Z

STI-1229HTR 240HAZ

PRODUCT OVERVIEW

Now there is a way to protect your signaling device located where temperature or environmental conditions exceed the suggested operation range. This protective cover with heater assembly for strobe appliances, is UL Listed to U.S. and Canadian Safety Standards. Thermostatically controlled heaters and a continuous duty fan maintain a uniform temperature in the cover when located in a cold environment. Applications include, but are not limited to, refrigerators, freezers, meat packaging plants, arctic environments, ocean rigs, slaughterhouses, etc. UL/cUL Listed down to -70°F (-57°C) applicable both indoors and outdoors.

Typ e 4X

FILE S 7025

PATENT PENDING

ADA

Compliant

STI-1229HTR

STI-1229HTR 240

KEY FEATURES

General Information

· For use in areas where temperature or environmental conditions exceed the operational range of ﬁre UL Listed strobe signaling devices.

· Maintains operating strobe appliance temperature with external temperatures to -70°F (-57°C).

esign

DA C

ompliance for

DA C

ompliant strobes to

· Enables A visual ﬁre protection systems where freezing temperatures or other harsh conditions exceed the operating limits of strobe signal devices.

· CSFM requires local approval only.

· Heater unit cycles as required to maintain the correct range of operating temperatures.

· Prevents buildup of snow on the unit or entry of moisture in wash down areas to assure that strobes remain clearly visible.

· Fan runs continuously to maintain a uniform temperature inside the enclosure.

· Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).

· Dust tight (Class II Group F and G Di v. 2) .

· All Class III locations.

Construction

· Enclosure rated to Type 4X Standards. Heater assembly rated down to -70°F (-57°C).

· UL/cUL ambient rating -70°F to 120°F (-57°C to 49°C) indoors or outdoors.

· Units UL Listed to U.S. and Canadian safety standards for speciﬁc strobes only (see chart on reverse).

Installation

· Protects A UL 1971 Standards.

· The thick, clear polycarbonate cover is UV-stabilized.

· Typical working proper ties of polycarbonate are -40° to 250°F (-40° to 121°C).

STI Stopper® Dome Heated Enclosure

Dimensions and Technical Information

MODELS AVAILABLE

ST I -12 29 Stopper Dome for strobe only with

ST I -12 29 - H A Z Stopper Dome for strobe only with

STI-1229HTR Stopper Dome heated enclosure for

STI-1229HTR-HAZ Stopper Dome heated enclosure for

STI-1229HTR240 Stopper Dome heated enclosure for

STI-1229HTR240-HA Z Stopper Dome heated enclosure for

KIT-H18021 Type 4X 3/4” rigid conduit hub (included

ST I -12 84 Single Gang Mounting Adapter

ELECTRICAL ENTRY

IN AREAS WHERE FREQUENT

ASH DOWNS OCCUR

WASHERS MAY BE USED TO

STAND OFF ENCLOSED SPACER

(NOT PROVIDED)

1/4 in. (6.3mm)

DIA. HOLE

ANCHOR

(4) PROVIDED

SCREW #10 x 1 1/2 in.

(4) PROVIDED

LOW VOLTAGE TERMINAL BLOCK

3/4 in. NPT. NIPPLE

(NOT PROVIDED)

enclosed back box, Type 4X

enclosed back box, Type 4X hazardous locations

strobe only, Type 4X

strobe only, Type 4X hazardous locations

strobe only, Type 4X

strobe only, Type 4X hazardous locations

with hazardous model)

LOW VOLTAGE

HIGH VOLTAGE

ELECTRICAL ENTRY

SEALING HUB (NOT PROVIDED)

3/4 in.(25mm) NPT NIPPLE (NOT PROVIDED)

3/4 in. NPT HUB (2) PROVIDED

ENCLOSED BACK BOX

LOW TEMP

WARNING

THERMOSTAT

WARNING LABEL

SEALING HUB (NOT PROVIDED)

APPLIANCE

WIRE

HEATER ASSEMBLY

FAN

HIGH VOLTAGE TERMINAL BLOCK

APPROVALS & WARRANTY

TESTING

It has been tested and approved or listed by:

· UL and cUL, Type 4X, and UL 50 File S7025

· UL and cUL Hazardous File E228169

· For hazardous applications in Canada, to meet cUL, your strobe must be ULC Listed.UL and cUL, Type 4X, and UL 50 File S7025

WARRANTY

Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).

PERFORMANCE REVIEW FOR STI-1229HTR & STI-1229HTR240

Manufacturer

WHEELOCK (RSS 24MCW)

ADT SECURITY (ADTG1-V Series ), EST/Edwards ( G1-V Series, G1-HV Series, G1-HOV Series, EG1-V Series, EG1-HV Series, EG1-HOV Series), Honeywell (XLSG1-V Series, XLS1-HV Series), Mircom ( MG1-V Series, MG1-HV Series, MG1-HOV Series) , Mirtone (MG1-V Series), Siemens (G1-V Series)

FARADAY LLC (2700) EST/ EDWARDS ( 2440 S, 202 Series), HONEYWELL ( XL S202 Series),

MIRCOM (MS Series), SIEMENS (202 Series), ZI TON PTY LTD ( ZG1-V-SERIES )

AMSECO (SL24W-153075), AMSECO COLORED LENSES (SLW24-153075 A, B, G OR R, SL24C-3075110 A, B, G OR R, CSL24W- A, B, G OR R, CSL24C

- A, B, G OR R ), HONE YWELL (X LSG1-HOV SERIES), MIRCOM (FS-240 ),

POTTER ELECTRIC (AS-24-153075R, AS-24-153075W)

PERFORMANCE REVIEW FOR STI-1229HTR-HAZ & STI-1229HTR240-HAZ

FARADAY LLC (2700)

SYSTEM S EN SO R ( SS24110ADA )

AMSECO ( SL24W-153075 ), GENTEX ( GES24-15/75 W, R OR P)

FUSE

CONTROL THERMOSTAT

SCREW #8-32 x 3/8 in. (4) PROVIDED

STROBE APPLIANCE

GASKET (1) PROVIDED

SOLID CLEAR COVER

WASHER (6) PROVIDED

#8-32 x 5/8 in. SOCKET CAP SCREW (6) PROVIDED

Light Loss %

31%

32%

33% 34%

37%

33%

35%

36%

03 /19Subject to change without notice.