Quick Start Guide
SafeLogin
The SafeLogin USB Dongle is part of an overall
logical access solution, which includes a
mobile APP and Credential Manager, designed
to replace traditional passwords, smartcards
and tokens.
Insert the SafeLogin Dongle into a free
USB port on your computer
If your organization is not setup yet, you will need
to enroll within the Credential Manager. Enter the
Safetrust portal www.safetrust.com, and select
"log-in" at the top right menu and enroll as a new
user. If an account is setup already advance to
step 5.
Select Mange Identity Systems from the
menu. Selecting the ADD at the top will permit
defining of each building system(s).
Define the Identity System by name,
description, and credential activation distance.
Under Identity System type select "Logical
Access"
Within the Manage People section each user is
loaded into the Logical Access system as
previously defined.
Viewing a users credentials that are listed by
System assigned, expiration date, credential image
(visible within their Wallet), and if their credential is
visible (some executives may want to hide their
image from others). A credential can be removed or
edited with the corresponding button.
As a logical access solution certificates can be
loaded within the users credential setup. Load
a PFX file and passcode for each certificate
that has been assigned to the user.
.
Safetrust
.com
Quick Start Guide
SafeLogin
Open the SafeAccess APP and select Admin
Installer when within range of SLBRE. If the Amin
Installer option is not visible, go back to the
SafeAccess Portal and add that role. Once open
highlight SLBRE and select configure.
Select the Identity System, complete the location
and description. Then calibrate the SLBRE. Once
complete save the profile.
If the profile was successfully saved the new
description will be loaded with a unique serial number
assigned.
C
OMPLIANCE WITH FCC RULES AND REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the
following measures:
* Increase or decrease the separation between the equipment and receiver.
* Consult the dealer or an experienced remote control/ TV technician for help.
This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is
cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's
authority to operate this equipment.
FCC Authorization Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2 This device must accept any interfere nce received, including interference th at may cause undesired operation.
Open the Wallet and select the credential registered to
the system. The LED should be green if within range
or yellow if on the fringe of the pattern. If the LED is
not illuminated the credential may not be on the same
system as the USB Dongle.
Login or Logout by presenting your phone within
the range preset during account set up in the
Credential Manager. Within the APP Settings
more or less sensitivity can be adjusted under Tap
in or Tap Out.
Responsible Party:
Safetrust, Inc.
8112 Mill Creek Rd Fremont, CA. 94539 USA
FCC ID: GC823502
IC: 23133-SL100
IC Statement
This device complies with Industry Canada license-exempt RSS stan dard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference; and (2) This device must accept an y interference, inclu ding interference
that may cause undesired operation of th e device.
Le présent appareil est confo rme aux CNR d’Industrie Canada applicables aux appareils radio exempts d e licence .
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage , et (2) l’utilisateur de
l’appareil doit accepter tout bro uillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
RF Exposure
The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm be tween the
radiation source (antenna) and any individ ual. This d evice may not be installed or used in conjunctio n with any other antenna
or transmitter.
l’exposition aux RF
.
L’antenne (ou les antennes) doit tre install e de fa on maintenir tout insta nt une distance minimum de au moins 20 cm e ntre la
source de radiation (l’antenne) et toute personne physique.
Safetrust
.com
Loading...