CARE AND MAINTENANCE
Always use felt pads under all articles to prevent
discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood.
Wipe up spills immediately and avoid common hazards
such as hot dishes, harsh solvents and abrasives.Cleaning
should be done with a soft lint free cotton cloth
dampened with water or furniture polish.On highly used
surfaces we recommend applying a quality paste wax
which should be used on a regular basis to provide
additional protection from scratches and spills. How often
you apply the wax depends on how much wear the
furniture receives.
NOTICE
*Please make sure that you have all parts indicated before
you begin assembly of this item
*This item should be assembled on a soft surface to
prevent scratching the finish during assembly
*This item may require periodic tightening
Part List
PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
D
E
DESK TOP 1X
BOTTOM FRAME
ACRYLIC SUPPORT POLE
BOLT
ALLEN WRENCH
1X
4X
8X
1X
Before
beginning
assembly
of
product,
make
sure all parts
are present. Compare parts with package contents list. If
any part is missing or damaged, do not attempt to
assemble the product.
Estimate Assembly Time:13 minutes
E
D
4
2
2
1
1
4
3
3
A
Step 1
Remove all of the components from their boxes and place them on a carpeted or scratch-free
surface.Insert the Support Poles (C) into the Desk Top (A) and secure them by Screws (D). Tighten
the Screws by Allen Wrench (E).
E
B
6
6
5
5
8
7
8
7
D
Step 2
Place the Bottom Frame (B) on top of the Support Pole (C) and secure them with Screws (D). Tighten the
Screws by Allen Wrench (E).
Step 3
Upright the assembled Desk. Assembly is completed.
Loading...