Safety Technology International STI-SA5000 SERIES Installation Instructions
Select-Alert Alarm
Mini Controller
STI-SA5000 SERIES
Features
· Use as a cabinet alarm, door alarm,
link with push button/switch or as a
burglar alarm.
· Independent strobe and siren timing
of 15 seconds, 30 seconds, 60
seconds or continuous.
· Durable, polycarbonate construction.
· Includes ten high intensity LED’s.
· Siren offers 32 user selectable tones.
· Choose piercing 100 or 85 dB alarm.
We protect the things that protect you.
· For indoor use only.
· Available with amber, green, blue,
red or white lens.
· Includes a tamper switch which
triggers the alarm when unit is
being removed from a wall.
· Low battery indicator.
· Powered by a 9 VDC battery
(not included) or external 12 – 24
volts.
· One Form “C” dry relay contact
output.
®
CONTENTS
Warnings and Cautions .......................................................................................................page 3
Warranty Information ........................................................................................................... page 3
Dimensions ........................................................................................................................page 3
Specifications ..................................................................................................................... page 4
Electronic Setup .................................................................................................................. page 4
Alarm Tones ....................................................................................................................... page 5
Alarm Timing and Volume .................................................................................................... page 5
Terminal Strip Connections .................................................................................................. page 6
Mounting Options ................................................................................................................page 6
Electronics ..........................................................................................................................page 8
SELECT-ALERT ASSEMBLY PARTS LIST
1 - 05000 Electronics Assembly
1 - 05050 Color Lens
4 Screw #6 x 5/8 in.
4 Screw #8-32 x 3/8 in.
2 Screw #6 x 1 1/4 in.
2 Anchor #8-10
2 Screw #6-32 x 1 1/2 in.
1 #8-32 x 1/2 in. tamper screw
1 - 19016 Tamper wrench
ACCESSORIES
KIT-71100A-W Backbox kit
KIT-E18151 N.C. reed switch and magnet
KIT-SA505 Key switch mounting bracket (includes key switch & 2 keys)
EBAT-9VDC 9 volt battery
KIT-H18075 Additional replacement key
- 2 -
WARNINGS
FRONT
SIDE
4.75 in.
4.83 in.
3.05 in.
3.22 in.
3.25 in.
4.83 in.
3.25 in.
(83mm)
4.83 in.
(123mm)
2.73 in.
(69mm)
All units are recommended for indoor use. Unit must be tested periodically to verify the life of
battery. STI recommends you change the 9 Volt battery twice a year. When purchasing a SelectAlert, you will need to periodically test the connections to make sure audibles function at a sound
level to alert staff. Installer may need to purchase a simple audio-meter, typically available at your
local electronics store, to measure the sound in areas where the alarm is expected to be heard
during normal noise environment. Results from this test may prove it beneficial to purchase
additional Select-Alert units.
All specifications and information shown are current as of publication and subject to change
without notice.
WARRANTY
Three year warranty or a one year limited warranty (from date of purchase) on most products. See website
for details. Electronic warranty form at www.sti-usa.com/wc14.
WARNING: This product can expose you to chemicals including Dichloromethane, which is known to
the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California
to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.
DIMENSIONS
- 3 -
Loading...