GPS TRACKER USER MANUAL
Function:
GPS continous locating, uploading timely by GPRS.
Surport SMS locating inquiry.
Real-time voice monitoring.
GSM global quad band frequency.
3 SOS number for remote monitoring and alarm.
Low power alarm function
Preparation before operating
1.1 unpack the giftbox, check if the model No and the accessories is right. If
found anythng is wrong, please contact your retailer.
1.2 The terminal needs to insert one GSM SIM card, please choose the SIM
card under your retailer’s advice.
1.3 Make sure the terminal is powered off before inserting or taking out the
SIM card.
1.4 The SIM card in the terminal needs to have GPRS function.
1.5 The SIM card in the terminal needs to have caller ID function.
1.6 Parameters directive format all need small case letters, and all the setting
up directives will get respond message. If the setting is right, the message will
response “setting ok”, otherwise you need to reset.
How to operating
Service center number setting up
2.1 You need to preset service center numbers if you need operating inquiry
monitoring directives by SMS, and the terminal will only response to the SMS
directive from the services center numbers.
2.2 Please add the country code when setting the centre number, the oringinal
password is 123456.
2.3 Adding services center nunber directive: CENTER,A, center number#
Ex: CENTER,A,123456789#
If services center number setting successfully, will get “ center number setting
successfully!” or “OK”
Ps: can only set up one service center number and the center number must be
SOS number.
Service number delete
3.1 Deleting center nunber directive: CENTER, D#, terminial will response
“OK” if success.
Adding SOS numbers
4.1 Sending SMS text by center number cellphone could set SOS numbers,
total 3 numbers.
4.2 Adding SOS numbers directive: SOS,A,Number 1,Number 2, Number3#
Ex: SOS,A,123456789,987654321,55555555#
4.3 Terminal will response “SOS (1,2,3) numbers setting success or OK!” when
SOS numbers setting successfully.
Delete SOS numbers
5.1 If need to delete certain numbers, could send inquiry parameter directives
to terminal, and get the sequence No of certain numbers, then sending delete
directives SMS to the terminal to delete it.
5.2 Three ways to delete directive numbers
1. SOS, D, 1, 2, 3# (Delete muti numbers)
2. SOS, D, number sequence#
3. SOS, D, number#
5.3 If delete SOS numbers successfully, terminal will response “SOS numbers
delete successfully or OK!”
Inquiry parameter setting up
6.1 When you need to inquire terminal parameters setting status, need to send
parameter setting up SMS text to terminal SIM card number, terminal will
respond corresponding parameter setting figurations.
6.2 Inquire parameter directive format:PARAM#
Work mode and work mode setting up
7.1 Mode 1(Standard mode)
GPS terminal continuous working, upload data timely.
7.2 Mode 2(Power saving mode)
Terminal GPS will upload data imediately when locating success, then turn to
sleeping mode, every 10minutes later will turn on GPS automatically.
7.3 Mode 3(Base station locating mode)
GPS not working, inquire base station locating data to upload. GPS will wake
up when center number called or sending message, then go into sleeping
mode 2 mins later.
7.4 Mode4 ( no platform mode, minimum of power consumption)
This mode does not require platform. It only replies when using url# SMS to
check google map and link.
Setting GPRS time interval of transmission position data
Default GPRS time sending interval can be set separately. If default GPRS
Loading...