Page 1
an LDI Company
New Hope, MN 55428
Visit us on the web:
www.safcoproducts.com
Mobile Machine Stand
ASAS
AS
ASAS
TOOLS REQUIRED: Short Handled Phillips Screwdriver; Hammer or Mallet (Two People Recommended)
SEMBLSEMBL
SEMBL
SEMBLSEMBL
Y Y
Y
Y Y
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
1851
PRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com
E
D
A
Z
B
O
T
H
V
W
K
§ Note: When corresponding about parts, be sure to state color:
Gray (GR), Mahogany (MH) or Medium Oak (MO).
For questions or concerns, please call
L
O
ASSEMBLED UNIT
MODEL 1851
N
F
M
Q
P
Safco Consumer Hot Line 1-800-664-0042
available Monday-Friday 8:00 AM to 4:30 PM (Central Time)
(English-speaking operators)
J
X
G
O
I
C
Y
W
U
K
S
R
Sort and count your parts!
PARTS LIST
LETTER
CODE
Back Panel 1 1850-01§
A
Left Side Panel 1 1851-03§
B
Right Side Panel 1 1851-04§
C
Short Back Panel 1 1851-01§
D
Top Panel 1 1850-05§
E
Fixed Shelf 1 1851-06§
F
Tall Screw Post 16 HFFMFB
G
Tall Cam 16 HFFMFC
H
Short Screw Post 4 HMF12B
I
Short Cam 4 HMF12
J
Caster Bracket 4 1854-10
K
Machine Screw, 5/8”L 8 1850-22
L
Bottom Panel 1 1850-02§
M
Kick Panel 1 1850-07§
N
Wood Dowel 8 H8MMDWL
O
Swivel Caster with Brake 2 8917-24
P
Swivel Caster without Brake 2 8917-25
Q
Hinge 4 8919-16
R
Hinge Mount Plate 4 8919-14
S
Left Door Panel 1 1850-08§
T
Right Door Panel 1 1850-09§
U
Handle 2 8962-31
V
Long Screw, 1”L 4 1850-23
W
Divider 1 1851-07§
X
Shelf Peg 24 HSFBNZ
Y
Small Shelf 6 1851-08§
Z
DESCRIPTION QTY. PART NO.
V
1851-37: 1 of 4; Rev. 3; 09/06
Safco Products Company, New Hope, MN 55428
Page 2
IMPORTANT
READ and FOLLOW these instructions carefully!
CHECK ALL PACKAGING - there may be parts in it!
SORT and COUNT your parts - compare with the parts list on page 1.
Work on a smooth and clean surface. Arrange the A Back
1
Panel, B Left Side Panel and C Right Side Panel with the
holes facing up as shown.
Place the D Short Back Panel
above the A Back Panel with large
holes up and insert J Short Cams
in the Short Back Panel. Arrange
the F Fixed Shelf below the Back
Panel and insert H Tall Cams in the
large corner holes of the Back
Panel and Fixed Shelf.
Insert two H Tall Cams in the two
large holes at the upper end of the
side panels, and insert two I Short
Screw Posts in the holes at the
upper center of each side panel.
Screw six G Tall Screw Posts into the small
holes in the upper, lower and back edges
of each side panel as shown. Fasten two K Caster
Brackets to the bottom end (unfinished edge) of each side
panel using two L 5/8” Machine Screws each.
Place the E Top Panel above the Short Back Panel with the
six small holes upward; screw four G Tall Screw Posts into the
corner holes.
B
D
H
I
UNFINISHED
EDGES
E
L
K
G
J
A
Insert two O Wood Dowels into both ends of
the N Kick Panel and the X Divider.
O
X
I
H
C
H
K
N
O
L
F
Raise the A Back Panel so it is perpendicular to the
2
B Left Side Panel. Align the two Screw Posts at the
back end of the Side Panel with the corresponding
holes on the Back Panel. With the arrows on the
Cams pointing toward the Screw Posts, guide the
holes over the Screw Posts and fasten by turning
each of the engaged cams CLOCKWISE as far as
they can turn. Install the D Short Back Panel in a
similar manner.
IMPORTANT: to prevent possible damage during
assembly, a second person should help support the
back panel in its upright position (or prop upright
with appropriate materials).
D
B
Position the F Fixed Shelf with the Cord Cutout next
3
to the A Back Panel, and the side with cams toward
the bottom end of the side panel. Align the two
Screw Posts on the Left Side Panel with the corresponding holes on the edge of the Fixed Shelf. With
the arrows on the Cams pointing toward the Screw
Posts, insert the Screw Posts and fasten by turning
each of the engaged cams CLOCKWISE as far as
they can turn. Insert the screw posts on one end of
the M Bottom Panel into the holes on the bottom
end of the Left Side Panel and fasten the cams .
CORD
CUTOUT
F
A
A
M
1851-37: 2 of 4; Rev. 3; 09/06
FRONT;
FINISHED EDGES
Safco Products Company, New Hope, MN 55428
BOTTOM
END
Page 3
Insert one dowel end of the N Kick Panel into the
4
Left Side Panel in the holes furthest from the Back
Panel.
Lift the C Right Side Panel over the assembled
5
panels. Align the Screw Posts with the corresponding holes on the Back Panel, Bottom Panel and
Fixed Shelf (also guide the Wood Dowels on the
Kick Panel into the holes in the side panel), then
fasten by turning each of the eight cams CLOCKWISE as far as they can turn.
C
N
FRONT
Push the two P Swivel Casters with Brakes
6
into the sockets of the Caster Brackets at
the front of the unit. Push the two Q
Swivel Casters without Brakes into the
Caster Brackets near the back side of the
unit.
Use a soft hammer or mallet to tap the R Hinges into the
7
recesses on the T Left Door Panel. Use the pre-installed
screws to fasten the S Hinge Mount Plates into the pre-drilled
holes on the Left Side Panel. If the Hinge and Mount came in
separate pieces, bend the arms of the Hinges and insert the
slots of the arms over the Hinge Mount Plate set screws. Adjust
door position and tighten the set screws. Turn
SLOT
ARM
SET
SCREW
Q
P
the unit onto its right side, and repeat with the
U Right Door Panel.
R
U RIGHT DOOR PANEL
NOT SHOWN
FRONT
1851-37: 3 of 4; Rev. 3; 09/06
TIGHTEN
SET
SCREW
Safco Products Company, New Hope, MN 55428
S
R
T
LEFT
SIDE
PANEL
S
R
Page 4
With two people, carefully stand the unit upright.
8
Fasten one V Handle to the outer side of the Left
Door Panel using two W Long Screws. Fasten
the other Door Handle to the outer side of the
Right Door Panel with two more Long Screws.
If necessary, center the Door Panels by adjusting
the set screws on the Door Hinges as needed.
V
Position the X Divider with the finished edge toward
9
the front of the unit, and insert the dowels into the
holes in the center of the F Fixed Shelf.
X
FRONT;
FINISHED EDGE
F
V
W
Lower the E Top Panel down onto the side panels
10
and divider. Guide the Dowels in the Divider into the
center holes in the Top Panel, and guide the Screw
Posts into the holes on the upper edges of the side
panels. Fasten by turning each of the four cams
CLOCKWISE until they stop.
E
Insert Y Shelf Pegs into the small holes in both
11
compartments in the configuration you desire using
four pegs per shelf. Place Z Small Shelves onto the
Shelf Pegs.
Prevent the assembled unit from rolling by activating
the brakes on the Swivel Casters with Brakes.
Y
Z
1851-37: 4 of 4; Rev. 3; 09/06
BRAKES
Safco Products Company, New Hope, MN 55428
Loading...