Product Dimensions:25-1/5"WX11-4/5"DX63"H
PIECE QUANTITY
A 2X
B 1X
C 3X
D 1X
E 4X
H1 8X
H2 16X
H3 16X
H4 1X
DESCRIPTION
PICTURE
CARE AND MAINTENANCE
Always use felt pads under allarticles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes,harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
Side panels
Allen key
Box
shelf
Allen bolt L
M6X30mm
Allen bolt S
M6X15mm
Screw
Top Panel
Metal legs
H5
2X
H6
2X
H72XH8 4X
H9
2X
Step 1 Step 2
Attach the Screw(H3) to Side panel(A) Attach the Box(B) to Side panel(A), using Allen bolt(H1)
Tighten with philps driver
Tighten with Allen key(H4）
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
Nylon Strap
Short Screw
M3*16mm
Long Screw
M4*25mm
Plastic Screw Anchor
Wall Bracket
2
1
Step 3 Step 4
Attach the Shelf(C)to Side panel(A) Attach the Top panel(D)to Side panel(A)
Tighten with philips driver Tighten with philips driver
Step 5 Step 6
Attach the Side panel(A)to the Box(B), using Allen bolt(H1) Attach the Top panel(D)and Shelf(C)to Side panel(A)
Tighten with Allen key(H4）
Tighten with philips driver
4
3
6
5
Step 7 Step 8
Attach the Metal legs(E) to Box(B),using Allen bolt(H2) For safety concerns, please use the Anti-tip kit with this product
Tighten with Allen key(H4）
7
8
Loading...