Safescan TA-800 User Manual

Installation

Place the installation CD-ROM in the drive and double click the file: [TimeAttendantSetup].
The installer starts and after approval of the users licence conditions the file location is
determined. The standard location is c:\Program Files\Safescan\TA3. Click [Browse] to
change this location.

Then click [Next] to continue. The program is installed.
Click [Finish] to complete the installation.

Set up software

Fill in the license code (you can find the license on the CD “serial.txt)

1

If you don’t have a SuperAdmin configured (on the terminal) you will see this message.

If you forgot your password, you can press the forgot Pw button and re-enter the license code.

You can manually change a user to SuperAdmin in the software (Users/Departments) and
then you are required to create a password. (see the explanation for User)

2

You can change the language in the settings screen. Save and restart the program to load the
new language set up.

3

Version upgrade

When you already have users and logs in a previous software release you can create a backup
and restore the user and log files in the latest software.

Synchronisation

If you want to connect a terminal to your network via TCP/IP, you will need to assign the
terminal an unused IP address.

You have 2 options for this.

Option 1

In the settings screen click Scan for new devices. If it finds a new device, click on OK. If you
have a Comm. Key created on the terminal type in the Comm. Key.
Press Save and after that Refresh. When the terminal is connected the status will be green.

4

Option 2

Find your IP address range

5