an LDI Spaces Company
Minneapolis, MN 55428
www.safcoproducts.com
PRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com
Computer Desk (or Fax/Printer Stand)
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: Phillips Screwdriver
1930
1931
1934
PARTS LIST
CODE DESCRIPTION
Modesty Panel: 1930 1 193004
A
1931 1 193104
1934 1 193404
B
Left Leg 1 193002
C
Right Leg 1 193003
D
Screw 8 193024
E
Shelf: 1930 1 193005
1931 1 193105
1934 1 193405
F
Top Panel: 1930 1 193001
1931 1 193101
1934 1 193401
G
Carriage Bolt 4 193022
H
Barrel Nut 4 193023
I
Glide 4 193027
HARDWARE PACK: 193019
D
G
QTY.
PART NO.
H
A
F
G
E
C
H
D
B
I
I
Screw
Attach the A Modesty Panel to the B
1
Left Leg and the C Right Leg with two
Carriage Bolt
D Screws per side.
100193037: 1 of 2; Rev A: Rev Date
28-JUN-2016
Barrel Nut
Glide
ASSEMBLED UNIT
A
D
B
For questions or concerns, please call the Safco Consumer Hot Line 1-800-664-0042
available Monday-Friday 7:30 AM to 5:00 PM (Central Time) (English-speaking operators)
C
2
Insert a D Screw in the hole at the inside
front of each Leg, but do not tighten completely; leave about 1/16” gap. Place the
E Shelf between the Legs, with the back
fl ange resting in the bottom fl ange of the
Modesty Panel, and guide the slots at the
sides of the Shelf behind the Screws. Fasten Shelf to lower corners of the Modesty
Panel with two additional Screws. Now
tighten the front Screws.
E
D
The F Top Panel can be mounted
3
with either side up; select the side
you prefer, and slide it into the top
channels of the Legs (the cord cutout
should be facing toward the back).
Insert a G Carriage Bolt (with the
square neck) into each square hole
in the Legs, through the Top Panel,
and fasten with a H Barrel Nut.
HANG BACK OF SHELF
ON MODESTY PANEL
G
H
HANG FRONT OF
SHELF ON SCREW
F
Carefully lay the unit on its back. Screw
4
a I Glide into the front and back hole
of each Leg. Set the unit upright. Adjust
Glides to make unit level.
ATTENTION:
Please CENTER load over Legs
at rear of unit. Do NOT place
heavy loads at front.
100193037: 2 of 2; Rev A: Rev Date 28-JUN-2016
I
Safco Products Company, New Hope, MN 55428
Loading...