FIRE PRODUCTS
STI Horn/Strobe Damage Stoppers
®
STI-1221E
PRODUCT OVERVIEW
This virtually indestructible cover (slotted for sounder/strobe unit) is specifically
designed to prevent vandalism and accidental damage to a signal unit of a fire alarm
system. Moulded in clear, thick UV-stabilised polycarbonate material with slots
allowing the sounder or fire voice speaker to be heard. There are a variety of spacers
available to accommodate larger sounder/strobe units and retrofits - as well as
weather resistance and surface mounted applications. Spacer B has a solid back and
is moulded with an integral mounting box. For extreme conditions where dampness,
water or dust are frequently present, we recommend using STI’s unique, new Enviro
Kit.
HOW IT WORKS
Both the cover and circular back box are moulded from clear, thick polycarbonate
material that is UV-stabilized against discolouration. It is backed by a three year
guarantee against breakage in normal use.
KEY FEATURES
General Information
· This super tough cover is designed
to provide maximum protection
against physical damage both
accidental and intentional.
· Three year guarantee against
breakage of polycarbonate in
normal use.
Design
· Protects sounder and strobe
units from vandalism and
accidental damage.
Construction
· Tough polycarbonate housing can
withstand the severest of knocks.
Installation
· Retrofits over the device to be
protected.
· Comes complete with mounting
hardware.
· Typical working properties of
polycarbonate are -40°C to 121°C
(-40° to 250°F)
Options
· Open back with conduit knockouts
and the slots allow the sounder to
be heard.
· Easy access for servicing
protected device.
· Optional depth spacers and
back boxes for weather proofing
are also available within this model
range.
STI Horn/Strobe Damage Stoppers
®
Dimensions and Technical Information
MODELS AVAILABLE
ST I-12 10A Horn/Strobe Damage Stopper cover and enclosed back box, 4” deep, weather resistant
ST I-12 10B Horn/Strobe Damage Stopper cover and enclosed back box with double-gang outlet box
ST I-12 10C Horn/Strobe Damage Stopper cover open back box with external mounting tabs
ST I-12 10D Horn/Strobe Damage Stopper cover and open back box with conduit knockout
ST I-12 10E Horn/Strobe Damage Stopper cover and open back box for flush mount
ST I -12 21A Strobe Damage Stopper cover and enclosed back box, 4” deep, weatherproof with drain vent, NEMA 3R
ST I -12 21A 4 X Strobe Damage Stopper cover and enclosed back box 4” deep, weatherproof, NEMA 4X
ST I -12 21B Strobe Damage Stopper cover and solid enclosed back box and double-gang outlet box
ST I -12 21C Strobe Damage Stopper cover and open back box with ex ternal mounting tabs
ST I -12 21D Strobe Damage Stopper cover and open back box with conduit knockout
ST I -12 21E Strobe Damage Stopper cover and open back box for flush mount
KI T- 8 4 Tamper resistant screws
KI T-12 1 Enviro kit for D and E models
KI T-12 2 Enviro kit for B and C models
KIT-06297D “D” spacer only
KIT-06297E “E” spacer only
ST I -12 83 Backplate for “D” and “E” models
190 3 8 Bit for tamper resistant screws
KIT-6297B20 3/4” conduit hub for “B” and “C” back box
APPROVALS
It has been tested and approved or listed by:
• Under writer Laboratories and Canadian UL File S7025
• cUL approval for UL 1638 only
• CSFM needs local approval
• MEA STI-1210 and STI-1221 series only
• UL Listed for fire voice speakers for STI-1210 series only
• ADA Compliant
SPACERS
A = Enclosed back box, 4” deep (includes neoprene gasket)
A4X = Enclosed back box, 4” deep NEMA 4X (includes silicone gasket)
B = Enclosed back box with double-gang outlet box
C = Open back box with ex ternal mounting tabs
D = Open back box with conduit knockout
E = Open back box for flush mount
Adhesive
backed gasket
(1) provided
"O" ring gasket
(1) provided
STI-1210E & STI-1221E
Conduit gasket
(1) provided
Existing
insert
KIT-121
KIT-121
STI-1210D & STI-1221D
D spacer (pre-existing)
Adhesive backed
gasket (1) provided
UK Office
E spacer
(pre-existing)
"O" ring gasket
(1) provided
Standoff blocks
(4) provided
KIT-122
STI-1210C & STI-1221C
B spacer (pre-existing)
Gasket
(1) provided
KIT-12 2
STI-1210B & STI-1221B
Gasket (1) provided
C spacer (pre-existing)
Gasket
(1) provided
USA Head Office
© 1987-2018 Safety Tech nolog y Intern ational Ltd. 1210_HornStrobeDamageStoppers_Rev1218
in
info@sti-usa.com