SafeMark Systems LP SAFEMARK51D Users Manual
SAFEMARK SYSTEMS LP SAFE FCC ID: TZ2SAFEMARK51D
USER’S MANUAL
◆TO PROGRAM SAFE
1. “*”+ “*” + 1113 + “*+ 6
2. Enter four digits of serial number + “#”
3. Enter first master code + “#”
4. Enter second master code + “#”
5. Enter four digits room number + “#”
6. Enter the connecting transmitter number + “#”
To set the next safe
Repeat step “5” and “6”
IMPORRANT: THE FACTORY DEFAULT SETTING OF THESE CODES MUST
BE CHANGED FOR EACH HOTEL AT THE TIME OF INIITIAL INSTALLATION
TO ENSURE MAXIMUM SECURITY.
◆ TO CLOSE SAFE
Press in user’s code (4 digits)
Press “#” button to lock safe
The door will automatically close
NOTE: AFTER DOORCLOSED, THE USER’S CODE WILL BE SHOWN AGAIN TO REMIND
USER.
◆ TO OPEN SAFE
Press in user’s 4digits code
Door will automatically open.
◆ TO SET CLOCK
Open safe by either master code or EHO one times
Press”*” button twice
Enter 807027 + “#”
Enter Year (2 digits) + Month (2digits) + Date (Two digits)
Press “#” button to change to second window
Enter Hour (2digits) + Minutes (2digits) + Second (2digits)
Press “#” button to confirm all the setting
◆ TO SET FIRST MASTER CODE
Open safe by either master code or EHO one times
Press”*” button twice
Enter 720708 + “#”
Enter the first old master code (factory default setting is 999999)
Enter new 6 digits as first master code
Press “#” button to confirm all the setting
Shenzhen Most Electronic Co., Ltd. Report No. MT-E0511456
SAFEMARK SYSTEMS LP SAFE FCC ID: TZ2SAFEMARK51D
◆ TO SET SECOND MASTER CODE
Open safe by either master code or EHO one times
Press”*” button twice
Enter 630689 + “#”
Enter the second old master code (factory default setting is 888888)
Enter new 6 digits as first master code
Press “#” button to confirm all the setting
FCC NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Shenzhen Most Electronic Co., Ltd. Report No. MT-E0511456
Loading...