Safety Technology International STI Exit Sign Damage Stopper Data Sheet

WIRE GUARDS

STI EXIT SIGN
DAMAGE STOPPER

®

STI-9640

PRODUCT OVERVIEW

Wherever exit signs are at risk from either intentional or accidental damage,
installation of our super tough wire guard is the solution to the problem. Four sizes
available to cover a wide range of exit sign models available today. Installation is
simple with anchors and screws provided.

BACKED BY A THREE YEAR GUARANTEE

As all STI protective covers, this Stopper is backed by a three year guarantee against
breakage in normal use. It is constructed of 9-gauge, welded steel wire, coated
with a tough, corrosion resistant polyester shell. To provide even greater protection
against vandalism, tamper resistant screws and a matching bit are available.

KEY FEATURES

General Information

· Guards help protect exit signs
against vandalism and accidental
damage.

· For use in controlled environment
(not intended for outdoor use ).

· Three year guarantee against
breakage in normal use.

Design

· Guard may reduce projected light
values. Verify correct exit light
requirements when using guard
(NF PA 101).

Construction

· Super tough construction of
9-gauge coated steel wire makes it
extremely difficult to break.

Installation

· Fast and easy installation.

· Flexible mounting options with
moveable mounting clamps.

· Simple removal for light bulb
replacement.

· May be painted prior to installation.

Options

· Four sizes available to cover a wide
range of exit signs.

· Tamper resistant hardware is
available.

STI Exit Sign Damage Stopper

13.5 in.

(343mm)

2.75 in.

(69.8mm)

10.5 in.

(266.7mm)

ANCHOR

(4) PROVIDED

DRILL (4) .25 in.

6.3mm HOLES

Dimensions and Technical Information

®

MODELS AVAILABLE

STI-9640 Exit Sign Damage Stopper
ST I - 9 74 0 Exit Sign Damage Stopper
ST I - 9 741 Exit Sign Damage Stopper Ceiling Mount
STI-9742 Exit Sign Damage Stopper Wall Mount
KI T- 82 Tamper resistant stainless steel screws, # 8 X 1 1/2 in.

snake eye (quantity 4)

KI T-19 0 3 8 Tamper bit for tamper resistant screws

NOTICE:

When lights are used for emergency exit corridor lighting, this guard
can reduce projected light reading on floor. Verify field conditions as
required by NFPA 101 life safety.

MODEL HEIGHT WIDTH DEPTH

STI-9640 10.5 in. (267mm) 13.75 in. (349mm) 2.75 in. (70mm)
STI-9740 15.5 in. (394mm) 20.5 in. (520mm) 6 in. (152mm)
STI-9741 16 in. (406mm) 14.8 in. (376mm) 5.35 in. (136mm)
STI-9742 16 in. (406mm) 15.6 in. (396mm) 3.3 in. (84mm)

WARRANTY

Three year guarantee against breakage in normal use.

WIDTH

FRONT VIEW

TOP VIEW

HEIGHT

DEPTH

Printed in U.S.A., © 1987-2020 Safety Technology International, Inc.

03/20Subject to change without notice.