Safety Technology International STI-SA5600 Installation Instructions

OPTIONAL SURFACE MOUNT

BLUE = STROBE (+)

BLACK = GND -

YELLOW = SIREN (+)

WHITE = TAMPER

GREEN = TAMPER

VDC

12~24 @ 0.42A MAX

Control W/POWER SUPPLY

- Alarm on trigger close

KIT-71100A SHOWN

#6 x 1.25 in. SCREW

(4) PROVIDED WITH KIT-71100A

SIREN STROBE ELECTRONIC BASE

SEALING O-RING (2) PROVIDED

SCREW #6-32 x 1 in. (2) PROVIDED

3.22 in.

(81.7mm)

4.83 in.

(122.7mm)

DRILL POINT LOCATION TOP AND

BOTTOM FOR 1/2” CONDUIT

FITTINGS. DRILL AS NEEDED.

ELECTRICAL BOX

2.10 in.

(53.3mm)

DRILL (4) 3/16 in.

DIAMETER HOLES

WALL ANCHOR

(4) PROVIDED

WITH KIT-71100A

INPUT

12 VDC, 0.42 A 24 VDC, 0.22 A

LENS TAMPER

N.C. DRY CONTACT

0.05 A @ 12 VDC

OPERATING TEMPERATURE

-4°F TO 140°F (-20°C TO 60°C)

WIRE LEADS

Housing Installation

1. Loosen screw with 3/32 HEX KEY.

2. Pull bottom of housing out and lift up until tabs are released from slots in top of siren/strobe assembly.

Wire Connections

WHITE - TAMPER GREEN - TAMPER BLUE - STROBE YELLOW - SIREN BLACK - GROUND

CONTROL W/POWER SUPPLY

- ALARM ON TRIGGER CLOSE

STROBE & SIREN

YEL (+)

BLK (-)

(NOT PROVIDED)

SIREN

SIREN ONLY

YEL (+)

BLK (-)

(NOT PROVIDED)

STROBE

STROBE ONLY

YEL (+)

SIREN

BLU (+)

TRIGGER

BLU (+)

TRIGGER

BLU (+)

GREEN

WHITE

GREEN

WHITE

GREEN

WHITE

TRIGGER

(NOT PROVIDED)

TAMPER SWITCH TO SUPERVISORY PANEL (OPEN DOES NOT SOUND ALARM)

WARNING: This product can expose you to chemicals including Dichloromethane, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Three year warranty or a one year limited warranty (from date of purchase) on most products.

INSTALLATION OF STI-SA5600 SELECT ALERT SIREN/STROBE

All speciﬁcations and information shown were current as of publication and are subject to change without notice.

SA5600IS MARCH2020

S2 - STROBE CONTROL (1)

HOR

1100A)

RILL (4) . HOLES

1 2 3 4 5 6 7 8 9 FUNCTION * 1 1 1 LEFT TO RIGHT FLASHING (30cyc/ 1 min)

1 2 3 4 5 6 7 8 9

ON O 1 1 BREATHING ( 12cyc/1 min) 1 O 1 FLASHING (120 cyc/1 min) O O 1 FLASHING (90 cyc/1 min) 1 1 O FLASHING (60 cyc/1 min) O 1 O INDIRECT FLASHING (50 cyc/1 min) 1 O O INDIRECT FLASHING (30 cyc/1 min)

Strobe (1)

Siren (2)

O O O CONTINUOUS (SOLID LIGHT) S2 - ALARM TONES (2) 1 2 3 4 5 6 7 8 9 FUNCTION * 1 1 1 1 1 1800Hz - 3300Hz @ 150ms O 1 1 1 1 500Hz - 1200Hz, 0.5s/ 0.5s OFF x 3/1.5s OFF (AS1670 EVACUATION) 1 O 1 1 1 520Hz, 0.5s / 0.5s OFF x 3/1.5s OFF (FIRE) O O 1 1 1 1200Hz - 500Hz @ 1Hz (DIN 33 404) 1 1 O 1 1 500Hz - 1200Hz, 3.75s ON / 0.25s OFF (AS2220) O 1 O 1 1 550Hz/440Hz @0.5 Hz 1 O O 1 1 970Hz, 0.5s/ 630Hz, 0.5s O O O 1 1 800Hz / 1000Hz 0.5s each (1Hz) 1 1 1 O 1 1500Hz - 2700Hz @ 3Hz O 1 1 O 1 800Hz / 970Hz @2Hz 1 O 1 O 1 800Hz, 0.25s ON/ 1s OFF O O 1 O 1 2400Hz - 2900Hz @ 9 Hz 1 1 O O 1 750Hz O 1 O O 1 970Hz 1 O O O 1 970Hz, 1s OFF/1s ON O O O O 1 500Hz - 1200Hz, 3.5s ON/ 0.5s OFF (NEN 2575:2000 DUTCH SLOW WHOOP) 1 1 1 1 O 800Hz - 970Hz @1Hz O 1 1 1 O 1000-2500Hz, 0.5s/ 0.5s OFF x 3/1.5s OFF (AS1670 EVACUATION) 1 O 1 1 O 2850Hz, 0.5s ON/0.5s OFF x 3/1.5s OFF (ISO 8201) O O 1 1 O 660Hz 1.8s ON/1.8s OFF 1 1 O 1 O 500Hz - 1200Hz @ 0.33Hz O 1 O 1 O 250Hz - 1200Hz @ 12Hz 1 O O 1 O 2400Hz O O O 1 O 800Hz / 970Hz @9Hz 1 1 1 O O 510Hz, 0.25s/ 610Hz, 0.25s O 1 1 O O 550Hz, 0.7s/1000Hz, 0.33s 1 O 1 O O 660Hz 0.15s ON/0.15s OFF O O 1 O O 800Hz - 970Hz @ 3Hz 1 1 O O O 420Hz 0.625s ON/0.625s OFF (AUSTRALIA AS1670 ALERT TONE) O 1 O O O 554Hz, 0.1s/440Hz, 0.4s (AFNOR NF S 32 001) 1 O O O O 970Hz, 0.5s ON/0.5s OFF x 3/1.5s OFF (ISO 8201) 0 O O O O 2400Hz - 2900Hz @ 3 Hz S2 - VOLUME (3) 1 2 3 4 5 6 7 8 9 FUNCTION * 1 VOLUME - HI O VOLUME - LOW

*Default

INSTALLATION OF STI-SA5600 SELECT ALERT SIREN/STROBE

All speciﬁcations and information shown were current as of publication and are subject to change without notice.

Volume (3)

COVER SLOT

3/32 in. HEX KEY

SCREW

SA5600IS MARCH2020